Characteristics of Electric Energy Conversion in Pneumatic System Based on Piezoelectric Generator
Publication: Journal of Energy Engineering
Volume 147, Issue 2
Abstract
This paper reports the development of a high load-carrying capacity piezoelectric generator (PG) to harvest the great amount of compressed air energy wasted by the moving cylinder in a pneumatic system. The PG is designed to convert the pressure energy induced by compressed air into electrical energy. The coupling model of the piezoelectric patch is established under pressure motivation. The relationship between the output voltage and the piezoelectric patch deformation has been analyzed, and the output voltage is calculated through the simulation model. The simulation result demonstrates that the output voltage is when the load resistance is . The prototype generator consists of a chamber and a piezoelectric patch, which is sealed at the bottom. The prototype is installed in a real pneumatic system to test energy conversion performance, and it is driven by the compressed air that can be influenced by the moving piston. The energy exchange capacity of the proposed PG is analyzed by testing the output voltage and power generated under real working conditions. The test results show that the output voltage is increased when the moving distance decreases. The maximal output voltage and power are and 7.77 mW, respectively. The analysis of the testing results shows that the energy exchange capacity of the PG is highly relevant to the piston moving distance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This project is supported by the National Natural Science Foundation of China (No. 51775130).
References
Abdelkefi, A., M. Ghommem, A. O. Nuhait, and M. R. Hajj. 2014. “Nonlinear analysis and enhancement of wing-based piezoaeroelastic energy harvesters.” J. Sound Vib. 333 (1): 166–177. https://doi.org/10.1016/j.jsv.2013.08.032.
Alghisi, D., S. Dalola, M. Ferrari, and V. Ferrair. 2015. “Triaxial ball-impact piezoelectric converter for autonomous sensors exploiting energy harvesting from vibrations and human motion.” Sensor. Actuat. A-Phys. 233 (Sep): 569–581. https://doi.org/10.1016/j.sna.2015.07.020.
Chen, R. W., L. Ren, H. K. Xia, X. W. Yuan, and X. J. Liu. 2015. “Energy harvesting performance of a dandelion-like multi-directional piezoelectric vibration energy harvester.” Sensor. Actuat. A-Phys. 230 (Jul): 1–8. https://doi.org/10.1016/j.sna.2015.03.038.
Cheng, T. H., Y. T. Wang, F. Qin, Z. Y. Song, X. H. Lu, and G. Bao. 2016. “Piezoelectric energy harvesting in coupling-chamber excited by the vortex-induced pressure.” Appl. Phys. Lett. 109 (7): 073902. https://doi.org/10.1063/1.4961528.
Cook-Chennault, K. A., N. Thambi, and A. M. Sastry. 2008. “Powering MEMS portable devices-a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems.” Smart Mater. Struct. 17 (4): 043001. https://doi.org/10.1088/0964-1726/17/4/043001.
Cunefare, K. A., E. A. Skow, A. Erturk, J. Savor, N. Verma, and M. R. Cacan. 2013. “Energy harvesting from hydraulic pressure fluctuations.” Smart Mater. Struct. 22 (2): 025036. https://doi.org/10.1088/0964-1726/22/2/025036.
Deterre, M., E. Lefeuvre, and E. G. Dufour. 2012. “An active piezoelectric energy extraction method for pressure energy harvesting.” Smart Mater. Struct. 21 (8): 85004. https://doi.org/10.1088/0964-1726/21/8/085004.
Gao, X. T., W. H. Shih, and W. Y. Shih. 2013. “Flow energy harvesting using piezoelectric cantilevers with cylindrical extension.” IEEE Trans. Ind. Electron. 60 (3): 1116–1118. https://doi.org/10.1109/TIE.2012.2187413.
Guan, M., and W. H. Liao. 2016. “Design and analysis of a piezoelectric energy harvester for rotational motion system.” Energy Convers. Manage 111 (Mar): 239–244. https://doi.org/10.1016/j.enconman.2015.12.061.
Halim, M. A., and J. Y. Park. 2015. “Piezoceramic based wideband energy harvester using impact-enhanced dynamic magnifier for low frequency vibration.” Ceram. Int. 41 (S1): S702–S707. https://doi.org/10.1016/j.ceramint.2015.03.143.
Hu, G., K. T. Tse, and K. C. S. Kwok. 2016. “Enhanced performance of wind energy harvester by aerodynamic treatment of a square prism.” Appl. Phys. Lett. 108 (12): 123901. https://doi.org/10.1063/1.4944555.
Ibrahim, S. W., and W. G. Ali. 2012. “A review on frequency tuning methods for piezoelectric energy harvesting systems.” J. Renewable Sustainable Energy 4 (6): 062703. https://doi.org/10.1063/1.4766892.
Kan, J. W., D. L. Liu, S. Y. Wang, B. Wang, L. Yu, and S. J. Li. 2014. “A piezohydraulic vibration isolator used for energy harvesting.” J. Intel. Mater. Syst. Struct. 25 (14): 1727–1737. https://doi.org/10.1177/1045389X14521879.
Kan, J. W., J. H. Qiu, K. H. Tang, K. J. Zhu, and C. H. Shao. 2009. “Modeling and simulation of piezoelectric composite diaphragms for energy harvesting.” Int. J. Appl. Electromagnetics Mech. 30 (2): 95–106. https://doi.org/10.3233/JAE-2009-1039.
Khan, F., and Izhar. 2016. “Piezoelectric type acoustic energy harvester with a tapered Helmholtz cavity for improved performance.” J. Renewable Sustainable Energy 8 (5): 054701. https://doi.org/10.1063/1.4962027.
Kim, S., W. W. Clark, and Q. Wang. 2005. “Piezoelectric energy harvesting with a clamped circular plate: Analysis.” J. Intel. Mater. Syst. Struct. 16 (10): 847–854. https://doi.org/10.1177/1045389X05054044.
Kwon, S. D. 2010. “A T-shaped piezoelectric cantilever for fluid energy harvesting.” Appl. Phys. Lett. 97 (16): 164102. https://doi.org/10.1063/1.3503609.
Kwuimy, C. A. K., G. Litak, M. Borowiec, and C. Nataraj. 2012. “Performance of a piezoelectric energy harvester driven by air flow.” Appl. Phys. Lett. 100 (2): 024103. https://doi.org/10.1063/1.3676272.
Ma, Y. Z., Q. Ji, S. Chen, and G. B. Song. 2017. “An experimental study of ultra-low power wireless sensor-based autonomous energy harvesting system.” J. Renewable Sustainable Energy 9 (5): 054702. https://doi.org/10.1063/1.4997274.
Mo, C., J. Davidson, and W. W. Clark. 2014. “Energy harvesting with piezoelectric circular membrane under pressure loading.” Smart Mater. Struct. 23 (4): 45005. https://doi.org/10.1088/0964-1726/23/4/045005.
Mo, C., L. J. Radziemsk, and W. W. Clark. 2010. “Analysis of piezoelectric circular diaphragm energy harvesters for use in a pressure fluctuating system.” Smart Mater. Struct. 19 (2): 025016. https://doi.org/10.1088/0964-1726/19/2/025016.
Singh, B., and M. Y. Othman. 2009. “A review on photovoltaic thermal collectors.” J. Renewable Sustainable Energy 1 (6): 062702. https://doi.org/10.1063/1.3266963.
Toprak, A., and O. Tigli. 2014. “Piezoelectric energy harvesting: State-of-the-art and challenges.” Appl. Phys. Rev. 1 (3): 031104. https://doi.org/10.1063/1.4896166.
Wang, Y. T., L. Wang, T. H. Cheng, Z. Y. Song, and F. Qin. 2016. “Sealed piezoelectric energy harvester driven by hyperbaric air load.” Appl. Phys. Lett. 108 (3): 033902. https://doi.org/10.1063/1.4940199.
Weinstein, L. A., M. R. Cacan, P. M. So, and P. K. Wright. 2012. “Vortex shedding induced energy harvesting from piezoelectric materials in heating, ventilation and air conditioning flows.” Smart Mater. Struct. 21 (4): 045003. https://doi.org/10.1088/0964-1726/21/4/045003.
Yang, Y., Q. L. Shen, J. M. Jin, Y. P. Wang, W. J. Qian, and D. W. Yuan. 2014. “Rotational piezoelectric wind energy harvesting using impact-induced resonance.” Appl. Phys. Lett. 105 (5): 053901. https://doi.org/10.1063/1.4887481.
Yuan, M., Z. P. Cao, J. Luo, and Z. Q. Pang. 2018. “Helix structure for low frequency acoustic energy harvesting.” Rev. Sci. Instrum. 89 (5): 055002. https://doi.org/10.1063/1.5021526.
Zhang, Z. H., S. Y. Wang, J. W. Kan, W. J. Hu, Z. F. Chen, and H. L. Xu. 2020. “A pneumatic piezoelectric vibration energy harvester based on the compressed air-transducer-structure interaction.” Ener. Convers. Manage. 213 (Jun): 112861. https://doi.org/10.1016/j.enconman.2020.112861.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 11, 2020
Accepted: Nov 17, 2020
Published online: Jan 7, 2021
Published in print: Apr 1, 2021
Discussion open until: Jun 7, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.