DEM Modeling Mechanical Behavior of Unsaturated Structural Loess under Constant Stress Increment Ratio Compression Tests
Publication: International Journal of Geomechanics
Volume 17, Issue 4
Abstract
This paper presents a numerical investigation into the macromechanical and micromechanical behavior of unsaturated structural loess under constant stress increment ratio compression using the distinct-element method (DEM). Loess is typically a kind of clayey silt with a metastable structure composed of interparticle bonding and large voids. To represent the interparticle bonding, a published bond contact model proposed by the authors was used. Three samples with different water contents were tested under six incremental stress ratios to study the influence of water content and stress increment ratio on the mechanical response of loess. The DEM results qualitatively agree with available experimental observations in the literature. The observed macromechanical properties can be explained by the velocity field, force-chain distribution, bond breakage events, and contact orientation at the microscopic scale. When the stress increment ratio is low, the force chains exhibit a column-like pattern. As the stress ratio increases, bond breakage occurs uniformly and the force chains form a web-shaped pattern. As the water content increases, the force chains become denser and the number of broken bonds becomes larger. The compression and shear behavior of the specimens is related to the bond breakage at the microscopic scale. The main failure types are tension failures in the stress range studied irrespective of the stress increment ratio. The proportion of tensile failures increases with an increase in water content. In addition, the contact orientations and deviator fabrics of contacts are also studied.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is funded by the State Key Laboratory of Disaster Reduction in Civil Engineering (300 SLDRCE14-A-04) and National Natural Science Foundation of China with Grants 51179128 and 51579178, all of which are sincerely appreciated. The authors also thank Dr. Colin Thornton from the University of Birmingham, U.K., for his great contributions to writing this paper and valuable discussions on some work in this paper.
References
Anayev, V. P., and Volyanick, N. V. (1986). “Engineering geologic peculiarities of construction work on loessial soils.” Proc., 5th Int. Congress of the Association of Engineering Geologists, CRC Press, Boca Raton, FL, 659–665.
Balasubramaniam, A. S., and Hwang, Z. M. (1980). “Yielding of weathered Bangkok clay.” Soils Found., 20(2), 1–15.
Brandon, T., Duncan, J., and Gardner, W. (1990). “Hydrocompression settlement of deep fills.” J. Geotech. Eng, 1536–1548.
Cegla, J., Buckley, T., and Smalley, I. J. (1971). “Microtextures of particles from some European loess deposits.” Sedimentology, 17(1–2), 129–134.
Chen, C. L., Zhang, D. F., Dong, Y. Z., Chen, H., Yu, D. B., and Xue, J. X. (2014). “Suction and mechanical behaviours of unsaturated intact loess from constant water content triaxial tests.” Chin. J. Geotech. Eng., 36(7), 1195–1202 (in Chinese).
Chen, Z. H., Fang, X. W., Zhu, Y. Q., Qin, B., Wei, X. W., and Yao, Z. H. (2009). “Research on meso-structures and their evolution laws of expansive soil and loess.” Rock. Soil. Mech., 30(1), 1–11 (in Chinese).
Chen, Z. H., and Liu, Z. D. (1986). “Mechanism of collapsible deformation of loess.” Chin. J. Geotech. Eng., 8(2), 1–12 (in Chinese).
Callisto, L., and Calabresi, G. (1998). “Mechanical behaviour of natural soft clay.” Géotechnique., 48(4), 495–513.
Delage, P., Cui, Y. J., and Antoine, P. (2005). “Geotechnical problems related with loess deposits in Northern France.” Proc., Int. Conf. on Problematic Soils, Eastern Mediterranean University Press, North Cyprus, Cyprus, 517–540.
Derbyshire, E. (2001). “Geological hazards in loess terrain, with particular reference to the loess regions of China.” Earth Sci. Rev., 54(1), 231–260.
Dijkstra, T. A., Rogers, C. D. F., Smalley, I. J., Derbyshire, E., Li, Y. J., and Meng, X. M. (1994). “The loess of north-central China: Geotechnical properties and their relation to slope stability.” Eng. Geol., 36(3–4), 153–171.
Ding, X. B., and Zhang, L. Y. (2014). “A new contact model to improve the simulated ratio of unconfined compressive strength to tensile strength in bonded particle models.” Int. J. Rock. Mech. Min., 69, 111–119.
Gao, G. R. (1996). “The distribution and geotechnical proper ties of loess soils, lateritic soils and clayey soils in China.” Eng. Geol., 42(1), 95–104.
Gili, J. A., and Alonso, E. E. (2002). “Microstructural deformation mechanisms of unsaturated granular soils.” Int. J. Numer. Anal. Methods Geomech., 26(5), 433–468.
Grabowska-Olszewska, B. (1975). “SEM analysis of microstructures of loess deposits.” Bull. Int. Assoc. Eng. Geol., 11(1), 45–48.
Haeri, S., Khosravi, A., Garakani, A., and Ghazizadeh, S. (2016). “Effect of soil structure and disturbance on hydromechanical behavior of collapsible Loessial soils.” Int. J. Geomech., 04016021.
Holtz, W. G., and Hillf, J. W. (1961). “Settlement of soil foundations due to saturation.” Proc., 5th Int. Conf. Soil Mechanics and Foundation Engineering, Paris, 673–679.
Jiang, M. J., Chen, H., Tapias, M., and Arroyo, M. (2014a). “Study of mechanical behavior and strain localization of methane hydrate bearing sediments with different saturations by a new DEM model.” Comput. Geotech., 57, 122–138.
Jiang, M. J., Hu, H. J., and Liu, F. (2012). “Summary of collapsible behaviour of artificially structured loess in oedometer and triaxial wetting tests.” Can. Geotech. J., 49(10), 1147–1157.
Jiang, M. J., Konrad, J. M., and Leroueil, S. (2003). “An efficient technique for generating homogeneous specimens for DEM studies.” Comput. Geotech., 30(7), 579–597.
Jiang, M. J., Leroueil, S., and Konrad, J. M. (2004). “Insight into shear strength functions of unsaturated granulates by DEM analyses.” Comput. Geotech., 31(6), 473–489.
Jiang, M. J., Li, T., Hu, H. J., and Thornton, C. (2014b). “DEM analyses of one-dimensional compression and collapse behaviour of unsaturated structural loess.” Comput. Geotech., 60, 47–60.
Jiang, M. J., Yan, H. B., Zhu, H. H., and Utili, S. (2011). “Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses.” Comput. Geotech., 38(1), 14–29.
Jiang, M. J., Yu, H. S., and Leroueil, S. (2007). “A simple and efficient approach to capturing bonding effect in naturally microstructured sands by discrete element method.” Int. J. Numer. Methods Eng., 69(6), 1158–1193.
Jiang, M. J., Zhang, F. G., Hu, H. J., Cui, Y. J., and Peng, J. B. (2014c). “Structural characterization of natural loess and remolded loess under triaxial tests.” Eng. Geol., 181, 249–260.
Jiang, M. J., Zhang, W. C., Sun, Y. G., and Utili, S. (2013). “An investigation on loose cemented granular materials via DEM analyses.” Granular Matter, 15(1), 65–84.
Jiang, M. J., Zhu, F. Y., Liu, F., and Utili, S. (2014d). “A bond contact model for methane hydrate bearing sediments with inter-particle cementation.” Int. J. Numer. Anal. Methods Geomech., 38(17), 1823–1854.
Khosravi, A., Salam, S., McCartney, J., and Dadashi, A. (2016). “Suction-induced hardening effects on the shear modulus of unsaturated silt.” Int. J. Geomech., D4016007.
Kim, B. S., Park, S. W., and Kato, S. (2012). “DEM simulation of collapse behaviours of unsaturated granular materials under general stress states.” Comput. Geotech., 42, 52–61.
Kruse Gerard, A. M., Dijkstra, A. M., and Schokking, F. (2007). “Effect of soil structure on soil behaviour: Illustrated with loess, glacially loaded clay and simulated flaster bedding examples.” Eng. Geol., 91(1), 34–45.
Lagioia, R., and Nova, R. (1995). “An experimental and theoretical study of the behaviour of a calcarenite in triaxial compression.” Géotechnique, 45(4), 633–648.
Lawton, E., Fragaszy, R., and Hardcastle, J. (1991). “Stress ratio effects on collapse of compacted clayey sand.” J. Geotech. Engrg., 714–730.
Lawton, E., Fragaszy, R., and Hetherington, M. (1992). “Review of wetting-induced collapse in compacted soil.” J. Geotech. Engrg., 1376–1394.
Lei, S. Y., and Tang, W. D. (2004). “Analysis of microstructure change for loess in the process of loading and collapse with CT scanning.” Chin. J. Rock. Mech. Eng., 23(24), 4166–4169 (in Chinese).
Lei, X. Y. (1985). “Characteristics of loess pore distribution in North ShanXi and East GanSu.” Kexue Tongbao, 30(5), 656–661.
Li, T. L., Wang, C. Y., and Li, P. (2013). “Loess deposit and loess landslides on the Chinese loess plateau.” Progress of Geo-Disaster Mitigation Technology in Asia, W. Shan and T. F. Fathani, eds., Springer, Berlin, 235–261.
Lin, Z. G., and Shu, T. K. (1958). “Preliminary study of collapsibility of loess in northwest China.” Hydrogeol. Eng. Geol., 2(4), 1–7 (in Chinese).
Liu, D. S. (1985). Loess and the environment, China Ocean Press, Beijing (in Chinese).
Liu, D. S., and Zhang, Z. H. (1962). “Loess of China.” Acta Geol. Sin., 42(1), 1–14 (in Chinese).
Liu, S. H., and Sun, D. A. (2002). “Simulating the collapse of unsaturated soil by DEM.” Int. J. Numer. Anal. Methods Geomech., 26(6), 633–646.
Liu, Z. D., Lu, S. Q., Yang, T. L., and Li, B. Q. (1982). “The influence of stress path on the stress-strain behavior of earthfills and its application.” Chin. J. Geotech. Eng, 4(4), 45–55 (in Chinese).
Mendes, J., and Toll, D. (2016). “Influence of initial water content on the mechanical behavior of unsaturated sandy clay soil.” Int. J. Geomech., D4016005.
Milovic, D. (1988). “Stress deformation properties of macroporous loess soils.” Eng. Geol., 25(2–4), 283–302.
Muñoz-Castelblanco, J. A., Pereira, J. M., Delage, P., and Cui, Y. J. (2012). “The water retention properties of a natural unsaturated loess from northern France.” Géotechnique, 62(2), 95–106.
Obermayr, M., Dressler, K., Vrettos, C., and Eberhard, P. (2013). “A bonded-particle model for cemented sand.” Comput. Geotech., 49, 299–313.
Potyondy, D. O., and Cundall, P. A. (2004). “A bonded-particle model for rock.” Int. J. Rock. Mech. Min., 41(8), 1329–1364.
Pu, Y. B. (2000). “Research on CT structure changing for damping process of loess in Longdong.” Chin. J. Geotech. Eng., 22(1), 49–54 (in Chinese).
Schöpfer, M. P. J., Childs, C., and Manzocchi, T. (2013). “Three-dimensional failure envelopes and the brittle-ductile transition.” J. Geophys. Res. B: Solid Earth, 118(4), 1378–1392.
Shi, J., and Liu, Z. D. (1992). “The effect of the stress path on stress-strain relation of loess.” J. Northwestern Inst. Archit. Eng., 1, 10–14 (in Chinese).
Smalley, I. J., and Cabrera, J. G. (1970). “The shape and surface texture of loess particles.” Geol. Soc. Am. Bull., 81(5), 1591–1596.
Smalley, I. J., and Derbyshire, E. (1991). “Large loess landslides in active tectonic regions.” M. Jones and J. Ž. Cosgrove, eds., Neotectonics and resources, Belhaven Press, London, 202–219.
Smith, P. R., Jardine, R. J., and Hight, D. W. (1992). “The yielding of Bothkennar clay.” Géotechnique, 42(2), 257–274.
Sun, P., Peng, J. B., Chen, L. W., Yin, Y. P., and Wu, S. R. (2009). “Weak tensile characteristics of loess in China—An important reason for ground fissures.” Eng. Geol., 108(1), 153–159.
Utili, S., and Nova, R. (2008). “DEM analysis of bonded granular geomaterials.” Int. J. Numer. Anal. Methods Geomech., 32(17), 1997–2031.
Walker, L. K., and Raymond, G. P. (1969). “Anisotropic consolidation of Leda clay.” Can. Geotech. J., 6(3), 271–286.
Wang, G. H., Zhang, D. X., Furuya, G., and Yang, J. (2014). “Pore-pressure generation and fluidization in a loess landside triggered by the 1920 Haiyuan earthquake, China: A case study.” Eng. Geol., 174, 36–45.
Wang, Y. H., and Leung, S. C. (2008a). “A particulate-scale investigation of cemented sand behavior.” Can. Geotech. J., 45(1), 29–44.
Wang, Y. H., and Leung, S. C. (2008b). “Characterization of cemented sand by experimental and numerical investigations.” J. Geotech. Geoenviron., 992–1004.
Wang, Z. J., Luo, Y. S., Guo, H., and Tian, H. (2012). “Effects of initial deviatoric stress ratios on dynamic shear modulus and damping ratio of undisturbed loess in China.” Eng. Geol., 143–145, 43–50.
Wen, B. P., and Yan, Y. J. (2014). “Influence of structure on shear characteristics of the unsaturated loess in Lanzhou, China.” Eng. Geol., 168, 46–58.
Xu, L., Dai, F. C., Tham, L. G., Tu, X. B., Min, H., and Zhou, Y. F. (2011). “Field testing of irrigation effects on the stability of a cliff edge in loess, North-west China.” Eng. Geol., 120(1), 10–17.
Zhang, F. Y., Wang, G. H., Kamai, T., Chen, W. W., Zhang, D. X., and Yang, J. (2013). “Undrained shear behavior of loess saturated with different concentrations of sodium chloride solution.” Eng. Geol., 155, 69–79.
Zhang, T., Hu, Z. Q., Wu, X. H., and Chen, C. L. (2006). “Variation characteristics of soil structure of unsaturated loess under different stress paths.” Rock. Soil. Mech., 27(11), 1945–1948 (in Chinese).
Zhou, J., Zhang, G., and Kong, G. (2006). Meso-mechanics simulation of seepage with particle flow code.” J. Hydraulic. Eng., 37(1), 28–32 (in Chinese).
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 17 • Issue 4 • April 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 12, 2016
Accepted: Jun 16, 2016
Published online: Sep 22, 2016
Discussion open until: Feb 22, 2017
Published in print: Apr 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.