Constitutive Modeling and Testing of Interface between Backfill Soil and Fiber-Reinforced Polymer
Publication: International Journal of Geomechanics
Volume 14, Issue 3
Abstract
Geomaterials behave differently under different types of loadings, such as compression, shear, or tension; they exhibit weaker response in tension. To increase the tensile and shear strengths of the soil, different methods of reinforcement, such as geosynthetics, have been used in earth structures such as retaining walls, earth dams, and slopes. The use of geosynthetics has attracted the attention of engineers and researchers in recent years. However, there are some significant problems associated with geosynthetics, such as low tensile strength, creep, and for some applications, a low stiffness modulus. In this research, a geocomposite (GC), made of carbon fiber–reinforced polymer (CFRP), is proposed and studied. The interface properties of the CFRP and backfill soil are investigated experimentally using a cyclic multidegree-of-freedom (CYMDOF) device. Then an elastic–plastic constitutive model, the hierarchical single surface (HISS), is used to characterize the behavior of the interface between the CFRP and backfill soil. The constitutive model is verified by predicting the laboratory behavior of interface for tests used to find parameters and comparing that to independent tests. Based on the investigation, CFRP can be considered to be appropriate and beneficial as reinforcement in earth structures, because it has relatively high friction angle, high tensile strength, high Young’s modulus, and high resistance to aggressive environment.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abolmaali, A., and Kararam, A. (2013). “Nonlinear finite-element modeling analysis of soil-pipe interaction.” Int. J. Geomech., 197–204.
El-Hoseiny, K. E. (1999). “Analysis of field tensor retained wall with DSC model and FEM.” Ph.D. Dissertation, Dept. of Civil Engineering and Engineering Mechanics, Univ. of Arizona, Tucson, AZ.
Desai, C. S. (1980). “A general basis for yield, failure and potential functions in plasticity.” Int. J. Numer. Anal. Methods Geomech., 4(4), 361–375.
Desai, C. S. (1994). “Hierarchical single surface and the disturbed state constitutive models with emphasis on geotechnical applications.” Chapter 5, Geotechnical engineering, K. R. Saxena, ed., IBH, New Delhi, India.
Desai, C. S. (1995). “Constitutive modelling using the disturbed state as microstructure self-adjustment concept.” Chapter 8, Continuum models for materials with microstructure, H. B. Mühlhaus, ed., Wiley, New York.
Desai, C. S. (2001). Mechanics of materials and interfaces: The disturbed state concept, CRC Press, Boca Raton, FL.
Desai, C. S., and El-Hoseiny, K. E. (2005). “Prediction of field behavior of reinforced soil wall using advanced constitutive model.” J. Geotech. Geoenviron. Eng., 729–739.
Desai, C. S., and Faruque, M. O. (1984). “Constitutive model for (geological) materials.” J. Eng. Mech., 1391–1408.
Desai, C. S., and Fishman, K. L. (1991). “Plasticity based constitutive model with associated testing for joints.” Int. J. Rock Mech. Min. Sci., 28(1), 15–26.
Desai, C. S., and Rigby, D. B. (1997). “Cyclic interface and joint shear device including pore pressure effects.” J. Geotech. Geoenviron. Eng., 568–579.
Desai, C. S., Somasundaram, S., and Frantziskonis, G. (1986). “A hierarchical approach for constitutive modelling of geologic materials.” Int. J. Numer. Anal. Methods Geomech., 10(3), 225–257.
Desai, C. S., Zaman, M. M., Lightner, J. G., and Siriwardane, H. J. (1984). “Thin-layer element for interfaces and joints.” Int. J. Numer. Anal. Methods Geomech., 8(1), 19–43.
Frost, J. D., and Han, J. (1999). “Behavior of interfaces between fiber-reinforced polymers and sands.” J. Geotech. Geoenviron. Eng., 633–640.
Hanna, T. H. (1982). Foundations in tension: Ground anchors, McGraw Hill, New York.
MATLAB 7.12 (R2011a) [Computer software]. Natick, MA, MathWorks.
Pando, M. A., Filz, G. M., Dove, J. E., and Hoppe, E. J. (2002). “Interface shear tests on FRP composite piles.” Proc., Deep Foundations 2002: An International Perspective on Theory, Design, Construction, and Performance, ASCE, Reston, VA, 1486–1500.
Pei, H., Yin, J., Zhu, H., Hong, C. (2013). “Performance monitoring of a glass fiber-reinforced polymer bar soil nail during laboratory pullout test using FBG sensing technology.” Int. J. Geomech., 467–472.
Saadatmanesh, H., Tavakkolizadeh, M., and Mostofinejad, D. (2010). “Environmental effects on mechanical properties of wet lay-up fiber-reinforced polymer.” ACI Mater. J., 107(3), 267–274.
Sakr, M., El Naggar, M. H., and Nehdi, M. (2005). “Interface characteristics and laboratory constructability tests of novel fiber-reinforced polymer/concrete piles.” J. Compos. Constr., 274–283.
Sayed-Ahmed, E. Y., and Shrive, N. G. (1998). “A new steel anchorage system for post-tensioning applications using carbon fibre reinforced plastic tendons.” Can. J. Civ. Eng., 25(1), 113–127.
Shrive, N. G. (2006). “The use of fibre reinforced polymers to improve seismic resistance of masonry.” Construct. Build. Mater., 20(4), 269–277.
Xue, X., Yang, X., and Liu, E. (2013). “Application of the modified Goodman model in soil nailing.” Int. J. Geomech., 41–48.
Zhang, B., Benmokrane, B., and Ebead, U. A. A. (2006). “Design and evaluation of fiber-reinforced polymer bond-type anchorages and ground anchors.” Int. J. Geomech., 166–175.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 11, 2012
Accepted: Feb 22, 2013
Published online: Feb 25, 2013
Published in print: Jun 1, 2014
Discussion open until: Aug 24, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.