Influence of Facade Structure, Glazing Type, and Window-to-Wall Ratio on the Energy Performance of a Detached Residential Building with a Sunspace
Publication: Journal of Energy Engineering
Volume 149, Issue 1
Abstract
This paper discusses the influence of passive façade design of a detached residential building on its energy performance. The research consists of a parameter analysis performed using commercially available software to assess the influence of different façade wall structures, glazing types, and window-to-wall ratios (WWRs) on the energy required for heating and cooling of a detached building with a sunspace. Eighteen variants of façade wall structure (W1–W18) and 20 variants of façade window glazing type (G1–G20) were created for the base model of a building with a sunspace (Model-FW) for the purpose of investigating their influence on energy consumption in the building. All variants of the base model were examined for , , and . The research was conducted for the location of the urban area in the city of Niš, Serbia. The analysis of the results showed that the best-performing façade wall structure in terms of heating energy consumption was Variant W1, which consists of a 0.40-m-thick concrete layer, 0.14-m-thick expanded polystyrene (EPS) thermal insulation layer, and a render/plaster layer on the outside and the inside with the total thickness of 0.03 m. The W1 variant had the largest thermal mass and thermal insulation thickness of all considered variants. Regarding the total energy required for heating and cooling, in the most favorable W1 model, the energy savings were 75.14% (), 35.04% (), and 17.15% (). The analysis of different glazing types showed that triple low-emissivity glazing performed the best in terms of heating energy required for a building with a sunspace. Among the considered models, benefits from triple glazing systems in terms of total energy consumption were 41.59%, 61.04%, and 47.70% for , , and , respectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This paper presents the results of the research supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia.
References
Aelenei, D., H. Leal, and L. Aelenei. 2014. “The use of attached-sunspaces in retrofitting design: The case of residential buildings in Portugal.” Energy Procedia 48 (Feb): 1436–1441. https://doi.org/10.1016/j.egypro.2014.02.162.
Alghoul, S. K., H. G. Rijabo, and M. E. Mashena. 2017. “Energy consumption in buildings: A correlation for the influence of window to wall ratio and window orientation in Tripoli, Libya.” J. Build. Eng. 11 (May): 82–86. https://doi.org/10.1016/j.jobe.2017.04.003.
Allesina, G., C. Ferrari, A. Muscio, and S. Pedrazzi. 2019. “Easy to implement ventilated sunspace for energy retrofit of condominium buildings with balconies.” Renewable Energy 141 (Oct): 541–548. https://doi.org/10.1016/j.renene.2019.04.037.
Babaee, F., R. Fayaz, and M. Sarshar. 2016. “The optimum design of sunspaces in apartment blocks in cold climate.” Archit. Sci. Rev. 59 (3): 239–253. https://doi.org/10.1080/00038628.2015.1077326.
Djordjević, A. V., J. M. Radosavljević, A. V. Vukadinović, J. R. Malenović Nikolić, and I. S. Bogdanović Protić. 2017. “Estimation of indoor temperature for a passive solar building with a combined passive solar system.” J. Energy Eng. 143 (4): 04017008. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000437.
DOE. 2019. Engineering reference, EnergyplusTM Version 9.1.0 documentation. Washington, DC: DOE.
Dragicevic, S. M., M. R. Lambic, J. M. Radosavljevic, and M. T. Raos. 2014. “Estimating the effects of environmental conditions on active solar wall air heating system efficiency.” J. Energy Eng. 141 (3): 1–6. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000156.
Fotopoulou, A., G. Semprini, E. Cattani, Y. Schihin, J. Weyer, R. Gulli, and A. Ferrante. 2018. “Deep renovation in existing residential buildings through façade additions: A case study in a typical residential building of the 70s.” Energy Build. 166 (Jan): 258–270. https://doi.org/10.1016/j.enbuild.2018.01.056.
Guarino, F., A. Athienitis, M. Cellura, and D. Bastien. 2017. “PCM thermal storage design in buildings: Experimental studies and applications to solaria in cold climates.” Appl. Energy 185 (5): 95–106. https://doi.org/10.1016/j.apenergy.2016.10.046.
Jaberansari, M. 2018. The effect of atrium configurations on energy usage in high-rise office buildings in semi-arid climate of Tehran Marveh. Salford, UK: Univ. of Salford.
Kottek, M., J. Grieser, C. Beck, B. Rudolf, and F. Rubel. 2006. “World map of the Köppen-Geiger climate classification updated.” Meteorology 15 (6): 259–263. https://doi.org/10.1127/0941-2948/2006/0130.
Moghtadernejad, S., L. E. Chouinard, and M. S. Mirza. 2020. “Design strategies using multi-criteria decision-making tools to enhance the performance of building façades.” J. Build. Eng. 30 (Jul): 101274. https://doi.org/10.1016/j.jobe.2020.101274.
Monge-Barrio, A., and A. Sánchez-Ostiz. 2015. “Energy efficiency and thermal behaviour of attached sunspaces, in the residential architecture in Spain. Summer conditions.” Energy Build. 108 (5): 244–256. https://doi.org/10.1016/j.enbuild.2015.09.037.
Rempel, A. W. A. R., A. W. A. R. Rempel, K. R. Gates, and B. Shaw. 2016. “Climate-responsive thermal mass design for Pacific Northwest sunspaces.” Renewable Energy 85 (Jan): 981–993. https://doi.org/10.1016/j.renene.2015.07.027.
Remund, J., and S. Kunz. 1997. METEONORM: Global meteorological database for solar energy and applied climatology. Bern, Switzerland: Meteotest.
Saleh, P. H. 2015. “Thermal performance of glazed balconies within heavy weight/thermal mass buildings in Beirut, Lebanon’s hot climate.” Energy Build. 108 (4): 291–303. https://doi.org/10.1016/j.enbuild.2015.09.009.
Sánchez-Ostiz, A., A. Monge-Barrio, S. Domingo-Irigoyen, and P. González-Martínez. 2014. “Design and experimental study of an industrialized sunspace with solar heat storage.” Energy Build. 80 (Sep): 231–246. https://doi.org/10.1016/j.enbuild.2014.05.031.
Sarihi, S., F. Mehdizadeh Saradj, and M. Faizi. 2021. “A critical review of façade retrofit measures for minimizing heating and cooling demand in existing buildings.” Sustainable Cities Soc. 64 (Jan): 102525. https://doi.org/10.1016/j.scs.2020.102525.
Ulpiani, G., D. Giuliani, A. Romagnoli, and C. di Perna. 2017. “Experimental monitoring of a sunspace applied to a NZEB mock-up: Assessing and comparing the energy benefits of different configurations.” Energy Build. 152 (Oct): 194–215. https://doi.org/10.1016/j.enbuild.2017.04.034.
Vishal, G., M. Jyotirmay, T. Surekha, and B. Aviruch. 2003. Building energy simulation. Boca Raton, FL: CRC Press.
Vukadinovic, A. 2020. Kauzalna eksplanacija toplotnog komfora stambenog objekta sa staklenom verandom i emisije polutanata koji nastaju sagorevanjem fosilnih goriva. Niš, Serbia: Univ. Niš.
Vukadinović, A., J. Radosavljević, and A. Đorđević. 2020. “Energy performance impact of using phase-change materials in thermal storage walls of detached residential buildings with a sunspace.” Sol. Energy 206 (4): 228–244. https://doi.org/10.1016/j.solener.2020.06.008.
Vukadinović, A., J. Radosavljević, A. Đorđević, and N. Petrović. 2019. “Effects of the geometry of residential buildings.” FACTA Univ. Ser. Archit. Civ. Eng. 17 (Jan): 105–118. https://doi.org/10.2298/FUACE190227004V.
Vukadinović, A., J. Radosavljević, A. Đorđević, M. Protić, and N. Petrović. 2021. “Multi-objective optimization of energy performance for a detached residential building with a sunspace using the NSGA-II genetic algorithm.” Sol. Energy 224 (Jun): 1426–1444. https://doi.org/10.1016/j.solener.2021.06.082.
Vukadinović, A. V., J. M. Radosavljević, A. V. Djordjević, and D. M. Bonić. 2018. “Estimation of indoor temperature for a passive solar residential building with an attached sunspace during the heating period.” Environ. Prog. Sustainable Energy 38 (4): 13127. https://doi.org/10.1002/ep.13127.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 9, 2022
Accepted: Aug 15, 2022
Published online: Oct 29, 2022
Published in print: Feb 1, 2023
Discussion open until: Mar 29, 2023
ASCE Technical Topics:
- Architectural engineering
- Building design
- Building systems
- Buildings
- Coating
- Design (by type)
- Energy consumption
- Energy engineering
- Engineering fundamentals
- HVAC
- Materials engineering
- Materials processing
- Residential buildings
- Structural engineering
- Structural members
- Structural systems
- Structures (by type)
- Walls
- Windows
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.