DEM Analysis of Geomechanical Properties of Cemented Methane Hydrate–Bearing Soils at Different Temperatures and Pressures
Publication: International Journal of Geomechanics
Volume 16, Issue 3
Abstract
Mechanical properties of methane hydrate–bearing soils are influenced by the surrounding temperature and pore pressure. Studies of such influences are of great significance for the safe exploration of methane hydrate. First, a thermo-hydro-mechanical bond contact model is introduced to elucidate the microscopic contact scale behavior of grains with methane hydrate bonds. Second, such a model is incorporated into the distinct-element method (DEM), and a dimensionless temperature-pressure distance parameter is introduced. The influences of temperature and pore pressure along heating and depressurization paths are analyzed by conducting DEM biaxial compression tests, which are also compared with the results of laboratory triaxial compression tests conducted by others. The variation rules of the macromechanical properties (i.e., strength, elastic modulus, peak friction angle, cohesion, and dilatancy angle) with changing temperatures and pore pressures are then analyzed for different effective confining pressures and methane hydrate saturations in the DEM biaxial compression tests, which helps to provide an initial reference for practical applications. Finally, the microscopic mechanisms that affect the macromechanical characteristics are investigated via the ratio of intact bonds under different loading conditions. The results demonstrate that the DEM biaxial compression tests incorporating the bond contact model can efficiently capture the influences of temperature and pore pressure on the macromechanical properties of methane hydrate–bearing soils. It is shown here that temperature and pore pressure affect the mechanical properties of interparticle methane hydrate and, in turn, influence the macroscopic mechanical behavior of methane hydrate–bearing soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research was funded by the National Natural Science Foundation of China with Grant Number 51379180, Project of State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University of China with Grant Number SLDRCE14-A-04, and the China National Funds for Distinguished Youth Scientists with Grant Number 51025932. All these supports are greatly appreciated. In addition, the authors thank the reviewers and Dr. Colin Thornton at the University of Birmingham, United Kingdom, for their valuable comments, which have improved the quality of this paper.
References
Brugada, J., Cheng, Y. P., Soga, K., and Santamarina, J. C. (2010). “Discrete element modeling of geomechanical behaviour of methane hydrate soils with pore-filling hydrate distribution.” Granular Matter, 12(5), 517–525.
Committee on Assessment of the Department of Energy's Methane Hydrate Research and Development Program. (2010). “Evaluating methane hydrate as a future energy resource: Realizing the energy potential of methane hydrate for the United States.” National Academies Press, Washington, DC.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Demirbas, A. (2010). “Methane hydrates as potential energy resource: Part 2—Methane production process from gas hydrates.” Energy Convers. Manage., 51(7), 1562–1571.
Francisca, F., Yun, T. S., Ruppel, C., and Santamarina, J. C. (2005). “Geophysical and geotechnical properties of near-seafloor sediments in the northern Gulf of Mexico gas hydrate province.” Earth Planet Sci. Lett., 237(3–4), 924–939.
Handa, Y. P., and Stupin, D. Y. (1992). “Thermodynamic properties and dissociation characteristics of methane and propane hydrates in 70-. ANG.-radius silica gel pores.” J. Phys. Chem., 96(21), 8599–8603.
Hato, M., Matsuoka, T., Ikeda, H., Inamorit, T., Saeki, T., and Suzuki, K. (2008). “Geomechanical property of gas hydrate sediment in the Nankai Trough.” Proc., 6th Int. Conf. on Gas Hydrates, SciTech Connect, Oak Ridge, TN.
Hyodo, M., Hyde, A. F. L., Nakata, Y., Yoshimoto, N., Fukunaga, M., Kubo, K., Nanjo, Y., Matsuo, T., and Nakamura, K. (2002). “Triaxial compressive strength of methane hydrate”. Proc., 12th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Mountain View, CA, 422–428.
Hyodo, M., Nakata, Y., Norimasa, Y., and Toshiro, E. (2005). “Basic research on the mechanical behavior of methane hydrate-sediments mixture.” Soils Found., 45(1), 75–85.
Hyodo, M., Nakata, Y., Yoshimoto, N., and Yoneda, J. (2007). “Mechanical behavior of methane hydrate-supported sand.” Int. Symp. on Geotechnical Engineering Ground Improvement and Geosynthetics for Human Security and Environmental Preservation, Asian Center for Soil Improvement and Geosynthetics, Pathumthani, Thailand, 195–208.
Hyodo, M., Yoneda, J., Yoshimoto, N., and Nakata, Y. (2013). “Mechanical and dissociation properties of methane hydrate-bearing sand in deep seabed.” Soils Found., 53(2), 299–314.
Jiang, M. J., Konrad, J. M., and Leroueil, S. (2003). “An efficient technique for generating homogeneous specimens for DEM studies.” Comput. Geotech., 30(7), 579–597.
Jiang, M. J., Sun, Y. G., Li, L. Q., and Zhu, H. H. (2012). “Contact behavior of idealized granules bonded in two different interparticle distances: An experimental investigation.” Mech. Mater., 55, 1–15.
Jiang, M. J., Liu, F., Zhu, F. Y., and Xiao, Y. (2013a). “A simplified contact model for sand grains cemented with methane hydrate”. Proc., 18th Int. Conf. on Soil Mechanics and Geotechnical Engineering, French Society for Soil Mechanics and Geotechnical Engineering, Paris, 1015–1018.
Jiang, M. J., Sun, Y. G., and Yang, Q. J. (2013b). “A simple distinct element modeling of the mechanical behavior of methane hydrate-bearing sediments in deep seabed.” Granular Matter, 15(2), 209–220.
Jiang, M. J., Zhou, Y. P., and Chen, H. (2013c). “Experimental analyses of effect of different bond thickness on mechanical properties of bonded granules.” Rock Soil Mech., 34(5), 1264–1273 (in Chinese).
Jiang, M. J., Zhu, F. Y., Xiao, Y., Liu, F., and Utili, S. (2014). “A bond contact model for methane hydrate-bearing sediments with interparticle cementation.” Int. J. Numer. Methods Eng., 38(17), 1823–1854.
Kataoka, S., Yamashita, S., Suzuki, T., Kawaguchi, T., Hamza, M., Shahien, M., and Ei-Mossallamy, Y. (2009). “Soils properties of the shallow type methane hydrate-bearing sediments in the Lake Baikal.” Proc., 17th Int. Conf. on Soil Mechanics and Geotechnical Engineering, IOS Press, Amsterdam, the Netherlands, 299–302.
Masui, A., Haneda, H., Ogata, Y., and Aoki, K. (2005). “Effects of methane hydrate formation on shear strength of synthetic methane hydrate sediments.” Proc., 15th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Mountain View, CA, 19–24.
MATLAB [Computer software]. MathWorks, Natick, MA.
Miyazaki, K., Masui, A., Sakamoto, Y., Aoki, K., Tenma, N., and Yamaguchi, T. (2011). “Triaxial compressive properties of artificial methane-hydrate-bearing sediment.” J. Geophys. Res. B Solid Earth, 116(B6), B06102
Nabeshima, Y., and Matsui, T. (2003). “Static shear behaviors of methane hydrate and ice.” Proc., Fifth Ocean Mining Symp., International Society of Offshore and Polar Engineers, Mountain View, CA, 156–159.
Nabeshima, Y., Takai, Y., and Komai, T. (2005). “Compressive strength and density of methane hydrate”. Proc., 6th ISOPE Ocean Mining Symp., International Society of Offshore and Polar Engineers, Mountain View, CA, 199– 202.
Nixon, M. F., and Grozic, J. L. H. (2007). “Submarine slope failure due to gas hydrate dissociation: A preliminary quantification.” Can. Geotech. J., 44(3), 314–325.
PFC2D 3.0. [Computer software]. Itasca Consulting Group, Inc., Minneapolis.
Ripmeester, J. A., John, S. T., Ratcliffe, C. I., and Powell, B. M. (1987). “A new clathrate hydrate structure.” Nature, 325, 135–136.
Ripmeester, J., and Ratcliffe, C. (1988). “Low-temperature cross-polarization/magic angle spinning carbon-13 NMR of solid methane hydrates: Structure, cage occupancy, and hydration number.” J. Phys. Chem., 92(2), 337–339.
Roscoe, K. (1970). “The influence of strains in soil mechanics.” Géotechnique, 20(2), 129–170.
Ruppel, C., Boswell, R., and Jones, E. (2008). “Scientific results from Gulf of Mexico Gas Hydrates Joint Industry Project Leg 1 drilling: Introduction and overview.” Mar. Petrol. Geol., 25(9), 819–829.
Santamarina, J. C., and Ruppel, C. (2008). “The impact of hydrate saturation on the mechanical, electrical, and thermal properties of hydrate-bearing sand, silts, and clay.” Proc., 6th Int. Conf. on Gas Hydrate, SciTech Connect, Oak Ridge, TN, 6–10.
Sloan, Jr., E. D., and Koh, C. (2007). Clathrate hydrates of natural gases, CRC Press, Boca Raton, FL.
Soga, K., Lee, S. L., Ng, M. Y. A., and Klar, A. (2006). “Characterisation and engineering properties of methane hydrate soils.” Characterisation and engineering properties of natural soils, Vol. 4, Taylor and Francis, London, 2591–1642.
Song, Y. C., Yu, F., Li, Y. H., Liu, E. G., and Zhao, J. F. (2010). “Mechanical property of artificial methane hydrate under triaxial compression.” J. Nat. Gas. Chem., 19(3), 246–250.
Sultan, N., Cochonat, P., Foucher, J. P., and Mienert, J. (2004). “Effect of gas hydrates melting on seafloor slope instability.” Mar. Geol., 213(1–4), 379–401.
Uchida, S., Soga, K., and Yamamoto, K. (2012). “Critical state soil constitutive model for methane hydrate soil.” J. Geophys. Res., 117(B3), B03209
Waite, W. F., et al. (2009). “Physical properties of hydrate-bearing sediments.” Rev. Geophys., 47(4), RG4003
Wang, J., Dove, J. E., and Gutierrez, M. S. (2007). “Anisotropy-based failure criterion for an interphase system.” J. Geotech. Geoenviron, 133(5), 599–608.
Wang, J., and Jiang, M. J. (2011). “Unified soil behavior of interface shear test and direct shear test under the influence of lower moving boundaries.” Granular Matter, 13(5), 631–641.
Yu, F., Song, Y. C., Liu, W. G., Li, Y. H., and Zhao, J. F. (2010). “Study on shear strength of artificial methane hydrate.” Proc., ASME 2010 29th Int. Conf. on Ocean, Offshore and Arctic Engineering OMAE, Shanghai, China, 1–6.
Zhou, B., Huang, R. Q., Wang, H. B., and Wang, J. (2013). “DEM investigation of particle anti-rotation effects on the micro-mechanical response of granular materials.” Granular Matter, 15(3), 315–326.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 8, 2014
Accepted: Sep 4, 2015
Published online: Dec 16, 2015
Discussion open until: May 16, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.