Study of Caprock Integrity in Geosequestration of Carbon Dioxide
Publication: International Journal of Geomechanics
Volume 11, Issue 4
Abstract
The Industrial Revolution has led to a substantial increase in the emission of greenhouse gas (GHG) such as carbon dioxide () into the atmosphere, exacerbating the global-warming phenomenon. One option to mitigate GHG emission is by capturing and safely storing the in suitable deep underground geological formations. This paper provides a literature review on the potential changes in permeability and geomechanical properties of the caprock and sedimentary reservoir rock caused by the injected under in situ conditions, highlighting the factors that can potentially hamper the caprock’s integrity. A two-dimensional (2D) axisymmetric numerical model of an ideal reservoir with 30 years of injection and 70 years of monitoring phase is also presented. The model results suggest that, for the parametric values and reservoir conditions used in the model, the injection pressure leads to an increase in pore pressure, thereby reducing the effective stress in the formation. An induced vertical displacement of less than 3 mm is observed at the caprock-reservoir interface at the end of the 100-year period. The observed relationships between injection pressure, effective stress, and total displacement are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bachu, S. (2000). “Sequestration of in geological media: Criteria and approach for site selection in response to climate change.”Energy Convers. Manage., 41(9), 953–970.
Bachu, S., Gunter, W. D., and Perkins, E. H. (1994). “Aquifer disposal of : Hydrodynamic and mineral trapping.” Energy Convers. Manage., 35(4), 269–279.
Bickle, M., Chadwick, A., Herbert, E. H., Hallworth, M., and Lyle, S. (2007). “Modelling carbon dioxide accumulation at Sleipner: Implications for underground carbon storage.” Earth Planet. Sci. Lett., 255(1–2), 164–176.
Bieniawski, Z. T. (1967). “Stability concept of brittle fracture propagation in rock.” Eng. Geol., 2(3), 149–162.
Bouchard, R., and Delaytermoz, A. (2004). “Integrated path towards geological storage.” Energy, 29(9–10), 1339–1346.
Chiquet, P., Daridon, J., Broseta, D., and Thibeau, S. (2007). “/water interfacial tensions under pressure and temperature conditions of geological storage.” Energy Convers. Manage., 48(3), 736–744.
Cook, J. P. (2006). “Carbon dioxide capture and geological storage: research, development and application in Australia.” Int. J. Environ. Stud., 63(6), 731–749.
Damen, K., Faaij, A., and Turenburg, W. (2003). “Health, safety and environmental risks of underground sequestration.” Copernicus Institute for Sustainable Development and Innovation, Rep. NWS-E-2003-30, Dept. of Science, Technology and Society, Utrecht Univ., Utrecht, Netherlands.
Eberhardt, E., Stead, D., and Read, R. S. (1998a). “Identifying crack initiation and propagation thresholds in brittle rock.” Can. Geotech. J., 35, 222–232.
Eberhardt, E., Stead, D., Stimpson, B., and Lajtai, E. Z. (1998b). “The effect of neighbouring cracks on elliptical crack initiation and propagation in uniaxial and triaxial stress fields.” Eng. Fract. Mech., 59(2), 103–115.
Eberhardt, E., Stead, D., Stimpson, B., and Read, R. S. (1997). “Changes in acoustic event properties with progressive fracture damage.” Int. J. Rock Mech. Min. Sci., 34(3–4), 633.
Golomb, D. (1993). “Ocean disposal of : Feasibility, economics and effects.” Energy Convers. Manage., 34(9–11), 967–976.
Haszeldine, R. S., et al. (2005). “Natural geochemical analogues for carbon dioxide storage in deep geological porous reservoirs, a United Kingdom perspective.” Oil Gas Sci. Tech.—Rev. IFP, 60(1), 33–49.
Hawkes, C. D., McLellan, P. J., Zimmer, U., and Bachu, S. (2004). “Geomechanical factors affecting geological storage of in depleted oil and gas reservoirs: Risks and mechanisms.” Proc. of Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS): Rock Mechanics Across Borders and Disciplines, American Rock Mechanics Association, Houston.
Houghton, J. T., et al. (2001). “IPCC climate change 2001: The scientific basis.” Third assessment report of intergovernmental panel on climate change, Cambridge University Press, New York.
House, J., Prentice, C., and Le Quere, C. (2002). “Maximum impacts of future reforestation or deforestation on atmospheric .” Global Change Biol., 8(11), 1047–1052.
Jasinge, D., Ranjith, P. G., Choi, S. K., Kodikara, J., Arthur, M., and Li, H. (2009). “Mechanical properties of reconstituted Australian black coal.” J. Geotech. Geoenviron. Eng., 135(7), 980–985.
Kaszuba, J. P., Janecky, D. R., and Snow, M. G. (2003). “Carbon dioxide reaction processes in a model brine aquifer at 200°C and 200 bars: Implications for geologic sequestration of carbon.” Appl. Geochem., 18(7), 1065–1080.
Kharaka, Y. K., Cole, D. R., Hovorka, S. D., Gunter, W. D., Knauss, K. G., and Freifeld, B. M. (2006). “Gas-water-rock interactions in Frio Formation following injection: Implications for the storage of greenhouse gases in sedimentary basins.” Geology, 34(7), 577–580.
Kristinof, R., Ranjith, P. G., and Choi, S. K. (2010). “Finite element simulation of fluid flow in fractured rock media.” Environ. Earth Sci., 60(4), 765–773.
Li, Q., Wu, Z., Lei, X., Murakami, Y., and Satoh, T. (2007). “Experimental and numerical study on the fracture of rocks during injection of -saturated water.” Environ. Geol., 51(7), 1157–1164.
Li, Z., Dong, M., Li, S., and Huang, S. (2006). “ sequestration in depleted oil and gas reservoirs caprock characterization and storage capacity.”Energy Convers. Manage., 47(11–12), 1372–1382.
Liu, L., Suto, Y., Bignall, G., Yamasaki, N., and Hashida, T. (2003). “ injection to granite and sandstone in experimental rock/hot water systems.” Energy Convers. Manage., 44(9), 1399–1410.
MacGill, I., Outhred, H., and Passey, R. (2003). “The Australian electricity industry and climate change: What role for geosequestration?” Electricity Restructuring Group Draft Discussion Paper 0503, UNSW, Sydney, Australia, 〈www.ergo.ee.unsw.edu.au〉 (May 8, 2009).
Martin, C. D., and Chandler, N. A. (1994). “The progressive failure of Lac du Bonnet granite.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 31(6), 643–659.
Okamoto, I., Li, X., and Ohsumi, T. (2005). “Effect of supercritical as the organic solvent on cap rock sealing performance for underground storage.” Energy, 30(11–12), 2344–2351.
Oldenburg, C. M., Stevens, S. H., and Benson, S. M. (2004). “Economic feasibility of carbon sequestration with enhanced gas recovery (CSEGR).” Energy, 29(9–10), 1413–1422.
Peacock, D. C. P., and Mann, A. (2005). “Evaluation of the controls on fracturing in reservoir rocks.” J. Pet. Geol., 28(4), 385–396.
Preston, C., et al. (2005). “IEA GHG Weyburn monitoring and storage project.” Fuel Process. Technol., 86(14–15), 1547–1568.
Rutqvist, J., and Tsang, C. (2002). “A study of caprock hydromechanical changes associated with -injection into a brine formation.” Environ. Geol., 42(2–3), 296–305.
Shukla, R., Ranjith, P. G., Haque, A., and Choi, S. K. (2010). “A review of studies on sequestration and caprock integrity.” Fuel, 89(10), 2651–2664.
Sminchak, J., Gupta, N., Byrer, C., and Bergman, P. (2002). “Issues related to seismic activity induced by the injection of in deep saline aquifers.” J. Energy Environ. Res., 2(1), 32–46.
Soong, Y., Goodman, A. L., McCarthy-Jones, J. R., and Baltrus, J. P. (2004). “Experimental and simulation studies on mineral trapping of with brine.” Energy Convers. Manage., 45(11–12), 1845–1859.
Streit, J. E., and Hillis, R. R. (2004). “Estimating fault stability and sustainable fluid pressures for underground storage of in porous rock.” Energy, 29(9–10), 1445–1456.
van Ruth, P. J., Nelson, E. J., and Hillis, R. R. (2006). “Fault reactivation potential during injection in the Gippsland Basin, Australia.” Explor. Geophys., 37(1), 50–59.
Viete, D. R., and Ranjith, P. G. (2006). “The effect of on the geomechanical and permeability behaviour of brown coal: Implications for coal seam sequestration.” Int. J. Coal Geol., 66(3), 204–216.
Viete, D. R., and Ranjith, P. G. (2007). “The mechanical behaviour of coal with respect to sequestration in deep coal seams.” Fuel, 86(17–18), 2667–2671.
van der Meer, L. G. H. (1993). “Conditions limiting storage in aquifers.” Energy Convers. Manage., 34(9–11), 959–966.
Voormeij, D. A., and Simandl, G. J. (2004). “Geological, ocean and mineral sequestration options: A technical review.” Geosci. Can., 31(1), 11–22.
Wigley, T. M. L., Richels, R., and Edmonds, J. A. (1996). “Economic and environmental choices in the stabilization of atmospheric concentrations.” Nature, 379, 240–243.
Xu, T., Apps, J. A., and Pruess, K. (2004). “Numerical simulation of disposal by mineral trapping in deep aquifers.” Appl. Geochem., 19(6), 917–936.
Xu, T., Apps, J. A., and Pruess, K. (2005). “Mineral sequestration of carbon dioxide in a sandstone–shale system.” Chem. Geol., 217(3–4), 295–318.
Zerai, B., Saylor, B. Z., and Matisoff, G. (2006). “Computer simulation of trapped through mineral precipitation in the Rose Run Sandstone, Ohio.” Appl. Geochem., 21(2), 223–240.
Zhou, W., et al. (2004). “The IEA Weyburn monitoring and storage project—Modeling of the long-term migration of from Weyburn.” Proc. of 7th Int. Conf. on Greenhouse Gas Control Technologies, Vol. 1, E. S. Rubin, D. W. Keith, and C. F. Gilboy, eds., IEA Greenhouse Gas Programme, Vancouver, Canada.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jun 15, 2009
Accepted: Jun 30, 2010
Published online: Jul 31, 2010
Published in print: Aug 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.