Observed Effects of Interparticle Friction and Particle Size on Shear Behavior of Granular Materials
Publication: International Journal of Geomechanics
Volume 16, Issue 1
Abstract
This paper presents an experimental study on the shear behavior of granular materials, focusing on the effects of interparticle friction and particle size, which are of fundamental importance but are not yet well understood. The experimental program consisted of a large number of direct shear tests on glass beads of varying sizes and interparticle friction conditions, performed under a range of packing densities and normal stress levels. Test data were interpreted in terms of the stress–dilatancy relationship and shear strength parameters. The study indicates that under otherwise similar testing conditions, oil-lubricated glass beads tend to have substantially lower shear strength as compared with water-lubricated, water-flooded, and dry glass beads. It has also been found that at similar particle size uniformity, increasing mean particle size () leads to more dilatant shear response and higher shear strength. A generalized stress–dilatancy relation is proposed, which introduces a variable dilatancy coefficient that reflects on the effects of interparticle friction and particle size. It is shown that classical stress–dilatancy relations can be regarded as special cases of this generalized case, with the dilatancy coefficient being taken as a constant. Further explanations for the observed effects on macroscopic behavior are provided from the micromechanics perspectives.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the University of Hong Kong under the Seed Funding for Basic Research Scheme. The authors also want to thank the financial support provided by the National Natural Science Foundation of China under Grant Nos. 51209237, 51428901, and 41030747.
References
Al-Hussaini, M. (1983). “Effect of particle size and strain conditions on the shear strength of crushed basalt.” Can. Geotech. J., 20(4), 706–717.
Bishop, A. W. (1954). “Correspondence on shear characteristics of a saturated silt, measured in triaxial compression.” Géotechnique, 4(1), 43–45.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Géotechnique, 36(1), 65–78.
Caquot, A. (1934). Equilibre des massifs à frottement interne, Gauthier-Villars, Paris (in French).
Cavarretta, I., Coop, M., and O’Sullivan, C. (2010). “The influence of particle characteristics on the behaviour of coarse grained soils.” Géotechnique, 60(6), 413–423.
Dai, B. B. (2010). “Micromechanical investigation of the behavior of granular materials.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Hong Kong, Hong Kong.
Gabrieli, F., Lambert, P., Cola, S., and Calvetti, F. (2012). “Micromechanical modelling of erosion due to evaporation in a partially wet granular slope.” Int. J. Numer. Anal. Meth. Geomech., 36(7), 918–943.
Hamidi, A., Azini, B., and Masoudi, C. (2012). “Impact of gradation on the shear strength-dilation behavior of well graded sand-gravel mixtures.” Sci. Iran. A, 19(3), 393–402.
Horne, M. R. (1969). “The behaviour of an assembly of rotund, rigid, cohesionless particles. Ш.” Proc. R. Soc. London Ser. A, 310(1500), 21–34.
Jaafar, R., and Likos, W. J. (2011). “Estimating water retention characteristics of sands from grain size distribution using idealized packing conditions.” Geotech. Test. J., 34(5), 1–14.
Jewell, R. A., and Wroth, C. P. (1987). “Direct shear tests on reinforced sand.” Géotechnique, 37(1), 53–68.
Kruyt, N. P., and Rothenburg, L. (2006). “Shear strength, dilatancy, energy and dissipation in quasi-static deformation of granular materials.” J. Stat. Mech.: Theory Exp. 7(paper no. P070210), 1–13.
Li, X., and Yu, H. (2013). “Particle-scale insight into deformation noncoaxiality of granular materials.” Int. J. Geomech., 04014061.
Maeda, K., Hirabayashi, H., and Ohmura, A. (2006). “Micromechanical influence of grain properties on deformation-failure behavior of granular media by DEM.” Geomechanics and Geotechnics of Particulate Media, M. Hyodo, H. Murata, and Y. Nakata, eds., Taylor & Francis, U.K., 173–180.
Mahmud Sazzad, M., Suzuki, K., and Modaressi-Farahmand-Razavi, A. (2012). “Macro-micro responses of granular materials under different values using DEM.” Int. J. Geomech., 12(3), 220–228.
Marachi, N. D., Chan, C. K., and Seed, H. B. (1972). “Evaluation of properties of rockfill materials.” J. Soil Mech., 98(SM1), 95–112.
Ogbonnaya, I., Kyoji, S., and Hiroshi, S. (2009). “The geotechnical properties of sands with varying grading in a stress-controlled ring shear tests.” Electron. J. Geotech. Eng., 14(Bundle N), 1–21.
Oger, L., Savage, S. B., Corriveau, D., and Sayed, M. (1998). “Yield and deformation of an assembly of disks subjected to a deviatoric stress loading.” Mech. Mater., 27(4), 189–210.
O’Sullivan, C., Bray, J. D., and Riemer, M. F. (2002). “Influence of particle shape and surface friction variability on response of rod-shaped particulate media.” J. Eng. Mech., 1182–1192.
Oztoprak, S., and Bolton, M. D. (2013). “Stiffness of sands through a laboratory test database.” Géotechnique, 63(1), 54–70.
Rowe, P. W. (1971). “Theoretical meaning and observed values of deformation parameters for soil.” Proc., Roscoe Memorial Symp., Foulis & Co., Cambridge, 143–194.
Shibuya, S., Mitachi, T., and Tamate, S. (1997). “Interpretation of direct shear box testing of sands as quasi-simple shear.” Géotechnique, 47(4), 769–790.
Skinner, A. E. (1969). “A note on the influence of interparticle friction on the shear strength of a random assembly of spherical particles.” Géotechnique, 19(1), 150–157.
Soria-Hoyo, C., Valverde, J. M., and Castellanos, A. (2009). “Avalanches in moistened beds of glass beads.” Powder Technol., 196(3), 257–262.
Suiker, A. S. J., and Fleck, N. A. (2004). “Frictional collapse of granular media.” J. Appl. Mech., 71(3), 350–358.
Taylor, D. W. (1948). Fundamentals of soil mechanics, John Wiley, New York.
Thornton, C. (2000). “Numerical simulations of deviatoric shear deformation of granular media.” Géotechnique, 47(2), 319–329.
Tribology. (2013). “ROYMECH” 〈http://www.roymech.co.uk/Useful_Tables/Tribology/co_of_frict.htm〉 (Jan. 17, 2013).
Wood, D. M. (1990). Soil behaviour and critical state soil mechanics, Cambridge University Press, Cambridge, U.K.
Yang, J., and Wei, L. M. (2012). “Collapse of loose sand with the addition of fines: The role of particle shape.” Géotechnique, 62(12), 1111–1125.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Aug 28, 2014
Accepted: Mar 12, 2015
Published online: Apr 25, 2015
Discussion open until: Sep 25, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.