Computational Simulation of Mechanized Tunneling as Part of an Integrated Decision Support Platform
Publication: International Journal of Geomechanics
Volume 11, Issue 6
Abstract
Mechanized tunneling is characterized by a staged procedure of excavation and lining erection and continuous support of the soil by means of supporting fluids (or compressed air) at the tunnel face and pressurized grouting of the tail gap. The interactions between the tunnel boring machine (TBM), the support measures, and the soil, including the groundwater, determine the efficiency, safety, and effects on the existing infrastructure. In this paper, a process-oriented numerical simulation model for mechanized tunneling and its integration in the context of an integrated optimization platform for tunneling (IOPT) is addressed. The simulation model is based upon the finite-element method and considers the transient excavation process and all relevant components, support measures, and processes, along with their interactions during tunnel advance. In particular, the model allows the investigation of the effects of drilling and stand-still periods upon the generation of a filter cake at the tunnel face. This is demonstrated by the numerical analysis of a straight tunnel advance by means of a hydroshield machine in water-saturated soft soil.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work has been supported by the European Commission within the integrated project TUNCONSTRUCT (UNSPECIFIEDIP011817-2). Cofunding to the second and third writers was also provided by the Ruhr-University Research School funded by the German Research Foundation (DFG) in the framework of the Excellence Initiative. This support is gratefully acknowledged.
References
Alonso, E. E., Gens, A., and Josa, A. (1990). “Constitutive model for partially saturated soils.” Géotechnique, 40(3), 405–430.
Babendererde, S. (1999). “Grouting the shield tail gap.” Tunnels and Tunneling International, 11, 48–49.
Beer, G. (2003). Numerical simulation in tunneling, Springer, Vienna, Austria.
Beer, G., ed. (2009). Technology innovation in underground construction, Taylor and Francis Group, London, UK.
Bezuijen, A., Pruiksma, J. P., and van Merten, H. H. (2001). “Pore pressures in front of tunnel, measurements, calculations and consequences for stability of tunnel face.” Modern tunneling science and technology, T. K. Adachi and M. Kimura, eds., Kyoto, Japan, 799–804.
Bishop, A. W. (1959). “The principle of effective stress.” Teknisk Ukeblad, 39(106), 859–863.
Blom, C. (2002). “Design philosophy of concrete linings for tunnels in soft soils.” Ph.D. thesis, Delft Univ., Delft, Netherlands.
Broere, W. (2001). “Tunnel face stability and new CPT applications.” Ph.D. thesis, Technical University Delft, The Netherlands.
Chmelina, K. (2009). “A virtual reality system for the visualization of underground construction data.” Computational methods in tunneling (Proc., EURO:TUN 2009), G. Meschke, G. Beer, J. Eberhardsteiner, D. Hartmann, and M. Thewes, eds., Vol. 2, Aedificatio Publishers, Freiburg, Germany, 883–890.
Ehlers, W., and Bluhm, J. (2002). Porous media, Springer, Berlin.
Hartmann, D., et al. (2009). “Computer-support for the design of underground structures.” Technology innovation in underground construction, G. Beer, ed., Taylor and Francis, London, 31–50.
Kasper, T., and Meschke, G. (2004). “A 3D finite element simulation model for TBM tunneling in soft ground.” Int. J. Numer. Anal. Methods Geomech., 28(14), 1441–1460.
Kasper, T., and Meschke, G. (2006a). “A numerical study of the effect of soil and grout material properties and cover depth in shield tunneling.” Comput. Geotech., 33(4–5), 234–247.
Kasper, T., and Meschke, G. (2006b). “On the influence of face pressure, grouting pressure and TBM design in soft ground tunneling.” Tunneling and Underground Space Tech., 21(2), 160–171.
Komiya, K. (2009). “FE modelling of excavation and operation of a shield tunneling machine.” Geomechanics and Tunneling, 2(2), 199–208.
Laursen, T. A. (2002). Computational contact and impact mechanics, Springer, Berlin.
Lehner, K., and Hartmann, D. (2007). “Using knowledge based fuzzy logic components in the design of underground engineering structures.” Proc., 1st EURO:TUN (Computational Methods in Tunneling), J. Eberhardsteiner, G. Beer, C. Hellmich, H. A. Mang, G. Meschke, and W. Schubert, eds., Technische Universität Wien, Vienna, Austria.
Meschke, G., Kropik, C., and Mang, H. A. (1996). “Numerical analysis of tunnel linings by means of a viscoplastic material model for shotcrete.” Int. J. Numer. Methods Eng., 39(18), 3145–3162.
Möller, S. C., and Vermeer, P. A. (2008). “On numerical simulation of tunnel installation.” Tunneling and Underground Space Tech., 23(4), 461–475.
Mroueh, H., and Shahrour, I. (2008). “A simplified 3D model for tunnel construction using tunnel boring machines.” Tunneling and Underground Space Tech., 23(1), 38–45.
Mualem, Y. (1978). “Hydraulic conductivity of unsaturated porous media: Generalized macroscopic approach.” Water Resour. Res., 14(2), 325–334.
Nagel, F., and Meschke, G. (2009). “An elasto-plastic three phase model for partially saturated soil for the finite element simulation of compressed air support in tunneling.” Int. J. Numer. Anal. Methods Geomech., 34(6), 605–625.
Nagel, F., Stascheit, J., and Meschke, G. (2008). “A numerical simulation model for shield tunneling with compressed air support.” Geomechanics and Tunneling, 1(3), 222–228.
Nagel, F., Stascheit, J., Meschke, G., Gens, A., and Rodic, T. (2010). “Process-oriented numerical simulation of mechanized tunneling.” Technology innovation in underground construction, G. Beer, ed., Taylor and Francis Group, London, U.K., 87–128.
Roscoe, K. H., and Schofield, A. N. (1963). “Mechanical behavior of an idealized wet clay.” Proc., 2nd European Conf. Soil Mechanics and Foundation Engineering (SMFE), Wiesbaden, Germany, 47–54.
Schanz, T., Vermeer, P., and Bonnier, P. (1999). “The hardening soil model: Formulation and verification.” Beyond 2000 in computational geotechnics, R. Brinkgreve, ed., Balkema, Rotterdam, 281–290.
Sheng, D., and Fredlund, D. (2008). “Elasto-plastic modelling of unsaturated soils: An overview.” Proc., 12th Int. Assoc. for Computer Methods and Advances in Geomechanics (IACMAG) Conf., D. N. Singh, ed., Goa, India.
Stavropoulou, M., Exadaktylos, G., and Saratsis, G. (2007). “A combined three-dimensional geological-geostatistical numerical model of underground excavations in rock.” Rock mechanics and rock engineering, 40(3), 213–243.
Stascheit, J., Nagel, F., Meschke, G., Stavropoulou, M., and Exadaktylos, G. (2007). “An automatic modeller for finite element simulations of shield tunneling.” Proc., 1st. EURO:TUN (Computational Methods in Tunneling), J. Eberhardsteiner, G. Beer, C. Hellmich, H. A. Mang, G. Meschke, and W. Schubert, eds., Technische Universität Wien, Vienna, Austria.
Stascheit, J., Dadvand, P., and Meschke, G. (2009). “Parallelisation techniques for the numerical simulation of shield tunnelling processes.” International Conf. on Computational Methods in Tunneling (EURO:TUN), G. Meschke, G. Beer, J. Eberhardsteiner, D. Hartmann, and M. Thewes, ed., Aedificatio Publishers, Freiburg. Germany, 1032–1038.
van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soil.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Yu, H. S. (1998). “CASM: A unified state parameter model for clay and sand.” Int. J. Numer. Anal. Meth. Geomech., 22(8), 621–653.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Nov 2, 2009
Accepted: Apr 7, 2010
Published online: May 1, 2010
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.