Technical Papers
Jun 18, 2013

Prediction of Multidimensional Deformation Behavior Based on Observed Values

Publication: International Journal of Geomechanics
Volume 14, Issue 3

Abstract

In this study, a method is developed for predicting the future deformation of soft ground, based on measured data. Because it is difficult to predict the deformation behavior of soft ground on the basis of laboratory consolidation test results only, in situ observations are generally made. An inverse analysis is effective for identifying the in situ parameters of the ground and for predicting future deformation based on those parameters. In the method proposed, the induced anisotropy (transverse isotropy) of the ground is introduced to solve the problem of predicting lateral displacement, and a simplified hyperbolic model is introduced to simulate nonlinear shear behavior. Furthermore, the change in volume compressibility of the material and the decrease in permeability caused by consolidation are considered simultaneously through the use of a statistical model for the soil parameters. This statistical model, which takes the nonlinearity of the parameters into account, is called the stochastic nonlinear model (SNM). To verify the usefulness of the proposed method, the results of two-dimensional deformation tests are analyzed.

Get full access to this article

View all available purchase options and get full access to this article.

Acknowledgments

This work was supported partly by Grants-in-Aid for Scientific Research, Japan Society for the Promotion of Science (23248040).

References

Arai, K., Ohta, H., and Kojima, K. (1984). “Estimation of soil parameters based on monitored movement of subsoil under consolidation.” Soils Found., 24(4), 95–108.
Arai, K., Ohta, H., and Kojima, K. (1987). “Estimation of nonlinear constitutive parameters based on monitored movement of subsoil under consolidation.” Soils Found., 27(1), 35–49.
Asaoka, A., and Matsuo, M. (1984). “An inverse approach to the prediction of multi-dimensional consolidation behavior.” Soils Found., 24(1), 49–62.
Asaoka, A., and Misumi, K. (1988). “Analysis and prediction of consolidation settlement of normally consolidated clay foundation.” Soils Found., 28(3), 35–50.
Asaoka, A., Nakano, M., and Noda, T. (2000). “Superloading yield surface concept for highly structured soil behavior.” Soils Found., 40(2), 99–110.
Duncan, J. M., and Chang, C.-Y. (1970). “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. and Found. Div., 96(5), 1629–1653.
Gioda, G., and Sakurai, S. (1987). “Back analysis procedure for the interpretation of field measurements in geomechanics.” Int. J. Numer. Anal. Methods Geomech., 11(6), 555–583.
Honjo, Y., Wen-Tsung, L., and Sakajo, S. (1994). “Application of Akaike information criterion statistics to geotechnical inverse analysis: The extended Bayesian method.” Struct. Saf., 14(1–2), 5–29.
Iizuka, A., and Ohta, H. (1987). “A determination procedure of input parameters in elasto-viscoplastic finite element analysis.” Soils Found., 27(3), 71–97.
Kim, H.-J., and Mission, J. L. (2011). “Numerical analysis of one-dimensional consolidation in layered clay using interface boundary relations in terms of infinitesimal strain.” Int. J. Geomech., 72–77.
Mirjalili, M., Kimoto, S., Oka, F., and Hattori, T. (2012). “Long-term consolidation analysis of a large-scale embankment construction on soft clay deposits using an elasto-viscoplastic model.” Soils Found., 52(1), 18–37.
Murakami, A., Shuku, T., Nishimura, S., Fujisawa, K., and Nakamura, K. (2013). “Data assimilation using the particle filter for identifying the elasto-plastic material properties of geomaterials.” Int. J. Numer. Anal. Methods Geomech., 37(11), 1642–1669.
Nishimura, S., Nishiyama, T., and Murakami, A. (2005). “Inverse analysis of soft grounds considering nonlinearity and anisotropy.” Soils Found., 45(2), 87–95.
Nishimura, S., Shimada, K., and Fujii, H. (2002). “Consolidation inverse analysis considering spatial variability and non-linearity of soil parameters.” Soils Found., 42(3), 45–61.
Nishimura, S., Shuku, T., Nishimura, Y., Fujisawa, K. and Murakami, A. (2012). “Prediction of residual settlement of soft grounds by using particle filter.” J. Appl. Mech., 15, I_103–I_114 (in Japanese).
Rani, S., Kumar, R., and Singh, S. J. (2011). “Consolidation of an anisotropic compressible poroelastic clay layer by axisymmetric surface loads.” Int. J. Geomech., 65–71.
Schofield, A. and Wroth, P. (1968). Critical state soil mechanics. McGraw Hill, London.
Sekiguchi, H., and Ohta, H. (1977). “Induced anisotropy and time dependency in clay.” Proc., 9th ICSMFE, Specialty Session No. 9, Constitutive Equations of Soils, Tokyo, 163–175.
Shuku, T., Murakami, A., Nishimura, S., Fujisawa, K., and Nakamura, K. (2012). “Parameter identification for Cam Clay model in partial loading model tests using the particle filter.” Soils Found., 52(2), 279–298.
Tashiro, M., Noda, T., Inagaki, M., Nakano, M., and Asaoka, A. (2011). “Prediction of settlement in natural deposited clay ground with risk of large residual settlement due to embankment loading.” Soils Found., 51(1), 133–149.

Information & Authors

Information

Published In

Go to International Journal of Geomechanics
International Journal of Geomechanics
Volume 14Issue 3June 2014

History

Received: Aug 30, 2012
Accepted: Jun 14, 2013
Published online: Jun 18, 2013
Published in print: Jun 1, 2014
Discussion open until: Aug 26, 2014

Permissions

Request permissions for this article.

Authors

Affiliations

Shin-Ichi Nishimura [email protected]
Professor, Graduate School of Environmental and Life Science, Okayama Univ., 3-1-1 Tsushima-naka, Kita-ku, Okayama 700-8530, Japan (corresponding author). E-mail: [email protected]
Takayuki Shuku [email protected]
Assistant Professor, Graduate School of Environmental and Life Science, Okayama Univ., 3-1-1 Tsushima-naka, Kita-ku, Okayama 700-8530, Japan. E-mail: [email protected]
Kazunori Fujisawa [email protected]
Lecturer, Graduate School of Agriculture, Kyoto Univ., Kitashirakawa Oiwake-cho, Sakyo-ku, Kyoto 606-8502, Japan. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share