Design Guide for Rigid Foundation Systems on Expansive Soils
Publication: International Journal of Geomechanics
Volume 12, Issue 5
Abstract
Expansive soils pose a major nightmare for practicing geotechnical engineers in the semiarid and arid zones of the world. The introduction of rigid substructure is a costly approach but can be made practical and financially tolerable for soils where expansion is characterized within medium to low problematic classes. This paper outlines justifications and design concepts for a rigid substructure foundation of a two-story concrete frame structure. The project was constructed in a district in Saudi Arabia where many buildings experienced serious damage because of expansive soil problems. Upheaval forces likely to act against the proposed structure were determined and used in a finite-element analysis to design an appropriate rigid substructure. Plots of moments and shear forces were determined, and critical sections were pointed out. The main reason for choosing the rigid alternative is to reduce the differential settlement, which is likely to be exaggerated in flexible designs. The settlement measured on site indicated that the rigid system design gives a reduced total settlement and differential settlement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We would like to acknowledge the support of Bugshan Research Chair in Expansive Soils, King Saud University, Saudi Arabia.
References
Abdelmalak, R., and Briaud, J.-L. (2006). “Comparison of beam depths for stiffened slabs on shrink-swell soils using WRI, PTI 2004 and AS 2870.” Proc. 4th Int. Conf. Unsaturated Soils, Vol. 1, ASCE, Reston, VA, 345–353.
Abduljawad, S. N. (1991). “Characteristics and chemical treatment of expansive clay in Al Qatif, Saudi Arabia.” Eng. Geol. J., 30(2), 143–158.
Al Muhandis, N. K. (2006). “Court complex building site.” Geotech. Rep. No. 093/02/2006, Al Muhandis Nizar Kurdi, Riyadh, Saudi Arabia.
Al-Shamrani, M. A., and Dhowian, A. W. (2003). “Experimental study of lateral restraint effects on the potential heaves.” Eng. Geol., 69(1–2), 63–81.
Al-Sheraida, F. M. (2008). “The effect of chemical addition on expansive soil under dry condition.” BS in Civil Engineering partial degree requirement, King Saud Univ., Riyadh, Saudi Arabia.
Briaud, J.-L., Abdelmalak, R., and Zhang, X. (2010). “Design of stiffened slabs-on-grade on shrink-swell soil.” Proc. 5th Int. Conf. Unsaturated Soil, International Center for Numerical Methods in Engineering, Barcelona, Spain.
British Standards Institution. (1997). “Structural use of concrete: British Standards. Code of Practice for reinforced concrete design.” CP8110, London.
Building Research Advisory Board. (1968). National Research Council criteria for selection and design of residential slabs-on-ground, U.S. National Academy of Science Publication. Washington, DC.
Chen, F. H. (1988). Foundation on expansive soil, Elsevier, Amsterdam, Netherlands.
Dafalla, M. A. and Al-Shamrani, M. A. (2008). “Performance based solutions for foundations on expansive soils—Alghatt region, Saudi Arabia.” Geo-Chiangmai Conf., CI-Premier Pte. Ltd., Singapore, 149–155.
Dhowian, A. W., Erol, A. O., and Youssef, A. (1990). “Evaluation of expansive soils and foundation methodology in the Kingdom of Saudi Arabia.” Rep. AT-5-88, General Directorate Research Grants Programs, King Abdulaziz City for Science and Technology, Riyadh, Kingdom of Saudi Arabia.
Fraser, R. A., and Wardle, L. J. (1975). “The analysis of stiffened raft foundations on expansive soils.” Symp. Recent Develop. Analysis Soil Behav. Appl. Geotech. Struct., Univ. of New South Wales, Sydney, Australia, 89–98.
Lytton, R. L. (1970). “Design criteria for residential slabs and grillage rafts on reactive clay.” Rep. for Australian Commonwealth Scientific and Industrial Research Organization, Melborne, Australia.
Lytton, R. L., and Woodburn, J. A. (1973). “Design and performance of mat foundations on expansive clay.” Proc. 3rd Int. Conf. Expan. Soils, Vol. 1, Society of Soil Mechanics and Foundation Engineering, Haifa, Israel, 301–307.
Mitchell, P. W. (1979). “The structural analysis of footings on expansive soils.” Res. Rep. No. 1, K.W.G. Smith, Newton, Australia.
Mitchell, P. W. (1980). “The concepts defining the rate of swell in expansive soils. ” Proc. 4th Int. Conf. Expan. Soils, Vol. 1, ASCE, New York, 106–116.
Nelson, J. D., and Miller, D. J. (1997). Expansive soils: Problems and practice in foundation and pavement engineering, Wiley, New York.
Standards Association of Australia. (1997). “The design of residential slabs and footings.” SAA HB28-1997, Homebush, Australia.
Walsh, P. F. (1974). “The design of residential slabs-on-ground.” Technical Paper (2nd Series) 5, Division of Building Research, Commonwealth Scientific and Industrial Research Organization, Victoria, Australia.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 12 • Issue 5 • October 2012
Pages: 528 - 536
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Mar 17, 2010
Accepted: May 19, 2011
Published online: May 23, 2011
Published in print: Oct 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.