Bounding Surface Constitutive Model for Cemented Sand under Monotonic Loading
Publication: International Journal of Geomechanics
Volume 16, Issue 2
Abstract
This paper presents a critical state constitutive model for cemented sand. The model uses a single capped yield surface as a function of the void ratio, confining pressure, preconsolidation pressure, and stress ratio at the peak of the undrained effective stress path. To model the cemented materials, the formulation of the yield function, elastic moduli, plastic modulus, flow rule, and other components of the model have been modified. Having incorporated the tensile strength and cohesion, the radial-mapping formulation of the bounding surface plasticity is incorporated in the model. The modified model has been calibrated and verified based on experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the research funding for this study provided by the National Sciences Engineering Research Council of Canada through a Collaborative Research Development program supported by BP Canada.
References
Al-Tabbaa, A. (1987). “Permeability and stress-strain response of speswhite kaolin.” Ph.D. thesis, Univ. of Cambridge, Cambridge, U.K.
Asghari, E., Toll, D. G., and Haeri, S. M. (2003). “Triaxial behaviour of a cemented gravely sand, Tehran alluvium.” Geotech. Geol. Eng., 21(1), 1–28.
Bardet, J. P. (1986). “Bounding surface plasticity model for sands.” J. Eng. Mech., 1198–1217.
Been, K., and Jefferies, M. G. (1985). “A state parameter for sands.” Géotechnique, 35(2), 99–112.
Chen, W. F. (1994). Constitutive equations for engineering materials, Vol. 2: Plasticity and modeling, Elsevier, New York.
Chen, W. F., and Han D. J. (2007). Plasticity for structural engineers, John Ross Publishing, Ft. Lauderdale, FL.
Clough, G. W., Shafii Rad, N., Bachus, R. C., and Sitar, N. (1981). “Cemented sands under static loading.” J. Geotech. Engrg. Div., 107(6), 799–817.
Dafalias, Y. F. (1986). “Bounding surface plasticity. I: Mathematical foundation and hypoplasticity.” J. Eng. Mech., 966–987.
Dafalias, Y. F., and Herrmann, L. R. (1986). “Bounding surface plasticity. II: Application to isotropic cohesive soils.” J. Eng. Mech., 1263–1291.
Dafalias, Y. F., and Popov, E. P. (1975). “A model of nonlinearly hardening materials for complex loading.” Acta Mech., 21(3), 173–192.
Desai, C. S., (2000). “Evaluation of liquefaction using disturbed state and energy approaches.” J. Geotech. Geoenviron. Eng., 618–631.
Desai, C. S. (2007). “Unified DSC constitutive model for pavement materials with numerical implementation.” Int. J. Geomech., 83–101.
Desai, C. S., and Wang, S. C. (2003). “Disturbed state model for porous saturated materials.” Int. J. Geomech., 260–265.
Fernandez, A. L., and Santamarina, J. C. (2000). “Effect of cementation on the small-strain parameters of sands.” Can. Geotech. J., 38(1), 191–199.
Gao, Z., and Zhao, J. (2012). “Constitutive modeling of artificially cemented sand by considering fabric anisotropy.” Comput. Geotech., 41, 57–69.
Gens, A., and Nova, R. (1993). “Conceptual bases for a constitutive model for bonded soils and weak rocks.” Proc., Symp. on Geotechnical Engineering of Hard Soils–Soft Rocks, Athens, Greece, Anagnostopoulos et al., 485–494.
Hau, K. W. (2003). “Application of a three surface kinematic hardening model to the repeated loading and thinly surfaced pavements.” Ph.D. thesis, Univ. of Nottingham, Nottingham, U.K.
Imam, M. R. (1999). “Modeling the constitutive behavior of sand for the analysis of static liquefaction.” Ph.D. thesis, Univ. of Alberta, Edmonton, AB, Canada.
Imam, M. R., and Chan, D. (2008). “Application of a critical state model for the cyclic loading of sands.” Proc., 61th Canadian Geotechnical Conf., Edmonton, Canada, 127–134.
Imam, S. M. R., Morgenstern, N. R., Robertson, P. K., and Chan, D. H. (2005). “A critical-state constitutive model for liquefiable sand.” Can. Geotech. J., 42(3), 830–855.
Jefferies, M. G. (1993). “Nor-sand: A simple critical state model for sand.” Géotechnique, 43(1), 91–103.
Lee, K. H., Chan, D. H., and Lam, K. C. (2004). “Constitutive model for cement treated clay in a critical state framework.” Soils Found., 44(3), 69–77.
Liu, M. D., Carter, J. P., Desai, C. S., and Xu, K. J. (2000). “Analysis of the compression of structured soils using the disturbed state concept.” Int. J. Numer. Anal. Methods Geomech., 24(8), 723–735.
Manzari, M. T., and Dafalias, Y. F. (1997). “A critical state two-surface plasticity model for sands.” Géotechnique, 47(2), 255–272.
Marri, A. (2010). “The mechanical behaviour of cemented granular materials at high pressures.” Ph.D. thesis, Univ. of Nottingham, Nottingham, U.K.
McDowell, G. R., and Hau, K. W. (2004). “A generalised modified cam clay model for clay and sand incorporating kinematic hardening and bounding surface plasticity.” Granular Matter, 6(1), 11–16.
Navarro, V., Alonso, J., Calvo, B., and Sanchez, J. (2010). “A constitutive model for porous rock including effects of bond strength degradation and partial saturation.” Int. J. Rock Mech. Min. Sci., 47(8), 1330–1338.
Nova, R. (2005). “A simple elastoplastic model for soils and soft rocks.” Proc., Soil Constitutive Models: Evaluation, Selection, and Calibration., ASCE, Reston, VA, 380–399.
Nova, R. (2006). “Modelling of bonded soils with unstable structure.” Springer proceedings in physics: Modern trends in geomechanics, Vol. 106, Springer, 129–142.
Nova, R., Castellanza, R., and Tamagnini, C. (2003). “A constitutive model for bonded geomaterials subject to mechanical and/or chemical degradation.” Int. J. Numer. Anal. Methods Geomech., 27(9), 705–732.
Reilly, M. P. O., and Brown, S. F. (1991). Cyclic loading of soils: From theory to design, Blackie and Son Ltd., Glasgow, Scotland, U.K.
Schofield, A. N. (1993). “Original Cam-Clay.” Int. Conf. on Soft Soil Engineering, Science Press, Guangzhou, China, 40–49.
Suebsuk, J., Horpibulsuk, S., and Liu, M. D. (2010). “Modified structured Cam Clay: A generalised critical state model for destructured, naturally structured and artificially structured clays.” Comput. Geotech., 37(7), 956–968.
Suebsuk, J., Horpibulsuk, S., and Liu, M. D. (2011). “A critical state model for overconsolidated structured clays.” Comput. Geotech., 38(5), 648–658.
Vatsala, A., Nova, R., and Murthy, B. R. S. (2001). “Elastoplastic model for cemented soils.” J. Geotech. Geoenviron. Eng., 679–687.
Vermeer, P. A., and de Borst, R. (1984). “Non-associated plasticity for soils, concrete and rocks.” Heron, 29(3), 1–64.
Wang, Y. H., and Leung, S. C. (2008). “Characterization of cemented sand by experimental and numerical investigations.” J. Geotech. Geoenviron. Eng., 992–1004.
Wood, D. M. (1990). Soil behavior and critical state soil mechanics, Cambridge University Press, New York.
Yang, C., Huang, M. S., and Cui, Y. J. (2011). Constitutive model of unsaturated structured soils under cyclic loading, Taylor and Francis Group, London, 987–992.
Yu, H. S. (2006). Plasticity and geotechnics, Springer, New York.
Yu, H. S., Tan, S. M., and Schnaid, F. (2007). “A critical state framework for modeling bonded geomaterials.” Geomech. Geoeng., 2(1), 61–74.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Apr 13, 2014
Accepted: Apr 7, 2015
Published online: Jun 30, 2015
Discussion open until: Nov 30, 2015
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.