Dilatancy and Strength of an Unsaturated Soil-Cement Interface in Direct Shear Tests
Publication: International Journal of Geomechanics
Volume 15, Issue 5
Abstract
The dilatancy of a soil is significantly influenced by matric suction, and it affects the apparent friction angle and shear strength of the soil. To examine the influence of dilatancy on interface behavior, a series of direct shear box tests are conducted on a compacted completely decomposed granite (CDG) soil–grout interface in a cast in situ condition under different matric suctions and net normal stresses. The test results indicate that matric suction and net normal stress have significant influence on the hardening-softening and dilatancy of the soil–cement grout interface. The failure envelopes for different matric suctions are observed as linear. The apparent interface friction angle and adhesion intercept increase with matric suction. The suction envelope is found to be nonlinear as the -angle decreases with matric suction. A modified model is proposed to consider the influence of dilatancy on the apparent interface friction angle and hence on the interface shear strength. Experimental shear strength data are compared with the analytical shear strength results obtained from the modified model using effective interface strength parameters and analytical values of dilation angles obtained from dilatancy curves. The experimental shear strength data agrees well with the analytical results for different net normal stresses and matric suctions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the Hong Kong Polytechnic University and a grant from the Research Grants Council (RGC) General Research Fund (GRF) (Grant No. PolyU 5338/08E) of the Hong Kong Special Administrative Region Government of China are gratefully acknowledged.
References
ASTM. (1992). “Standard test method for classification of soils for engineering purposes.” D2487-90, West Conshohocken, PA.
British Standards Institution (BSI). (1990). “Methods of test for soils for civil engineering purposes.” BS 1377, London.
Burland, J. B., and Ridley, A. K. (1996). “The importance of suction in soil mechanics.” Proc., 12th Geotechnical Southeast Asian Conf., Kluwer Academic Publishers, Dordrecht, Netherlands, 27–49.
Chen, P. Y. M. (1992). “Methods of test for soils in Hong Kong for civil engineering purposes (phase 1 tests).” GEO Rep. No. 36, Geotechnical Engineering Office, Hong Kong.
Chu, L. M., and Yin, J. H. (2006). “Study on soil-cement grout interface shear strength of soil nailing by direct shear box testing method.” Geomech. Geoeng., 1(4), 259–273.
Desai, C. S., Drumm, E. C., and Zaman, M. M. (1985). “Cyclic testing and modeling of interfaces.” J. Geotech. Engrg., 793–815.
Fredlund, D. G., Morgenstern, N. R., and Widger, R. A. (1978). “The shear strength of unsaturated soils.” Can. Geotech. J., 15(3), 313–321.
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, Wiley, New York.
Gan, J. K. M., and Fredlund, D. G. (1988). “Multistage direct shear testing of unsaturated soils.” Geotech. Test. J., 11(2), 132–138.
Hamid, T. B., and Miller, G. A. (2009). “Shear strength of unsaturated soil interfaces.” Can. Geotech. J., 46(5), 595–606.
Hossain, M. A., and Yin, J.-H. (2010a). “Behavior of a compacted completely decomposed granite soil from suction controlled direct shear tests.” J. Geotech. Geoenviron. Eng., 189–198.
Hossain, M. A., and Yin, J.-H. (2010b). “Shear strength and dilative characteristics of an unsaturated compacted completely decomposed granite soil.” Can. Geotech. J., 47(10), 1112–1126.
Hossain, M. A., and Yin, J.-H. (2012). “Influence of grouting pressure on the behavior of an unsaturated soil-cement interface.” J. Geotech. Geoenviron. Eng., 193–202.
Hossain, M. A., and Yin, J.-H. (2014). “Behavior of a pressure-grouted soil-cement interface in direct shear tests.” Int. J. Geomech., 101–109.
Kulhawy, F. H., and Peterson, M. S. (1979). “Behavior of sand-concrete interfaces.” Proc., 6th Pan-American Conf. on Soil Mechanics and Foundation Engineering, Vol. 7, Lima, Peru, 225–236.
Miller, G. A., and Hamid, T. B. (2007). “Interface direct shear testing of unsaturated soil.” Geotech. Test. J., 30(3), 182–191.
Potyondy, J. G. (1961). “Skin friction between various soils and construction materials.” Géotechnique, 11(4), 339–353.
Samadhiya, N. K., Viladkar, M. N., and Al-Obaydi, M. A. (2008). “Three-dimensional joint/interface element for rough undulating major discontinuities in rock masses.” Int. J. Geomech., 327–335.
Sharma, J. S., Fleming, I. R., and Jogi, M. B. (2007). “Measurement of unsaturated soil-geomembrane interface shear-strength parameters.” Can. Geotech. J., 44(1), 78–88.
Subba Rao, K. S., Allam, M. M., and Robinson, R. G. (2000). “Drained shear strength of fine-grained soil-solid surface interfaces.” Proc. Inst. Civ. Eng. Geotech. Eng., 143(2), 75–81.
Vanapalli, S. K., Fredlund, D. G., Pufahl, D. E., and Clifton, A. W. (1996). “Model for the prediction of shear strength with respect to soil suction.” Can. Geotech. J., 33(3), 379–392.
Yin, J.-H., Hong, C.-Y., and Zhou, W.-H. (2012). “Simplified analytical method for calculating the maximum shear stress of nail-soil interface.” Int. J. Geomech., 309–317.
Zhou, W.-H., Yuen, K.-V., and Tan, F. (2013). “Estimation of maximum pullout shear stress of grouted soil nails using Bayesian probabilistic approach.” Int. J. Geomech., 659–664.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 7, 2013
Accepted: Jun 2, 2014
Published online: Jul 1, 2014
Published in print: Oct 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.