Experimental Research on Cold Start of PFI Two-Stroke Spark-Ignition Kerosene Engine
Publication: Journal of Energy Engineering
Volume 146, Issue 4
Abstract
To overcome the difficulty of cold start of a spark-ignition (SI) engine fueled with aviation kerosene, a series of experimental investigations were carried out on a port fuel injection (PFI) two-stroke engine. First, the effects of several auxiliary preheating methods, including kerosene fuel preheating, intake manifold preheating, crankcase preheating, and cylinder head preheating, were studied. Then, based on the physical and chemical properties of kerosene fuel, an optimized fuel injection and ignition control strategy was proposed. The results showed that fuel preheating and intake manifold preheating cannot ensure successful engine start. Compared with crankcase preheating, cylinder preheating is more effective for engine cold start. The optimized fuel injection and ignition strategy not only reduces the required temperature for preheating but also improves the dynamic performance of the engine cold start conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was supported by Funding of the Jiangsu Innovation Program for Graduate Education (Grant No. KYLX15_0262) from the Fundamental Research Funds for the Central Universities.
References
Austin, R. 2010. “Unmanned aircraft systems: UAVs design, development, and deployment.” 79 (50): 31–36. Hoboken, NJ: John Wiley & Sons. https://doi.org/10.1002/9780470664797.ch27.
Beduneau, J.-L., B. Kim, L. Zimmer, and Y. Ikeda. 2003. “Measurements of minimum ignition energy in premixed laminar methane/air flow by using laser induced spark.” Combust. Flame 132 (4): 653–665. https://doi.org/10.1016/S0010-2180(02)00536-9.
Cárdenas, M. D., A. Gómez, and O. Armas. 2016. “Pollutant emissions from starting a common rail diesel engine fueled with different biodiesel fuels.” J. Energy Eng. 142 (2): e4015012. https://doi.org/10.1061/(asce)ey.1943-7897.0000328.
Cathcart, G., G. Dickson, and S. Ahern. 2005. The application of air-assist direct injection for spark-ignited heavy fuel 2-stroke and 4-stroke engines. SAE Technical Paper 2005-32-0065. Warrendale, PA: Society of Automotive Engineers.
Chen, Z., M. P. Burke, and Y. Ju. 2009. “Effects of Lewis number and ignition energy on the determination of laminar flame speed using propagating spherical flames.” Proc. Combust. Inst. 32 (1): 1253–1260. https://doi.org/10.1016/j.proci.2008.05.060.
Chen, Z., M. P. Burke, and Y. Ju. 2011. “On the critical flame radius and minimum ignition energy for spherical flame initiation.” Proc. Combust. Inst. 33 (1): 1219–1226. https://doi.org/10.1016/j.proci.2010.05.005.
Duddy, B., J. Lee, M. Walluk, and D. Hallbach. 2011. Conversion of a spark-ignited aircraft engine to JP-8 heavy fuel for use in unmanned aerial vehicles. SAE Technical Paper 2011-01-0145. Warrendale, PA: Society of Automotive Engineers.
Dutczak, J. 2015. “Heavy fuel engines.” Combust. Engines 163 (4): 34–46.
Groenewegen, J. R., P. Litke, C. Wilson, S. Sidhu, and J. Hoke. 2011a. “The performance and emissions effects of utilizing heavy fuels and biodiesel in a small spark ignition internal combustion engine.” In Proc., 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Reston, VA: American Institute of Aeronautics and Astronautics (AIAA). https://doi.org/10.2514/6.2011-695.
Groenewegen, J. R., S. Sidhu, J. Hoke, C. Wilson, and P. Litke. 2011b. “The performance and emissions effects of utilizing heavy fuels and algae based biodiesel in a port-fuel-injected small spark ignition internal combustion engine.” In Proc., 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conf. & Exhibit. Reston, VA: American Institute of Aeronautics and Astronautics (AIAA). https://doi.org/10.2514/6.2011-5807.
Hooper, P. 2001. “Initial development of a multi-fuel stepped piston engine for unmanned aircraft application.” Aircr. Eng. Aerosp. Technol. 73 (5): 459–465. https://doi.org/10.1108/00022660110403005.
Hooper, P. 2017a. “Experimental experience of cold starting a spark ignition UAV engine using low volatility fuel.” Aircr. Eng. Aerosp. Technol. 89 (1): 106–111. https://doi.org/10.1108/AEAT-09-2014-0137.
Hooper, P. 2017b. Low volatility fuel cold start experience with a stepped piston UAV engine to address single fuel objectives. SAE Technical Paper 2017-01-9283. Warrendale, PA: Society of Automotive Engineers.
Kousoulidou, M., A. Dimaratos, A. Karvountzis-Kontakiotis, and Z. Samaras. 2014. “Combustion and emissions of a common-rail diesel engine fueled with HWCO.” J. Energy Eng. 140 (3): A4013001. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000154.
Li, J., C. Gong, Y. Su, H. Dou, and X. Liu. 2009. “Effect of preheating on firing behavior of a spark-ignition methanol-fueled engine during cold start.” Energy Fuels. 23 (11): 5394–5400. https://doi.org/10.1021/ef900569a.
Liu, R., M. Wei, C. Wang, and T. Huang. 2019. “Fuel flow control for starting a crankcase-injected two-stroke spark ignition engine fueled with kerosene (RP-3).” J. Energy Eng. 145 (4): 04019010. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000607.
Liu, R., M. Wei, and H. Yang. 2016. “Cold start control strategy for a two-stroke spark ignition diesel-fuelled engine with air-assisted direct injection.” Appl. Therm. Eng. 108 (Sep): 414–426. https://doi.org/10.1016/j.applthermaleng.2016.07.148.
Ma, H., M. Xie, W. Zeng, and B. Chen. 2015. “Influencing factor analysis for ignition characteristics of RP-3 kerosene.” J. Propul. Technol. 36 (2): 306–313. https://doi.org/10.13675/j.cnki.tjjs.2015.02.020.
Singh, R., and R. McChesney. 2004. Development of multi-fuel spark ignition engine. SAE Paper 2004-32-0038. Warrendale, PA: Society of Automotive Engineers.
Suhy, P. J., L. W. Evers, E. J. Morgan, and J. E. Wank. 1991. The feasibility of a kerosene-fueled spark ignited two-stroke engine. SAE Technical Paper 911846. Warrendale, PA: Society of Automotive Engineers.
Zhan, Z., C. Yuan, Z. Hu, H. Wang, P. C. Sui, N. Djilali, and M. Pan. 2018. “Experimental study on different preheating methods for the cold-start of PEMFC stacks.” Energy 162 (Nov): 1029–1040. https://doi.org/10.1016/j.energy.2018.08.003.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 19, 2019
Accepted: Mar 13, 2020
Published online: May 29, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.