Effects of Local Thermal Accumulation Conditions on the Thermal Characteristics of Lithium-Ion Batteries under High-Rate Charging
Publication: Journal of Energy Engineering
Volume 146, Issue 6
Abstract
Electric vehicles use lithium-ion batteries as their power source; however, many researchers have expressed concern about the safety of these batteries. In this study, a new method was used to establish an accurate model of a lithium-ion battery, which can be used to calculate the heat production of lithium-ion batteries and the change in lithium-ion concentration. The effect of local heat accumulation on the thermal characteristics of lithium-ion batteries was studied. The electrochemical heat generation and side-reaction heat generation of lithium-ion batteries under rates of 1C, 3C, and 5C were compared (C-rate is the measurement of the charge and discharge current with respect to its nominal capacity). The results show that adding the heat source during charging can reduce electrochemical heat generation but increase side-reaction heat generation. At the same time, adding heat will accelerate the precipitation of a lithium-ion battery, improving the overall temperature of the battery.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the study appear in the published article.
Acknowledgments
This work was supported by National Natural Science Foundation of China (No. 51875259); National Key Research and Development Program (No. 2018YFC0810504); and the Foundation of State Key Laboratory of Automotive Simulation and Control (No. 20180103).
References
Andreas, M., Z. Carlos, R. Magnus, and S. Hans. 2016. “Modeling and simulation of the thermal runaway behavior of cylindrical Li-ion cells—Computing of critical parameters.” Energies 9 (4): 292. https://doi.org/10.3390/en9040292.
Bao, Y., Y. Fan, Y. Chu, C. Ling, X. Tan, and S. Yang. 2019. “Experimental and numerical study on thermal and energy management of a fast-charging lithium-ion battery pack with air cooling.” J. Energy Eng. 145 (6): 04019030. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000631.
Etacheri, V., R. Marom, R. Elazari, G. Salitra, and D. Aurbach. 2011. “Challenges in the development of advanced Li-ion batteries: A review.” Energy Environ. Sci. 4 (9): 3243–3246. https://doi.org/10.1039/c1ee01598b.
Kim, G. H., A. Pesaran, and R. Spotnitz. 2007. “A three-dimensional thermal abuse model for lithium-ion cells.” J. Power Sources 170 (2): 476–489. https://doi.org/10.1016/j.jpowsour.2007.04.018.
Le, A. V., M. Wang, D. J. Noelle, Y. Shi, and Y. Qiao. 2017. “Mitigating thermal runaway of lithium-ion battery by using thermally sensitive polymer blend as cathode binder.” J. Appl. Polym. Sci. 135 (4): 45737. https://doi.org/10.1002/app.45737.
Panchal, S., I. Dincer, M. Agelin-Chaab, R. Fraser, and M. Fowler. 2015. “Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions.” Appl. Therm. Eng. 96 (Mar): 190–199. https://doi.org/10.1016/j.applthermaleng.2015.11.019.
Panchal, S., I. Dincer, M. Agelin-Chaab, R. Fraser, and M. Flower. 2016a. “Experimental investigation and simulation of temperature distributions in a battery during rapid discharge rates.” Heat Mass Transf. 53 (3): 937–946. https://doi.org/10.1007/s00231-016-1870-x.
Panchal, S., I. Dincer, M. Agelin-Chaab, R. Fraser, and M. Fowler. 2016b. “Experimental and theoretical investigation of temperature distributions in a prismatic lithium-ion battery.” Int. J. Therm. Sci. 99 (Jan): 204–212. https://doi.org/10.1016/j.ijthermalsci.2015.08.016.
Panchal, S., S. Mathewson, R. Fraser, R. Culham, and M. Fowler. 2017. Measurement of temperature gradient (dT/dy) and temperature response (dT/dt) of a prismatic lithium-ion pouch cell with cathode material. Amsterdam, Netherlands: Elsevier.
Parhizi, M., M. B. Ahmed, and A. Jain. 2017. “Determination of the core temperature of a Li-ion cell during thermal runaway.” J. Power Sources 370 (Dec): 27–35. https://doi.org/10.1016/j.jpowsour.2017.09.086.
Peng, P., and F. Jiang. 2015. “Thermal behavior analyses of stacked prismatic lithium-ion batteries during oven tests.” Int. J. Heat Mass Transf. 88 (Sep): 411–423.
Ping, P., Q. Wang, P. Huang, J. Sun, and C. Chen. 2014. “Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method.” Appl. Energy 129 (Sep): 261–273. https://doi.org/10.1016/j.apenergy.2014.04.092.
Shen, J., Y. Wang, G. Yu, and H. Li. 2020. “Thermal management of prismatic lithium-ion battery with minichannel cold plate.” J. Energy Eng. 146 (1): 04019033. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000621.
Shimomura, M., T. Mochizuki, and M. Takano. 2016. “Numerical analysis of high-performance lithium-ion and lead-acid batteries with capacity fade for an off-grid residential PV system.” J. Energy Eng. 142 (1): 04015006. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000264.
Tang, Z., X. Min, A. Song, and J. Cheng. 2019. “Thermal management of a cylindrical lithium-ion battery module using a multichannel wavy tube.” J. Energy Eng. 145 (1): 04018072. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000592.
Willard, N., W. He, C. Hendricks, and M. Pecht. 2013. “Lessons learned from the 787 dreamliner issue on lithium-ion battery reliability.” Energies 6 (9): 4682–4695. https://doi.org/10.3390/en6094682.
Xi, Y., Y. Feng, Y. Xiao, and G. He. 2020. “Novel z-shaped structure of lithium-ion battery packs and optimization for thermal management.” J. Energy Eng. 146 (1): 04019035. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000635.
Xu, X., J. Fu, H. Jiang, and R. He. 2017. “Research on the heat dissipation performance of lithium-ion cell with different operating conditions.” Int. J. Energy Res. 41 (11): 1642–1654. https://doi.org/10.1002/er.3682.
Zhao, R., J. Liu, and J. Gu. 2016. “Simulation and experimental study on lithium ion battery short circuit.” Appl. Energy 173 (Jul): 29–39. https://doi.org/10.1016/j.apenergy.2016.04.016.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 10, 2020
Accepted: Jun 24, 2020
Published online: Sep 23, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.