Behavior of Fresh and Fouled Railway Ballast Subjected to Direct Shear Testing: Discrete Element Simulation
Publication: International Journal of Geomechanics
Volume 14, Issue 1
Abstract
This paper presents the three-dimensional discrete element method (DEM) that was used to study the shear behavior of fresh and coal fouled ballast in direct shear testing. The volumetric changes and stress-strain behavior of fresh and fouled ballast were simulated and compared with the experimental results. Clump logic in particle flow code in three dimensions () incorporated in a subroutine was used to simulate irregular-shaped particles in which groups of 10–20 spherical balls were clumped together in appropriate sizes to simulate ballast particles. Fouled ballast with a various void contaminant index (VCI) ranging from 20 to 70% VCI was modeled by injecting a specified number of miniature spherical particles into the voids of fresh ballast. The DEM simulation captures the behavior of fresh and fouled ballast as observed in the laboratory, showing that the peak shear stress of the ballast assembly decreases and the dilation of fouled ballast increases with an increasing VCI. Furthermore, the DEM also provides insight to the distribution of contact force chains and particle displacement vectors, which cannot be determined experimentally. These micromechanical observations clearly justify the formation of a shear band and the evolution of volumetric changes during shearing. The reduced maximum contact force associated with increased particle contact area due to fouling explains the decreased breakage of fouled ballast. An acceptable agreement was found between the DEM model predictions and laboratory data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support provided by CRC for Rail Innovation. The laboratory assistance of Mr. Alan Grant is also appreciated.
References
Anderson, W. F., and Fair, P. (2008). “Behavior of railroad ballast under monotonic and cyclic loading.” J. Geotech. Geoenviron. Eng., 316–327.
Aursudkij, B., McDowell, G. R., and Collop, A. C. (2009). “Cyclic loading of railway ballast under triaxial conditions and in a railway test facility.” Granular Matter, 11(6), 391–401.
Charles, J. A., and Watts, K. S. (1980). “The influence of confining pressure on the shear strength of compacted rockfill.” Géotechnique, 30(4), 353–367.
Cui, L., and O’Sullivan, C. (2006). “Exploring the macro- and micro-scale response of an idealised granular material in the direct shear apparatus.” Géotechnique, 56(7), 455–468.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Dombrow, W., Huang, H., and Tutumluer, E. (2009). “Comparison of coal dust fouled railroad ballast behavior- granite vs. limestone.” Bearing Capacity of Roads, Railways and Airfields, Proc., 8th Int. Conf. BCR2A’09, Taylor & Francis, London, 1349–1357.
Feldman, F., and Nissen, D. (2002). “Alternative testing method for the measurement of ballast fouling.” Conf. on Railway Engineering, RSTA, Wollongong, Australia.
Ferellec, J. F., and McDowell, G. R. (2008). “A simple method to create complex particle shapes for DEM.” Geomech. Geoeng., 3(3), 211–216.
Hossain, Z., Indraratna, B., Darve, F., and Thakur, P. K. (2007). “DEM analysis of angular ballast breakage under cyclic loading.” Geomech. Geoeng., 2(3), 175–181.
Huang, H., and Tutumluer, E. (2011). “Discrete element modeling for fouled railroad ballast.” Constr. Build. Mater., 25(8), 3306–3312.
Huang, H., Tutumluer, E., and Dombrow, W. (2009a). “Laboratory characterisation of fouled railroad ballast behavior.” Transportation Research Record 2117, Transportation Research Board, Washington, DC.
Huang, H., Tutumluer, E., Hashash, Y. M. A., and Ghaboussi, J. (2009b). “Discrete element modeling of aggregate behavior in fouled railroad ballast.” Recent advancement in soil behavior, in situ test methods, pile foundations, and tunneling, L. Ali, A. C. Correia, J. Yang, and M. Tao, eds., ASCE, Reston, VA, 33–41.
Indraratna, B., Ionescu, D., and Christie, D. (1998). “Shear behaviour of railway ballast based on large scale triaxial testing.” J. Geotech. Geoenviron. Eng., 439–449.
Indraratna, B., Ngo, N. T., and Rujikiatkamjorn, C. (2011). “Behavior of geogrid-reinforced ballast under various levels of fouling.” Geotextile Geomembr., 29(3), 313–322.
Indraratna, B., Nimbalkar, S., and Tennakoon, N. (2010a). “The behaviour of ballasted track foundations: Track drainage and geosynthetic reinforcement.” GeoFlorida 2010: Advances in analysis, modeling & design, D. O. Fratta, A. J. Puppala, and B. Muhunthan, eds., ASCE, Reston, VA, 2378–2387.
Indraratna, B., and Salim, W. (2002). “Modelling of particle breakage of coarse aggregates incorporating strength and dilatancy.” Proc. Inst. Civ. Eng. Geotech. Eng., 155(4), 243–252.
Indraratna, B., Thakur, P. K., and Vinod, J. S. (2010b). “Experimental and numerical study of railway ballast behavior under cyclic loading.” Int. J. Geomech., 10(4), 136–144.
Indraratna, B., Vinod, J. S., and Lackenby, J. (2009). “Influence of particle breakage on the resilient modulus of railway ballast.” Géotechnique, 59(7), 643–646.
Indraratna, B., Wijewardena, L. S. S., and Balasubramaniam, A. S. (1993). “Large-scale triaxial testing of greywacke rockfill.” Géotechnique, 42(1), 37–51.
Itasca Consulting Group. (2008). Particle flow code in three dimensions (), Minneapolis.
Lackenby, J., Indraratna, B., McDowell, G., and Christie, D. (2007). “Effect of confining pressure on ballast degradation and deformation under cyclic triaxial loading.” Géotechnique, 57(6), 527–536.
Lim, W. L., and McDowell, G. R. (2005). “Discrete element modelling of railway ballast.” Granular Matter, 7(1), 19–29.
Liu, S. H. (2006). “Simulating a direct shear box test by DEM.” Can. Geotech. J., 43(2), 155–168.
Lobo-Guerrero, S., and Vallejo, L. E. (2006). “Discrete element method analysis of railtrack ballast degradation during cyclic loading.” Granular Matter, 8(3-4), 195–204.
Lu, M., and McDowell, G. R. (2006). “Discrete element modelling of ballast abrasion.” Géotechnique, 56(9), 651–655.
Lu, M., and McDowell, G. R. (2007). “The importance of modelling ballast particle shape in the discrete element method.” Granular Matter, 9(1–2), 69–80.
Lu, M., and McDowell, G. R. (2008). “Discrete element modelling of railway ballast under triaxial conditions.” Geomech. Geoeng., 3(4), 257–270.
Marachi, N. D. (1969). “Strength and deformation characteristics of rockfill materials.” Ph.D. thesis, Univ. of California, Berkeley, CA.
Marsal, R. J. (1973). “Mechanical properties of rockfill.” Embankment dam engineering, Wiley, New York, 109–200.
MATLAB 8.0.0.783 [Computer software]. Natick, Massachusetts, MathWorks.
McDowell, G. R., Harireche, O., Konietzky, H., Brown, S. F., and Thom, N. H. (2006). “Discrete element modelling of geogrid-reinforced aggregates.” Geotech. Eng., 159(1), 35–48.
Ni, Q., Powrie, W., Zhang, X., and Harkness, R. (2000). “Effect of particle properties on soil behaviour: 3-D numerical modelling of shearbox test.” Numerical methods in geotechnical engineering, G. M. Filz and D. V. Griffiths, eds., ASCE, Reston, VA, 58–70.
Oda, M., and Iwashita, K. (1999). Mechanics of granular materials: An introduction, Balkema, Rotterdam, Netherlands.
O’Sullivan, C. (2011). Particulate discrete element modelling: A geomechanics perspective, Spon, London.
O’Sullivan, C., and Cui, L. (2009). “Micromechanics of granular material response during load reversals: Combined DEM and experimental study.” Powder Technol., 193(3), 289–302.
O’Sullivan, C., Cui, L., and O’Neill, S. C. (2008). “Discrete element analysis of the response of granular materials during cyclic loading.” Soils Found., 48(4), 511–530.
Selig, E. T., and Waters, J. M. (1994). Track geotechnology and substructure management, Thomas Telford, London.
Sitharam, T. G., and Vinod, J. S. (2005). “Shear behavior of glass beads using DEM.” Proc., 5th Int. Conf. on Micromechanics of Granular Media, Vol. 1, Taylor & Francis, New York.
Sitharam, T. G., and Vinod, J. S. (2008). “Numerical simulation of liquefaction and pore pressure generation in granular materials using DEM.” Int. J. Geotech. Eng., 2(2), 103–113.
Sitharam, T. G., and Vinod, J. S. (2009). “Critical state behaviour of granular materials from isotropic and rebounded paths: DEM simulations.” Granular Matter, 11(1), 33–42.
Stahl, M., and Konietzky, H. (2011). “Discrete element simulation of ballast and gravel under special consideration of grain-shape, grain size and relative density.” Granular Matter, 13(4), 417–428.
Suiker, A. S. J., Selig, E. T., and Frenkel, R. (2005). “Static and cyclic triaxial testing of ballast and subballast.” J. Geotech. Geoenviron. Eng., 771–782.
Thakur, P. K., Vinod, J. S., and Indraratna, B. (2010). “Effect of particle breakage on cyclic densification of ballast: A DEM approach.” Mater. Sci. Eng., 10(1), 1–7.
Tutumluer, E., Dombrow, W., and Huang, H. (2008). “Laboratory characterization of coal dust fouled ballast behavior.” Proc., AREMA 2008 Annual Conf., American Railway Engineering and Maintenance-of-Way Association (AREMA), Lanham, MD, 21–24.
Tutumluer, E., Huang, H., Hashash, Y., and Ghaboussi, J. (2007). “Discrete element modeling of railroad ballast settlement.” Proc., AREMA 2007 Annual Conf., American Railway Engineering and Maintenance-of-Way Association (AREMA), Lanham, MD.
Wang, J., Dove, J. E., and Gutierrez, M. S. (2007). “Discrete-continuum analysis of shear banding in the direct shear test.” Géotechnique, 57(6), 513–526.
Zhang, L., and Thornton, C. (2007). “A numerical examination of the direct shear test.” Géotechnique, 57(4), 343–354.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 30, 2012
Accepted: Oct 3, 2012
Published online: Oct 4, 2012
Published in print: Feb 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.