Vertical Stress Determination within Backfilled Mine Stopes
Publication: International Journal of Geomechanics
Volume 14, Issue 5
Abstract
Determining the vertical stresses within underground mine stopes is necessary for designing the barricades that block the drives during filling. This paper discusses two different procedures that can be used for determining the vertical stress profile, which give different values of stresses. The difference is attributed to fixing the bottom of the stope, implying zero displacement in any direction. The reasons are discussed, and it is suggested that the method commonly used in numerical modeling (Method 2) is not necessarily the better of the two. The alternate method (Method 1) models the field situation better when the loadings at the bottom during filling are required, mimics the laboratory model tests, and gives the same stress profile for all stopes with any aspect ratio. The findings are applicable to backfilled trenches as well.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aubertin, M., et al. (2003). “Interaction between backfill and rock mass in narrow stopes.” Proc., 12th Pan American Conf. on Soil Mechanics and Geotechnical Engineering, Verlag Glückauf, Essen, Germany, 1157–1164.
Belem, T., Harvey, A., Simon, R., and Aubertin, M. (2004). “Measurement and prediction of internal stresses in an underground opening during its filling with cemented fill.” Proc., Ground Support in Mining and Underground Construction, Taylor & Francis, London, 28–30.
Fahey, M., Helinski, M., and Fourie, A. (2009). “Some aspects of the mechanics of arching in backfilled stopes.” Can. Geotech. J., 46(11), 1322–1336.
Handy, R. L. (1985). “The arch in soil arching.” J. Geotech. Engrg., 302–318.
Itasca Consulting Group. (2008). FLAC: Fast Lagrangian Analysis of Continua, user manual (version 6.0), Minneapolis.
Itasca Consulting Group. (2009). FLAC3D: Fast Lagrangian Analysis of Continua in 3 dimensions, user manual (version 6.0), Minneapolis.
Janssen, H. (1895). “Versuche uber Getreidedruck in Silozellen.” Z. Ver. Dtsch. Ing., 39(35), 1045–1049 (in German).
Knutsson, S. (1981). “Stresses in the hydraulic backfill from analytical calculations and in-situ measurements.” Proc., Application of Rock Mechanics to Cut and Fill Mining, Institution of Mining and Metallurgy, London, 261–268.
Kuganathan, K. (2005). “Geomechanics of minefill.” Chapter 3, Handbook on minefill, Y. Potvin, E. Thomas, and A. Fourie, eds., Australian Centre for Geomechanics, Nedlands, WA, Australia, 23–47.
Li, L. (2013). “A generalized solution for mining backfill design.” Int. J. Geomech., 04014006.
Li, L., and Aubertin, M. (2008). “An improved analytical solution to estimate the stress state in subvertical backfilled stopes.” Can. Geotech. J., 45(10), 1487–1496.
Li, L., and Aubertin, M. (2009). “Numerical investigation of the stress state in inclined backfilled stopes.” Int. J. Geomech., 52–62.
Li, L., Aubertin, M., and Belem, T. (2005). “Formulation of a three dimensional analytical solution to evaluate stresses in backfilled vertical narrow openings.” Can. Geotech. J., 42(6), 1705–1717.
Li, L., Aubertin, M., and Shirazi, A. (2010). “Implementation and application of a new elastoplastic model based on a multiaxial criterion to assess the stress state near underground openings.” Int. J. Geomech., 13–21.
Li, L., Aubertin, M., Simon, R., Bussière, B., and Belem, T. (2003). “Modeling arching effects in narrow backfilled stopes with FLAC.” Proc., 3rd Int. Symp. on FLAC and FLAC3D Numerical Modeling in Geomechanics, Itasca Consulting Canada, Sudbury, ON, Canada, 211–219.
Marston, A. (1930). “The theory of external loads on closed conduits in the light of the latest experiments.” Iowa Engineering Experiment Station Bulletin 96, Iowa Engineering Experiment Station, Ames, IA, 138–170.
Mitchell, R., Olsen, R., and Smith, J. (1982). “Model studies on cemented tailings used in mine backfill.” Can. Geotech. J., 19(1), 14–28.
Mitchell, R., and Roettger, J. (1984). “Bulkhead pressure measurements in model fill pours.” CIM Bull., 77(888), 50–55.
Pirapakaran, K., and Sivakugan, N. (2007a). “A laboratory model to study arching within a hydraulic fill stope.” Geotech. Test. J., 30(6), 496–503.
Pirapakaran, K., and Sivakugan, N. (2007b). “Arching within hydraulic fill stopes.” Geotech. Geol. Eng., 25(1), 25–35.
Shukla, S. K., and Sivakugan, N. (2013). “Load coefficient for ditch conduits covered with geosynthetic-reinforced granular backfill.” Int. J. Geomech., 76–82.
Singh, S., Shukla, S., and Sivakugan, N. (2011). “Arching in inclined and vertical mine stopes.” Geotech. Geol. Eng., 29(5), 685–693.
Singh, S., Sivakugan, N., and Shukla, S. K. (2010). “Can soil arching be insensitive to ?” Int. J. Geomech., 124–128.
Sivakugan, N., and Widisinghe, S. (2013). “Stresses within granular materials contained between vertical walls.” Indian Geotech. J., 43(1), 30–38.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Thompson, B. D., Bawden, W. F., and Grabinsky, M. W. (2012). “In situ measurements of cemented paste backfill at the Cayeli Mine.” Can. Geotech. J., 49(7), 755–772.
Thompson, B. D., Grabinsky, M. W., Bawden, W. F., and Counter, D. B. (2009). “In-situ measurements of cemented paste backfill in long-hole stopes.” Proc., RockEng09: 3rd CANUS Rock Mechanics Symp., Canadian Institute of Mining, Metallurgy and Petroleum, Toronto, 1–10.
Ting, C. H., Shukla, S. K., and Sivakugan, N. (2011). “Arching in soils applied to inclined mine stopes.” Int. J. Geomech., 29–35.
Ting, C. H., Sivakugan, N., and Shukla, S. K. (2012). “Laboratory simulation of the stresses within inclined stopes.” Geotech. Test. J., 35(2), 1–15.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 14, 2013
Accepted: Oct 14, 2013
Published online: Oct 16, 2013
Discussion open until: Aug 28, 2014
Published in print: Oct 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.