Analytical Failure Prediction of Inclined Boreholes
Publication: International Journal of Geomechanics
Volume 13, Issue 3
Abstract
Predicting when, where, and how pressure-induced borehole failures occur is of fundamental importance in borehole stability analysis and hydraulic fracture design. Numerical and statistical methods are not suited for system analysis, while existing analytical solutions depend on failure location, neglect shear stresses, or only consider vertical boreholes. This paper derives explicit analytical relations between far-field stresses and when, where, and how borehole failures occur in arbitrarily oriented boreholes. These relations reveal that when, where, and how failures occur varies characteristically with the borehole orientation. Further, the optimal drilling- and optimal hydraulic fracturing orientations are determined, together with two simple methods for determining the stress regime based on where or how failures occur. It was also found that failure prediction is more sensitive to noise when the formation is more anisotropic and/or closer to failure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author thanks Eirik Kårstad for stimulating conversations and Bernt Aadnøy for his support and help when writing this paper.
References
Aadnøy, B. S. (1987). “A complete elastic model for fluid-induced and in-situ generated stress with the presence of a borehole.” Energy Sources, 9(4), 239–259.
Aadnøy, B. S., Cooper, I., Miska, S. Z., Mitchell, R. F., and Payne, M. L. (2009). Advanced drilling and well technology, SPE Press, Richardson, TX.
Aadnøy, B. S., and Hansen, A. K. (2005). “Bounds on in-situ stress magnitudes improve wellbore stability analyses.” SPE J., 10(2), 115–120.
Al-Ajmi, A., and Zimmerman, R. (2006). “Stability analysis of vertical boreholes using the Mogi-Coulomb failure criterion.” Int. J. Rock Mech. Min. Sci., 43(8), 1200–1211.
Al-Ajmi, A., and Zimmerman, R. (2009). “A new well path optimization model for increased mechanical borehole stability.” J. Petrol. Sci. Eng., 69(1–2), 53–62.
Amadei, B., and Stephansson, O. (1997). Rock stress and its measurement, Chapman & Hall, London, 169.
Andreev, G. E. (1995). Brittle failure of rock materials—Test results and constitutive models, Balkema, Rotterdam, Netherlands.
Bradley, W. (1979). “Failure of inclined boreholes.” J. Energ. Resour., 101(4), 232–239.
Bredehoeft, J., Wolff, R., Keys, W., and Shuter, E. (1976). “Hydraulic fracturing to determine the regional in situ stress field, Piceance basin, Colorado.” Geol. Soc. Am. Bull., 87(2), 250–258.
Camac, B. A., Hunt, S. P., and Boult, P. J. (2006). “Local rotations in borehole breakouts—observed and modeled stress field rotations and their implications for the petroleum industry.” Int. J. Geomech., 6(6), 399–410.
Cui, L., Cheng, A. H.-D., and Abousleiman, Y. (1997). “Poroelastic solutions for an inclined borehole.” J. Appl. Mech., 64(1), 32–38.
Djurhuus, J. (2003). “Analytical investigation of in-situ stresses and hydraulic induced borehole fractures.” Ph.D. thesis, Univ. of the Faroe Islands, Tórshavn, Faroe Islands.
Djurhuus, J., and Aadnøy, B. (2003). “In-situ stress state from inversion of fracturing data from oil wells and borehole image logs.” J. Petrol. Sci. Eng., 38(3–4), 121–130.
Economides, M. J., and Martin, T. (2007). Modern fracturing: Enhancing natural gas production, ET Publishing, Houston, 100.
Economides, M., Oligney, R., and Valko, P. (2002). Unified fracture design, Orsa Press, Alvin, TX.
Ekbote, A., Abousleiman, Y., Cui, L., and Zaman, M. (2004). “Analysis of inclined boreholes in poroelastic media.” Int. J. Geomech., 4(3), 178–190.
Ewy, R. (1999). “Wellbore-stability predictions by use of a modified Lade criterion.” SPE Drill Completion, 14(2), 85–91.
Kårstad, E., and Aadnøy, B. S. (2005). “Optimization of borehole stability using 3-D stress optimization.” Proc., Society of Petroleum Engineers (SPE) Annual Technical Conf. and Exhibition, SPE Press, Dallas.
Mastin, L. (1988). “Effect of borehole deviation on breakout orientation.” J. Geophys. Res., 93(B8), 9187–9195.
Mogi, K. (1971). “Fracture and flow of rock under high triaxial compression.” J. Geophys. Res., 76(5), 1255–1269.
Papanastasiou, P., and Thiercelin, M. (2011). “Modeling borehole and perforation collapse with the capability of predicting the scale effect.” Int. J. Geomech., 11(4), 286–293.
Papanastasiou, P., and Zervos, A. (2004). “Wellbore stability analysis: From linear elasticity to postbifurcation modeling.” Int. J. Geomech., 4(1), 2–12.
Peška, P., and Zoback, M. D. (1995). “Compressive and tensile failure of inclined well bores and determination of in situ stress and rock strength.” J. Geophys. Res., 100(B7), 12,791–12,811.
Zhou, S., Hillis, R., and Sandiford, M. (1996). “On the mechanical stability of inclined wellbores.” SPE Drill. Completion, 11(2), 67–73.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 8, 2009
Accepted: Jan 30, 2012
Published online: Feb 2, 2012
Published in print: Jun 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.