Design and Optimization of Ellipsoidal Windows for Concentrated Solar Irradiation
Publication: Journal of Energy Engineering
Volume 146, Issue 5
Abstract
This work presents a numerical study on transmission performance of ellipsoidal windows used in receivers under concentrated solar irradiation. The Monte Carlo ray tracing method is used to analyze the transmission of concentrated solar radiation through an ellipsoidal window. The effects of concentrator shape error (1–3 mrad) and geometry parameters of the window, including window height (30–60 mm), radius of concave region (20–55 mm), and shape factor (0–100 mm), on the transmittance are examined. It is found that the transmittance increases with the increase of shape factor and window height and the decrease of the slope error of the concentrator. The dependence of the transmittance on the radius of the concave region is nonmonotonic. To maximize window transmittance, a single-variable nonlinear optimizer is used to optimize the concave region radius. The results indicate that the transmittance can be increased by 1.7% at most by increasing the shape factor, within the parameter range. Only if the window height is greater than a certain critical value, could the transmittance of the ellipsoidal window be significantly higher than that of plane window. The critical value increases with the increasing slope error and decreasing shape factor, varying from 20 to 40 mm. The transmittance of the ellipsoidal window with optimal parameter can range up to 98.9%, which is 7.82% higher than that of flat window. The conclusions drawn from the present study could be useful for the design and application of ellipsoidal windows to reduce reflection losses of windowed receiver.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This work was supported by the project of National Natural Science Foundation of China (No. 51536001).
References
Acuna, A., N. Velazquez, D. Sauceda, and A. Aguilar. 2017. “Modeling, construction, and experimentation of a compound parabolic concentrator with a concentric tube as the absorber.” J. Energy Eng. 143 (3): 04016059. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000416.
Aichmayer, L., J. Garrido, and B. Laumert. 2018. “Scaling effects of a novel solar receiver for a micro gas-turbine based solar dish system.” Sol. Energy 162 (Mar): 248–264. https://doi.org/10.1016/j.solener.2018.01.020.
ASTM. 2012. Standard tables for reference solar spectral irradiances: Direct normal and hemispherical on 37° tilted surface. West Conshohocken, PA: ASTM.
Atif, M., and F. A. Al-Sulaiman. 2018. “Energy and exergy analyses of recompression brayton cycles integrated with a solar power tower through a two-tank thermal storage system.” J. Energy Eng. 144 (4): 04018036. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000545.
Ávila-Marín, A. L. 2011. “Volumetric receivers in solar thermal power plants with central receiver system technology: A review.” Sol. Energy 85 (5): 891–910. https://doi.org/10.1016/j.solener.2011.02.002.
Bader, R., A. Pedretti, M. Barbato, and A. Steinfeld. 2015. “An air-based corrugated cavity-receiver for solar parabolic trough concentrators.” Appl. Energy 138 (Jan): 337–345. https://doi.org/10.1016/j.apenergy.2014.10.050.
Buck, R., T. Bräuning, T. Denk, M. Pfänder, P. Schwarzbözl, and F. Tellez. 2001. “Solar-hybrid gas turbine-based power tower systems (REFOS)*.” J. Sol. Energy Eng. 124 (1): 2–9. https://doi.org/10.1115/1.1445444.
Cui, F., Y. He, Z. Cheng, and Y. Li. 2013. “Study on combined heat loss of a dish receiver with quartz glass cover.” Appl. Energy 112 (Dec): 690–696. https://doi.org/10.1016/j.apenergy.2013.01.007.
Cui, F. Q., Y. L. He, Z. D. Cheng, D. Li, and Y. B. Tao. 2012. “Numerical simulations of the solar transmission process for a pressurized volumetric receiver.” Energy 46 (1): 618–628. https://doi.org/10.1016/j.energy.2012.07.044.
Deubener, J., G. Helsch, A. Moiseev, and H. Bornhöft. 2009. “Glasses for solar energy conversion systems.” J. Eur. Ceram. Soc. 29 (7): 1203–1210. https://doi.org/10.1016/j.jeurceramsoc.2008.08.009.
Du, S., Y.-L. He, W.-W. Yang, and Z.-B. Liu. 2018. “Optimization method for the porous volumetric solar receiver coupling genetic algorithm and heat transfer analysis.” Int. J. Heat Mass Transf. 122 (Jul): 383–390. https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.120.
Fernández, P., F. Miller, M. McDowell, and A. Hunt. 2014. “Design space exploration of a 5 MWth small particle solar receiver.” Energy Procedia 49: 344–353. https://doi.org/10.1016/j.egypro.2014.03.037.
Heller, P. 1991. “Optimization of windows for closed receivers and receiver-reactors: Enhancement of optical-performance.” Sol. Energy Mater. 24 (1–4): 720–724. https://doi.org/10.1016/0165-1633(91)90104-S.
Heller, P., M. Pfänder, T. Denk, F. Tellez, A. Valverde, J. Fernandez, and A. Ring. 2006. “Test and evaluation of a solar powered gas turbine system.” Sol. Energy 80 (10): 1225–1230. https://doi.org/10.1016/j.solener.2005.04.020.
Hertel, J., R. Uhlig, M. Söhn, C. Schenk, G. Helsch, and H. Bornhöft. 2016. “Fused silica windows for solar receiver applications.” In Vol. 1734 of Proc., AIP Conf. College Park, MD: American Institute of Physics Publishing.
Howell, J. R., R. Siegel, and M. P. Mengüç. 2010. Thermal radiation heat transfer. New York: CRC Press.
Johnston, G. 1995. “On the analysis of surface error distributions on concentrated solar collectors.” J. Sol. Energy Eng. 117 (4): 294–296. https://doi.org/10.1115/1.2847843.
Khashan, M. A., and A. Y. Nassif. 2001. “Dispersion of the optical constants of quartz and polymethyl methacrylate glasses in a wide spectral range: 0.2–3 μm.” Opt. Commun. 188 (1): 129–139. https://doi.org/10.1016/S0030-4018(00)01152-4.
Lovegrove, K., and A. Luzzi. 1996. “Endothermic reactors for an ammonia based thermochemical solar energy storage and transport system.” Sol. Energy 56 (4): 361–371. https://doi.org/10.1016/0038-092X(96)00291-5.
Malitson, I. H. 1965. “Interspecimen comparison of the refractive index of fused silica.” J. Opt. Soc. Am. 55 (10): 1205–1209. https://doi.org/10.1364/JOSA.55.001205.
MATLAB. 2019. “MATLAB documentation.” Accessed June 17, 2019. https://www.mathworks.com/help/.
Meng, X.-L., X.-L. Xia, S.-D. Zhang, N. Sellami, and T. Mallick. 2016. “Coupled heat transfer performance of a high temperature cup shaped porous absorber.” Energy Convers. Manage. 110 (Feb): 327–337. https://doi.org/10.1016/j.enconman.2015.12.034.
Miller, F. J., A. J. Hunt, and and Asme. 2012. Developing the small particle heat exchange receiver fora prototype test. New York: ASME.
Modest, M. F. 2003. Radiative heat transfer. San Diego: Academic Press.
Okonkwo, E. C., M. Abid, and T. A. H. Ratlamwala. 2019. “Comparative study of heat transfer enhancement in parabolic trough collector based on modified absorber geometry.” J. Energy Eng. 145 (3): 04019007. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000602.
Pritzkow, W. E. C. 1991. “Pressure loaded volumetric ceramic receiver.” Sol. Energy Mater. 24 (1–4): 498–507. https://doi.org/10.1016/0165-1633(91)90086-Z.
Röger, M., M. Pfänder, and R. Buck. 2006. “Multiple air-jet window cooling for high-temperature pressurized volumetric receivers: Testing, evaluation, and modeling.” J. Sol. Energy Eng. 128 (3): 265–274. https://doi.org/10.1115/1.2212437.
Röger, M., C. Rickers, R. Uhlig, F. Neumann, and C. Polenzky. 2009. “Infrared-reflective coating on fused silica for a solar high-temperature receiver.” J. Sol. Energy Eng. 131 (2): 7. https://doi.org/10.1115/1.3097270.
Sedighi, M., R. V. Padilla, R. A. Taylor, M. Lake, I. Izadgoshasb, and A. Rose. 2019. “High-temperature, point-focus, pressurised gas-phase solar receivers: A comprehensive review.” Energy Convers. Manage. 185 (Apr): 678–717. https://doi.org/10.1016/j.enconman.2019.02.020.
Shuai, Y., F.-Q. Wang, X.-L. Xia, H.-P. Tan, and Y.-C. Liang. 2011. “Radiative properties of a solar cavity receiver/reactor with quartz window.” Int. J. Hydrogen Energy 36 (19): 12148–12158. https://doi.org/10.1016/j.ijhydene.2011.07.013.
Soo Too, Y. C., M. Diago López, H. Cassard, G. Duffy, R. Benito, and R. Navio. 2017. “Thermal performance and operation of a solar tubular receiver with as the heat transfer fluid.” J. Sol. Energy Eng. 139 (4): 041004-1–041004-9. https://doi.org/10.1115/1.4036414.
Tariq, R., N. A. Sheikh, J. Xaman, and A. Bassam. 2019. “Recovering waste energy in an indirect evaporative cooler—A case for combined space air conditioning for human occupants and produce commodities.” Build. Environ. 152 (Apr): 105–121. https://doi.org/10.1016/j.buildenv.2019.01.038.
Tariq, R., C. Zhan, N. A. Sheikh, and X. Zhao. 2018b. “Thermal performance enhancement of a cross-flow-type maisotsenko heat and mass exchanger using various nanofluids.” Energies 11 (10): 2656. https://doi.org/10.3390/en11102656.
Tariq, R., C. Zhan, X. Zhao, and N. A. Sheikh. 2018a. “Numerical study of a regenerative counter flow evaporative cooler using alumina nanoparticles in wet channel.” Energy Build. 169 (Jun): 430–443. https://doi.org/10.1016/j.enbuild.2018.03.086.
Uhlig, R., and M. Röger. 2004. “Development of a window cooling for high temperature solar receivers.” In Proc., Cadfem Users Meeting—Int. Congress on Fem-technology and the Ansys Cfx and Icem Cfd Conf. Dresden, Germany: DLR.
Ulmer, S., W. Reinalter, P. Heller, E. Lupfert, and D. Martinez. 2002. “Beam characterization and improvement with a flux mapping system for dish concentrators.” J. Sol. Energy Eng. Trans.-ASME 124 (2): 182–188. https://doi.org/10.1115/1.1464881.
Wörner, A., and R. Tamme. 1998. “ reforming of methane in a solar driven volumetric receiver–reactor.” Catal. Today 46 (2): 165–174. https://doi.org/10.1016/S0920-5861(98)00338-1.
Xia, X.-L., G.-L. Dai, and Y. Shuai. 2012. “Experimental and numerical investigation on solar concentrating characteristics of a sixteen-dish concentrator.” Int. J. Hydrogen Energy 37 (24): 18694–18703. https://doi.org/10.1016/j.ijhydene.2012.09.115.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 146 • Issue 5 • October 2020
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Sep 3, 2019
Accepted: Apr 23, 2020
Published online: Jul 7, 2020
Published in print: Oct 1, 2020
Discussion open until: Dec 7, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.