How Small Strain Stiffness and Yield Surface Affect Undrained Excavation Predictions
Publication: International Journal of Geomechanics
Volume 17, Issue 3
Abstract
This paper discusses how small-strain stiffness and some aspects of the yield surface affect the finite-element predictions of excavation responses, including wall and ground deformations. By using the in-house-developed constitutive model SC1SS, it is possible to isolate and quantify impacts brought about by selected aspects of the soil behavior. This soil model has been validated to reasonably model Taipei silty clay and deep excavations in such soil. This study shows that ignoring small-strain stiffness can overestimate deformations by as much as 80%, leading to conservative and costly design. Inclined yield surface and Lode-angle dependency (on deviatoric planes) have lesser effects on the prediction results. In addition, the mechanisms behind these impacts are investigated through numerical triaxial tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are very grateful to the Ministry of Science and Technology of Taiwan for the financial support for this study.
References
Abaqus [Computer software]. SIMULIA, Providence, RI.
Dang, H. P., Lin, H. D., and Juang, C. H. (2014). “Analyses of braced excavation considering parameter uncertainties using a finite element code.” J. Chin. Inst. Eng., 37(2), 141–151.
Dang, H. P., Lin, H. D., Kung, J. H., and Wang, C. C. (2012). “Deformation behavior analyses of braced excavation considering adjacent structure by user-defined soil models.” J. Geoeng., 7(1), 13–20.
Duncan, J. M., and Dunlop, P. (1969). “Behavior of soils in simple shear tests.” Proc., 7th Int. Conf. on Soil Mechanics and Foundation Engineering, Mexican Society for Soil Mechanics, Mexico City, 101–109.
Finno, R. J., and Calvello, M. (2005). “Supported excavations: Observational method and inverse modeling.” J. Geotech. Geoenviron. Eng., 826–836.
Hsieh, P. G., Kung, T. C., and Ou, C. Y. (2005). “Simulation of stress-strain curve under undrained condition with small strain stiffness of clay considered.” J. Southeast Asian Geotech. Soc., 36(1), 91–95.
Hsieh, P. G., and Ou, C. Y. (1998). “Shape of ground surface settlement profiles caused by excavation.” Can. Geotech., 35(6), 1004–1017.
Hsieh, P. G., and Ou, C. Y. (2011). “Analysis of nonlinear stress and strain in clay under the undrained condition.” J. Mech., 27(2), 201–213.
Hsieh, P. G., and Ou, C. Y. (2012). “Analysis of deep excavations in clay under the undrained and plane strain condition with small strain characteristics.” J. Chin. Inst. Eng., 35(5), 601–616.
Hsieh, P. G., Ou, C. Y., Kung, T. C., and Tang, Y. G. (2003). “Deep excavation analysis with consideration of small strain modulus and its degradation behavior of clay.” Proc., 12th Asian Regional Conf. on Soil Mechanics and Geotechnical Engineering, Vol. 1, World Scientific, Singapore, 785–788.
Hsieh, Y. M. (2014). “Cloud-computing based parameter identification system–with applications in geotechnical engineering.” Proc., Int. Conf. on Computing in Civil and Building Engineering, ASCE, Reston, VA, 1384–1392.
Kirkgard, M., and Lade, P. V. (1993). “Anisotropic three-dimensional behavior of a normally consolidated clay.” Can. Geotech., 30(5), 848–858.
Kung, G. T. C., Hsiao, E. C. L., and Juang, C. H. (2007). “Evaluation of a simplified small-strain soil model for analysis of excavation-induced movements.” Can. Geotech., 44(6), 726–736.
Kung, T. C. (2003). “Surface settlement induced by excavation with consideration of small strain behavior of Taipei silty clay.” Ph.D. dissertation, National Taiwan Univ. of Science and Technology, Taipei City, Taiwan.
Lin, H. D., Dang, P. H., and Hsieh, Y. M. (2015). “RIFT: Robust and interpolation-free technique for objective functions in geotechnical inverse analysis.” Comput. Geotech., 64, 96–104.
Ng, C., Bolton, M., and Dasari, G. (1995). “The small strain stiffness of a carbonate stiff clay.” Soils Found., 35(4), 109–114.
Ou, C. Y. (2006). Deep excavation: Theory and practice, Taylor and Francis, Lisse, Netherlands.
Ou, C. Y., Hsieh, P. G., and Chiou, D. C. (1993). “Characteristics of ground surface settlement during excavation.” Can. Geotech., 30(5), 758–767.
Ou, C. Y., Liao, J. T., and Lin, H. D. (1998). “Performance of diaphragm wall constructed using top-down method.” J. Geotech. Geoenviron. Eng., 798–808.
Pastor, M., Zienkiewicz, O., and Chan, A. (1990). “Generalized plasticity and the modelling of soil behaviour.” Int. J. Numer. Anal. Methods Geomech., 14(3), 151–190.
Roscoe, K. H., and Burland, J. B. (1968). “On the generalized stress-strain behaviour of wet clay.” Engineering plasticity, Cambridge Univ. Press, Cambridge, U.K., 553–609.
Santagata, M., Germaine, J. T., and Ladd, C. C. (2007). “Small-strain nonlinearity of normally consolidated clay.” J. Geotech. Geoenviron. Eng., 72–82.
Wang, L., Juang, C. H., Atamturktur, S., Gong, W., Khoshnevisan, S., and Hsieh, H. S. (2014). “Optimization of design of supported excavations in multi-layer strata.” J. Geoeng., 9(1), 1–12.
Wheeler, S. J., Näätänen, A., Karstunen, M., and Lojander, M. (2003). “An anisotropic elastoplastic model for soft clays.” Can. Geotech., 40(2), 403–418.
Whittle, A. J., and Hashash, Y. (1994). “Soil modelling and prediction of deep excavation behavior.” Proc., Pre-failure Deformation of Geomaterials, Balkema, Rotterdam, Netherlands, 589–594.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 15, 2015
Accepted: Jun 7, 2016
Published online: Aug 16, 2016
Discussion open until: Jan 16, 2017
Published in print: Mar 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.