Numerical Modeling of Desiccation Cracking Using the Cohesive Crack Method
Publication: International Journal of Geomechanics
Volume 13, Issue 3
Abstract
With the advent of climate change, it is thought that desiccation cracking of soil will lead to increases in damage to buried infrastructure. Desiccation cracking is a complex phenomenon that historically has been very difficult to model either numerically or analytically. Therefore, there is a need for knowledge on such models to be advanced rapidly. This paper discusses the introduction of cohesive cracks to model fracture attributable to desiccation. The cohesive crack method does not have the limitations of linear elastic fracture mechanics, namely, that an initial notch must be present and that the bulk material must behave in a linear elastic manner. This paper describes how the cohesive crack method has been successfully used to model laboratory desiccation tests of a clay soil. It is shown that, in addition to the tensile strength, the magnitude of fracture energy specified for the material has an impact on crack propagation. The cohesive crack method is proposed as a tool for the numerical modeling of desiccation cracking in many diverse fields.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amarasiri, A. L., Costa, S., and Kodikara, J. K. (2011a). “Determination of cohesive properties for Mode I fracture from compacted clay beams.” Can. Geotech. J., 48(8), 1163–1173.
Amarasiri, A. L., and Kodikara, J. K. (2011a). “Determination of cohesive properties for Mode I fracture from beams of soft rock.” Int. J. Rock Mech. Min. Sci., 48(2), 336–340.
Amarasiri, A. L., and Kodikara, J. K. (2011b). “The use of material interfaces in DEM to simulate soil fracture propagation in Mode I cracking.” Int. J. Geomech., 11(4), 314–322.
Amarasiri, A. L., Kodikara, J. K., and Costa, S. (2011b). “Numerical modelling of desiccation cracking.” Int. J. Anal. Num. Meth. Geomech., 35(1), 82–96.
Barenblatt, G. I. (1962). “The mathematical theory of equilibrium of cracks in brittle fracture.” Adv. Appl. Mech., 7, 55–129.
Bazant, Z. P. (2002). “Concrete fracture models: Testing and practice.” Eng. Fract. Mech., 69(2), 165–205.
Bazant, Z. P., and Planas, J. (1998). Fracture and size effect in concrete and other quasibrittle materials, CRC, Washington, DC.
Berney, E. S., IV, Hodo, W. D., Peters, J. F., Myers, T. E., Olsen, R. S., and Sharp, M. K. (2008). “Assessment of the effectiveness of clay soil covers as engineering barriers in waste disposal facilities with emphasis on modelling cracking behavior.” Rep. ERDC TR-08-7, U.S. Army Engineer Research and Development Centre, Vicksburg, MS.
Budhu, M. (2011). “Earth fissure formation from the mechanics of groundwater pumping.” Int. J. Geomech., 11(1), 1–11.
Corte, A., and Higashi, A. (1964). “Experimental research on desiccation cracks in soil.” Rep. CRREL-RR-66, U.S. Army Materiel Command Cold Regions Research and Engineering Laboratory, Hanover, NH.
Costa, W. S. (2010). “Study of desiccation cracking and fracture properties of clay soils.” Ph.D. thesis, Monash Univ., Victoria, Australia.
Dugdale, D. S. (1960). “Yielding of steel sheets containing slits.” J. Mech. Phys. Solids, 8(2), 100–108.
FISH [Computer software]. Minneapolis, Itasca.
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, Wiley, New York.
Guinea, G. V., Planas, J., and Elices, M. (1994a). “Correlation between the softening and the size effect curves.” Size effect in concrete structures, H. Mihashi, H. Okamura, and Z. P. Bazant, eds., Spon, London, 233–244.
Guinea, G. V., Planas, J., and Elices, M. (1994b). “A general bilinear fit for the softening curve of concrete.” Mater. Struct., 27(2), 99–105.
Hallett, P. D., and Newson, T. A. (2005). “Describing soil crack formation using elastic-plastic fracture mechanics.” Eur. J. Soil Sci., 56(1), 31–38.
Hu, L. B., Hueckel, T., Peron, H., and Laloui, L. (2008). “Modelling evaporation, shrinkage, and cracking of desiccating soils.” Proc., 12th Int. Conf. Int. Association for Computer Methods and Advances in Geomechanics, D. N. Singh, ed., IIT Mumbai, Goa, India, 1083–1090.
Itasca. (2004a). UDEC user’s guide, Itasca, Minneapolis.
Itasca. (2004b). UDEC: Theory and background, Itasca, Minneapolis.
Jenkins, D. R. (2005). “Optimal spacing and penetration of cracks in shrinking slab.” Phys. Rev. E, 71(5), 056117.
Jian-Zhong, L., Fang-Le, P., and Lisheng X. (2009). “One-dimensional viscous behavior of clay and its constitutive modeling.” Int. J. Geomech., 9(2), 43–51.
Kodikara, J., Barbour, S. L., and Fredlund, D. G. (1999). “Changes in clay structure and behaviour due to wetting and drying.” Proc., 8th Australia New Zealand Conf. on Geomechanics: Consolidating Knowledge, Australian Geomechanics Society, Barton, Australia, 179–185.
Kodikara, J. K., and Choi, X. (2006). “A simplified analytical model for desiccation cracking of clay layers in laboratory tests.” Proc., 4th Int. Conf. on Unsaturated Soils, G. A. Miller, C. E. Zapata, S. L. Houston, and D. G. Fredlund, eds., Vol. 2, ASCE, Reston, VA, 2558–2567.
Kodikara, J. K., Nahlawi, H., and Bouazza, A. (2004). “Modelling of curling in desiccating clay.” Can. Geotech. J., 41(3), 560–566.
Konrad, J. M., and Ayad, R. (1997). “An idealized framework for the analysis of cohesive soils undergoing desiccation.” Can. Geotech. J., 34(4), 477–488.
Morris, P. H., Graham, J., and Williams, D. J. (1992). “Cracking in drying soils.” Can. Geotech. J., 29(2), 263–277.
Nahlawi, H. (2004). “Behaviour of a reactive soil during desiccation.” M.Eng. thesis, Dept. of Civil Engineering, Monash Univ., Victoria, Australia.
Nahlawi, H., Chakrabarti, S., and Kodikara, J. K. (2004). “A direct tensile strength testing method for unsaturated geomaterials.” Geotech. Test. J., 27(4), 1–6.
Nahlawi, H., and Kodikara, J. K. (2006). “Laboratory experiments on desiccation cracking of thin soil layers.” Geotech. Geol. Eng., 24(6), 1641–1664.
Nguyen, O., Repetto, E. A., Ortiz, M., and Radovitzky, R. A. (2001). “A cohesive model of fatigue crack growth.” Int. J. Fract., 110(4), 351–369.
Prat, P. C., Ledesma, A., Lakshmikantha, M. R., Levatti, H., and Tapia, J. (2008). “Fracture mechanics for crack propagation in drying soils.” Proc., 12th Int. Conf. Int. Association for Computer Methods and Advances in Geomechanics, D. N. Singh, ed., IIT Mumbai, Goa, India, 1060–1067.
Rayhani, M. H. T., and El Naggar, M. H. (2008). “Dynamic properties of soft clay and loose sand from seismic centrifuge tests.” Geotech. Geol. Eng., 26(5), 593–602.
Rojas, E., Romo, M. P., Garnica, P., and Cervantes, R. (2006a). “Analysis of deep moisture barriers in expansive soils. I: Constitutive model formulation.” Int. J. Geomech., 6(5), 311–318.
Rojas, E., Romo, M. P., Garnica, P., and Cervantes, R. (2006b). “Analysis of deep moisture barriers in expansive soils. II: Water flow formulation and implementation.” Int. J. Geomech., 6(5), 319–327.
Serebrinsky, S., and Ortiz, M. (2005). “A hysteretic cohesive-law model of fatigue-crack nucleation.” Scr. Mater., 53(10), 1193–1196.
Universal Distinct Element Code 4.0 [Computer software]. Minneapolis, Itasca.
Yu, R. C., and Ruiz, G. (2006). “Explicit finite element modelling of static crack propagation in reinforced concrete.” Int. J. Fract., 141(3–4), 357–372.
Zhou, Y., and Rowe, R. K. (2005). “Modelling clay liner desiccation.” Int. J. Geomech., 5(1), 1–9.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Apr 28, 2011
Accepted: Nov 4, 2011
Published online: Nov 8, 2011
Published in print: Jun 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.