Achievement of NO Emission–Free Operation of a HSDI Diesel Engine Using Nitrogen Enrichment of Intake Air and Implications on Performance and Soot Emissions
Publication: Journal of Energy Engineering
Volume 148, Issue 3
Abstract
A theoretical study was conducted to assess the impact of intake-air nitrogen enrichment on the performance characteristics and soot and nitrogen oxide (NO) emissions of a high-speed direct injection (HSDI) single-cylinder diesel engine. Closed-cycle engine simulation code based on a multizone combustion model was used to perform simulations considering three fuels—diesel fuel, Jet Propellant-8 (JP-8), and Rapeseed Methyl Ester (RME)—and four intake-air nitrogen contents—79%, 81%, 83%, and 85% v/v, at an engine speed of 1,200 rpm under various loads. Two modes of diesel engine combustion are considered: constant fueling rate and, hence, rich in-cylinder average fuel/oxygen equivalence ratio (RAFOER) and reduced fueling rate and, hence, constant average fuel/oxygen equivalence ratio (CAFOER). Theoretical results for the cylinder pressure, bulk gas temperature, and in-cylinder soot and NO concentrations are derived at a speed of 1,200 rpm, and at full engine load considering the three examined fuels and the four examined intake-air nitrogen contents. Predictions for the percentage change of indicated power, exhaust gas temperature, exhaust soot, and exhaust NO are also generated for all examined fuels and at all examined nitrogen contents. The most important findings of the present study are as follows. First, intake-air nitrogen enrichment results in the achievement of NO emissions–free diesel operation, while on the other hand, for increased air nitrogen contents, the extremely limited soot oxidation rate keeps the exhaust soot at high levels. Second, under CAFOER conditions, the combustion of a well-known biodiesel such as RME can lead to reductions in both soot and NO emissions, thereby improving the well-known diesel engine soot/NO trade-off limitation.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
Authors wish to express their sincere gratitude to the staff of the Hellenic Air Force and to the staff of Hellenic Petroleum Refinery for the donation of invaluable raw of data.
References
Alkaabi, H., and D. C. Kyritsis. 2020. “Experimental investigation of the phenomenology of AC-driven ethanol electrosprays.” ASCE J. Energy Eng. 146 (61): 04020068. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000719.
Annand, W. J. D. 1963. “Heat transfer in the cylinders of reciprocating internal combustion engines.” Proc. Instrum. Mech. Eng. 177 (1): 973–996. https://doi.org/10.1243/PIME_PROC_1963_177_069_02.
Arkoudeas, P., S. Kalligeros, F. Zannikos, G. Anastopoulos, D. Karonis, D. Korres, and E. Lois. 2003. “Study of using JP-8 aviation fuel and biodiesel in CI engines.” Energy Convers. Manage. 44 (7): 1013–1025. https://doi.org/10.1016/S0196-8904(02)00112-7.
Biruduganti, M. S., S. B. Gupta, and R. Sekar. 2010. “Low temperature combustion using nitrogen enrichment to mitigate NOx from large bore natural gas fueled engines.” J. Eng. Gas Turbines Power 132 (1): 014502. https://doi.org/10.1115/1.3125301.
Borman, G. L., and J. H. Johnson. 1962. Unsteady vaporization histories and trajectories of fuel drops injected into swirling air. New York: SAE International.
Demirbas, A. 2003. “Biodiesel fuels from vegetable oils via catalytic and non-catalytic supercritical alcohol transesterifications and other methods: A survey.” Energy Convers. Manage. 44 (13): 2093–2109. https://doi.org/10.1016/S0196-8904(02)00234-0.
Dent, J. C., and J. A. Derham. 1974. “Air motion in a four-stroke direct injection diesel engine.” Proc. Inst. Mech. Eng. 188 (1): 269–280. https://doi.org/10.1243/PIME_PROC_1974_188_030_02.
Dieselnet. 2021. “New engine and vehicle emissions.” Accessed July 12, 2021. https://dieselnet.com/standards/.
Ferguson, C. R., and A. T. Kirkpatrick. 2016. Internal combustion engines: Applied thermosciences. 3rd ed. New York: Wiley.
Giakoumis, E. G., C. D. Rakopoulos, A. M. Dimaratos, and D. C. Rakopoulos. 2012. “Exhaust emissions of diesel engines operating under transient conditions with biodiesel fuel blends.” Prog. Energy Combust. Sci. 38 (5): 691–715. https://doi.org/10.1016/j.pecs.2012.05.002.
Giakoumis, E. G., C. D. Rakopoulos, and D. C. Rakopoulos. 2014. “Assessment of NOx Emissions during transient diesel engine operation with biodiesel blends.” J. Energy Eng. 140 (3): A4014004. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000136.
Giakoumis, E. G., D. C. Rakopoulos, and C. D. Rakopoulos. 2016. “Combustion noise radiation during dynamic diesel engine operation including effects of various biofuels blends: A review.” Renewable Sustainable Energy Rev. 54 (Feb): 1099–1113. https://doi.org/10.1016/j.rser.2015.10.129.
Glauert, M. B. 1956. “The wall jet.” J. Fluid Mech. 1 (6): 625–643. https://doi.org/10.1017/S002211205600041X.
Heywood, J. B. 1988. Internal combustion engine fundamentals. New York: McGraw-Hill.
Hiroyasu, H., T. Kadota, and M. Arai. 1983. “Development and use of a spray combustion modelling to predict diesel engine efficiency and pollutant emissions: Part I Combustion modeling.” Bull. JSME 26 (214): 569–575. https://doi.org/10.1299/jsme1958.26.569.
Kadota, T., H. Hiroyasu, and H. Oya. 1976. “Spontaneous ignition delay of a fuel droplet in high pressure and high temperature gaseous environments.” Bull. JSME 19 (130): 437. https://doi.org/10.1299/jsme1958.19.437.
Khalil, A. T., D. M. Manias, D. C. Kyritsis, and D. A. Goussis. 2021. “NO formation and autoignition dynamics during combustion of H2O-Diluted NH3/H2O2 mixtures with air.” Energies 14 (1): 84. https://doi.org/10.3390/en14010084.
Korres, D. M., D. Karonis, E. Lois, M. B. Linck, and A. K. Gupta. 2008. “Aviation fuel JP-5 and biodiesel on a diesel engine.” Fuel 87 (1): 70–78. https://doi.org/10.1016/j.fuel.2007.04.004.
Kosmadakis, G. M., D. C. Rakopoulos, and C. D. Rakopoulos. 2016. “Methane/hydrogen fueling a spark-ignition engine for studying NO, CO and HC emissions with a research CFD code.” Fuel 185 (Dec): 903–915. https://doi.org/10.1016/j.fuel.2016.08.040.
Kotsiopoulos, P. N., R. G. Papagiannakis, P. Tsakalou, I. Gazinou, and E. A. Yfantis. 2007. Experimental investigation concerning the effect of the use of biodiesel and F-34 (JP-8) aviation fuel on performance and emissions of a DI diesel engine. New York: SAE International.
Kouremenos, D. A., C. D. Rakopoulos, and D. T. Hountalas. 1988. “Thermodynamic analysis of divided combustion chamber diesel engine.” VDI Forschung Ing.-Wesens 54 (3): 73–81. https://doi.org/10.1007/BF02582095.
Kouremenos, D. A., C. D. Rakopoulos, and D. T. Hountalas. 1997. “Multi-zone combustion modelling for the prediction of pollutants emissions and performance of DI diesel engines.” Trans. SAE J. Engines 106: 940–957. https://doi.org/10.4271/970635.
Kouremenos, D. A., C. D. Rakopoulos, and E. Karvounis. 1987. “Thermodynamic analysis of direct injection diesel engines by multi-zone modeling.” Proc. AES 3 (3): 67–77.
Kouremenos, D. A., C. D. Rakopoulos, and E. A. Yfantis. 1992. “A FORTRAN program for calculating the evaporation rates in diesel engine fuel sprays.” Adv. Eng. Software 15 (1): 67–71. https://doi.org/10.1016/0965-9978(92)90045-H.
Krahl, J., A. Munack, M. Bahadir, L. Schumacher, and N. Elser. 1996. Review: Utilization of rapeseed oil, rapeseed methyl ester or diesel fuel: Exhaust gas emissions and estimation of environmental effects. New York: SAE International.
Labeckas, G., and S. Slavinskas. 2015. “Combustion phenomenon, performance and emissions of a diesel engine with aviation turbine JP-8 fuel and rapeseed biodiesel blends.” Energy Convers. Manage. 105 (Nov): 216–229. https://doi.org/10.1016/j.enconman.2015.07.065.
Labeckas, G., S. Slavinskas, and V. Vilutiene. 2015. “Effect of the cetane number improving additive on combustion, performance, and emissions of a DI diesel engine operating on JP-8 fuel.” J. Energy Eng. 141 (2): C4014005. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000222.
Lavoie, G. A., J. B. Heywood, and J. C. Keck. 1970. “Experimental and theoretical study of nitric oxide formation in internal combustion engines.” Combust. Sci. Technol. 1 (4): 313–326. https://doi.org/10.1080/00102206908952211.
Lee, D., Y. Jho, and C.-S. Lee. 2014. “Effects of soybean and canola oil–based biodiesel blends on spray, combustion, and emission characteristics in a diesel engine.” J. Energy Eng. 140 (3): A4014012. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000160.
Ma, F., and M. A. Hanna. 1999. “Biodiesel production: A review.” Bioresour. Technol. 70 (1): 1–15. https://doi.org/10.1016/S0960-8524(99)00025-5.
Manias, D. M., D. G. Patsatzis, D. C. Kyritsis, and D. A. Goussis. 2021. “NH3 vs. CH4 autoignition: A comparison of chemical dynamics.” Combust. Theor. Model. 25 (6): 1110–1131. https://doi.org/10.1080/13647830.2021.1890835.
Olikara, C., and G. Borman. 1975. A computer program for calculating properties of equilibrium combustion products with some applications to I.C. engines. New York: SAE International.
Papagiannakis, R. G., D. T. Hountalas, C. D. Rakopoulos, and D. C. Rakopoulos. 2008. Combustion and performance characteristics of a di diesel engine operating from low to high natural gas supplement ratios at various operating conditions. Warrendale, PA: Society of Automotive Engineers International.
Papagiannakis, R. G., P. N. Kotsiopoulos, D. T. Hountalas, and E. A. Yfantis. 2006. Single fuel research program comparative results of the use of JP-8 Aviation fuel versus diesel fuel on a direct injection and indirect injection diesel engine. New York: SAE International.
Papagiannakis, R. G., S. R. Krishnan, D. C. Rakopoulos, K. K. Srinivasan, and C. D. Rakopoulos. 2017. “A combined experimental and theoretical study of diesel fuel injection timing and gaseous fuel/diesel mass ratio effects on the performance and emissions of natural gas–diesel HDDI engine operating at various loads.” Fuel 202 (Aug): 675–687. https://doi.org/10.1016/j.fuel.2017.05.012.
Pariotis, E. G., T. C. Zannis, C. D. Rakopoulos, and D. T. Hountalas. 2020. “Comparative assessment of the impact of water addition either to the intake air or in diesel emulsion on the performance and emissions of a HDDI diesel engine.” J. Energy Eng. 146 (5): 04020051. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000697.
Rakopoulos, C. D., K. A. Antonopoulos, and D. C. Rakopoulos. 2006. “Multi-zone modeling of diesel engine fuel spray development with vegetable oil, biodiesel or diesel fuels.” Energy Convers. Manage. 47 (11–12): 1550–1573. https://doi.org/10.1016/j.enconman.2005.08.005.
Rakopoulos, C. D., K. A. Antonopoulos, and D. C. Rakopoulos. 2007. “Development and application of multi-zone model for combustion and pollutants formation in direct injection diesel engine running with vegetable oil or its biodiesel.” Energy Convers. Manage. 48 (7): 1881–1901. https://doi.org/10.1016/j.enconman.2007.01.026.
Rakopoulos, C. D., and E. G. Giakoumis. 1997. “Development of cumulative and availability rate balances in a multi-cylinder turbocharged indirect injection diesel engine.” Energy Convers. Manage. 38 (4): 347–369. https://doi.org/10.1016/S0196-8904(96)00055-6.
Rakopoulos, C. D., E. G. Giakoumis, D. T. Hountalas, and D. C. Rakopoulos. 2004a. The effect of various dynamic, thermodynamic and design parameters on the performance of a turbocharged diesel engine operating under transient load conditions. New York: SAE International.
Rakopoulos, C. D., and D. T. Hountalas. 1998. “Development and validation of a 3-D multi-zone combustion model for the prediction of a DI diesel engine performance and pollutant emissions.” Trans. SAE J. Engines 107: 1413–1429. https://doi.org/10.4271/981021.
Rakopoulos, C. D., and D. T. Hountalas. 1999. Combustion—Pollution of Reciprocating Internal Combustion Engines. Athens, Greece: Foundas Publications.
Rakopoulos, C. D., D. T. Hountalas, D. C. Rakopoulos, and Y. A. Levendis. 2004b. “Comparative environmental evaluation of JP-8 and diesel fuels burned in direct injection (DI) or indirect injection (IDI) diesel engines and in a laboratory furnace.” Energy Fuels 18 (5): 1302–1308. https://doi.org/10.1021/ef049931c.
Rakopoulos, C. D., D. T. Hountalas, G. N. Taklis, and E. I. Tzanos. 1995. “Analysis of combustion and pollutants formation in a direct injection diesel engine using a multi-zone model.” Int. J. Energy Res. 19 (1): 63–88. https://doi.org/10.1002/er.4440190109.
Rakopoulos, C. D., D. T. Hountalas, E. I. Tzanos, and G. N. Taklis. 1994. “A fast algorithm for calculating the composition of diesel combustion products using 11 species chemical equilibrium scheme.” Adv. Eng. Software 19 (2): 109–119. https://doi.org/10.1016/0965-9978(94)90064-7.
Rakopoulos, C. D., D. T. Hountalas, and T. C. Zannis. 2004c. Theoretical study concerning the effect of oxygenated fuels on DI diesel engine performance and emissions. New York: SAE International.
Rakopoulos, C. D., G. M. Kosmadakis, and E. G. Pariotis. 2010. “Investigation of piston bowl geometry and speed effects in a motored HSDI diesel engine using a CFD against a quasi-dimensional model.” Energy Convers. Manage. 51 (3): 470–484. https://doi.org/10.1016/j.enconman.2009.10.010.
Rakopoulos, C. D., and G. C. Mavropoulos. 2000. “Experimental instantaneous heat fluxes in the cylinder head and exhaust manifold of an air-cooled diesel engine.” Energy Convers. Manage. 41 (12): 1265–1281. https://doi.org/10.1016/S0196-8904(99)00179-X.
Rakopoulos, C. D., D. C. Rakopoulos, G. M. Kosmadakis, and R. G. Papagiannakis. 2019. “Experimental comparative assessment of butanol or ethanol diesel-fuel extenders impact on combustion features, cyclic irregularity, and regulated emissions balance in heavy-duty diesel engine.” Energy 174 (May): 1145–1157. https://doi.org/10.1016/j.energy.2019.03.063.
Rakopoulos, C. D., D. C. Rakopoulos, G. C. Mavropoulos, and G. M. Kosmadakis. 2018a. “Investigating the EGR rate and temperature impact on diesel engine combustion and emissions under various injection timings and loads by comprehensive two-zone modeling.” Energy 157 (Aug): 990–1014. https://doi.org/10.1016/j.energy.2018.05.178.
Rakopoulos, D. C. 2021. “Effects of exhaust gas recirculation under fueling rate or air/fuel ratio–controlled strategies on diesel engine performance and emissions by two-zone combustion modeling.” ASCE J. Energy Eng. 147 (1): 04020079. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000729.
Rakopoulos, D. C., C. D. Rakopoulos, and E. G. Giakoumis. 2015. “Impact of properties of vegetable oil, biodiesel, ethanol and n-butanol on the combustion and emissions of turbocharged HDDI diesel engine operating under steady and transient conditions.” Fuel 156 (Sep): 1–19. https://doi.org/10.1016/j.fuel.2015.04.021.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, and A. M. Dimaratos. 2012. “Characteristics of performance and emissions in high-speed direct injection diesel engine fueled with diethyl ether/diesel fuel blends.” Energy 43 (1): 214–224. https://doi.org/10.1016/j.energy.2012.04.039.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, A. M. Dimaratos, and E. C. Kakaras. 2014a. “Comparative evaluation of two straight vegetable oils and their methyl ester biodiesels as fuel extenders in HDDI diesel engines: Performance and emissions.” J. Energy Eng. 140 (3). https://doi.org/10.1061/(ASCE)EY.1943-7897.0000137.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, N. P. Komninos, G. M. Kosmadakis, and R. G. Papagiannakis. 2017. “Comparative evaluation of ethanol, n-butanol, and diethyl ether effects as biofuel supplements on combustion characteristics, cyclic variations, and emissions balance in light-duty diesel engine.” J. Energy Eng. 143 (2): 04016044. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000399.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, and G. M. Kosmadakis. 2021. “Numerical and experimental study by quasi-dimensional modeling of combustion and emissions in variable compression ratio high-speed spark-ignition engine.” ASCE J. Energy Eng. 147 (5): 04021032. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000780.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, and R. G. Papagiannakis. 2018b. “Evaluating oxygenated fuel’s influence on combustion and emissions in diesel engines using a two-zone combustion model.” J. Energy Eng. 144 (4): 04018046. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000556.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, R. G. Papagiannakis, and D. C. Kyritsis. 2014b. “Influence of properties of various common biofuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, biodiesel, ethanol, n-butanol, diethyl ether.” Energy 73 (Aug): 354–366. https://doi.org/10.1016/j.energy.2014.06.032.
Rakopoulos, D. C., C. D. Rakopoulos, G. M. Kosmadakis, and E. G. Giakoumis. 2020. “Exergy assessment of combustion and EGR and load effects in DI diesel engine using comprehensive two-zone modeling.” Energy 202 (Jul): 117685. https://doi.org/10.1016/j.energy.2020.117685.
Rakopoulos, D. C., C. D. Rakopoulos, and D. C. Kyritsis. 2016. “Butanol or DEE blends with either straight vegetable oil or biodiesel excluding fossil fuel: Comparative effects on diesel engine combustion attributes, cyclic variability and regulated emissions trade-off.” Energy 115 (Part 1): 314–325. https://doi.org/10.1016/j.energy.2016.09.022.
Ramos, J. I. 1989. Internal combustion engine modelling. New York: Hemisphere.
Stookey, D., S. Nemser, and J. Bowser. 2005. “Cutting NOx from diesel engines with membrane generated nitrogen enriched air.” https://www.energy.gov/sites/prod/files/2014/03/f9/2005_deer_bowser.pdf.
Tingas, E. A., H. G. Im, D. C. Kyritsis, and D. A. Goussis. 2018. “The use of CO2 as an additive for ignition delay and pollutant control in CH4/Air autoignition.” Fuel 211 (Jan): 898–905. https://doi.org/10.1016/j.fuel.2017.09.022.
Tingas, E.-A., D. C. Kyritsis, and D. A. Goussis. 2019. “H2/Air autoignition dynamics around the third explosion limit.” ASCE J. Energy Eng. 145 (1): 04018074. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000588.
Topal, M. H., J. Wang, Y. A. Levendis, J. B. Carlson, and J. Jordan. 2004. “PAH and other emissions from burning of JP-8 and diesel fuels in diffusion flames.” Fuel 83 (17–18): 2357–2368. https://doi.org/10.1016/j.fuel.2004.06.007.
US Army. 2001. US Army tank-automotive and armaments command research, JP-8—The single fuel forward, an information compendum. Warren, MI: Development, and Engineering Center.
Uyumaz, A., H. Solmaz, E. Yılmaz, H. Yamık, and S. Polat. 2014. “Experimental examination of the effects of military aviation fuel JP-8 and biodiesel fuel blends on the engine performance, exhaust emissions and combustion in a direct injection engine.” Fuel Process. Technol. 128 (Dec): 158–165. https://doi.org/10.1016/j.fuproc.2014.07.013.
Willis, D. A., W. E. Meyer, and C. Birnie. 1967. “Mapping of airflow patterns in engines with induction swirl.” Trans. SAE 75 (1): 416–426. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000697.
Yang, W., A. N. Al Khateeb, and D. C. Kyritsis. 2022. “A computational comparison of NH3/O2 and CH4/O2 non-premixed laminar flames.” Fuel 309 (Feb): 122200. https://doi.org/10.1016/j.fuel.2021.122200.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 148 • Issue 3 • June 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 13, 2021
Accepted: Dec 21, 2021
Published online: Mar 26, 2022
Published in print: Jun 1, 2022
Discussion open until: Aug 26, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.