Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications
Publication: Journal of Energy Engineering
Volume 146, Issue 4
Abstract
This investigation is focused on assessing the thermal performance of a ventilated double-glass reversible window with reflective film for building applications. The window is composed of two glass sheets separated by a gap forming a channel. One glass sheet faces the external environment while the second glass sheet faces the internal environment. A solar reflective film is attached on the internal surface of the first glass sheet for hot climates or attached on the internal surface of the second glass sheet for cold climates. A home-built numerical code is developed, using the finite volume method for the discretization of conservative equations, and validated against available numerical and experimental results. The simulations were done hourly for representative days of the summer and winter seasons. Three possibilities were examined in this study: a ventilated double-glass window without a reflective film, a ventilated double-glass window with a reflective film for hot climates, and a ventilated double-glass window with a reflective film for cold climates. Based on the results, for the hot climates, the use of a reflective film is highly recommended because the ventilated double-glass window with a reflective film was able to reduce 57% of the energy gain in comparison with the same window without a reflective film. For cold climates, the ventilated double-glass window without a film is better than the same window with a reflective film.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request, such as the following: figures, models, and flowcharts of the numerical codes.
Acknowledgments
The authors wish to thank the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) for the doctoral scholarship to the first author and the PQ Research Grant 304372/2016-1 for the second author.
References
3M. 2017. “3M company.” Accessed December 8, 2017. http://gpwindowfilm.com.
Aguilar, J. O., J. Xaman, G. Álvarez, I. Hernández-Pérez, and C. López-Mata. 2015. “Thermal performance of a double pane window using glazing available on the Mexican market.” Renewable Energy 81 (Sep): 785–794. https://doi.org/10.1016/j.renene.2015.03.063.
Aguilar, J. O., J. Xamán, Y. Olazo-Gómez, I. Hernández-López, G. Becerra, and O. A. Jaramillo. 2017. “Thermal performance of a room with a double glazing window using glazing available in Mexican market.” Appl. Therm. Eng. 119 (Jun): 505–515. https://doi.org/10.1016/j.applthermaleng.2017.03.083.
Akiyama, M., and Q. P. Chong. 1997. “Numerical analysis of natural convection with surface radiation in a square enclosure.” Numer. Heat Transfer, Part A: Appl. 32 (4): 419. https://doi.org/10.1080/10407789708913899.
Arıcı, M., and H. Karabay. 2010. “Determination of optimum thickness of double-glazed windows for the climatic regions of Turkey.” Energy Build. 42 (10): 1773–1778. https://doi.org/10.1016/j.enbuild.2010.05.013.
ASHRAE (American Society of Heating, Refrigerating, and Air Conditioning Engineers). 2001. “Fenestration.” Chap. 27 in Handbook of fundamentals. Atlanta: ASHRAE.
Aydin, O. 2000. “Determination of optimum air-layer thickness in double-pane windows.” Energy Build. 32 (3): 303–308. https://doi.org/10.1016/S0378-7788(00)00057-8.
Aydın, O. 2006. “Conjugate heat transfer analysis of double pane windows.” Build. Environ. 41 (2): 109–116. https://doi.org/10.1016/j.buildenv.2005.01.011.
Biswas, K., and R. Abhari. 2014. “Low-cost phase change material as an energy storage medium in building envelopes: Experimental and numerical analyses.” Energy Convers. Manage. 88 (Dec): 1020–1031. https://doi.org/10.1016/j.enconman.2014.09.003.
Carlos, J. S. 2017. “Optimizing the ventilated double window for solar collection.” Sol. Energy. 150 (Jul): 454–462. https://doi.org/10.1016/j.solener.2017.04.063.
Carlos, J. S., H. Corvacho, P. D. Silva, and J. P. Castro-Gomes. 2010. “Real climate experimental study of two double window systems with preheating of ventilation air.” Energy Build. 42 (6): 928–934. https://doi.org/10.1016/j.enbuild.2010.01.003.
Carlos, J. S., H. Corvacho, P. D. Silva, and J. P. Castro-Gomes. 2011. “Modelling and simulation of a ventilated double window.” Appl. Therm. Eng. 31 (1): 93–102. https://doi.org/10.1016/j.applthermaleng.2010.08.021.
CEPAGRI (Centro de Pesquisas Meteorológicas e Climáticas Aplicadas à Agricultura). 2017. “Center for meteorological and climatic research applied to agriculture.” Accessed December 8, 2017. https://www.cpa.unicamp.br.
Chow, T., C. Li, and Z. Lin. 2011. “Thermal characteristics of water-flow double-pane window.” Int. J. Therm. Sci. 50 (2): 140–148. https://doi.org/10.1016/j.ijthermalsci.2010.10.006.
Chow, T., Z. Lin, K. Fong, L. Chan, and M. He. 2009. “Thermal performance of natural airflow window in subtropical and temperate climate zones: A comparative study.” Energy Convers. Manage. 50 (8): 1884–1890. https://doi.org/10.1016/j.enconman.2009.04.028.
Chow, T. T., Z. Lin, W. He, A. L. S. Chan, and K. F. Fong. 2006. “Use of ventilated solar screen window in warm climate.” Appl. Therm. Eng. 26 (16): 1910–1918. https://doi.org/10.1016/j.applthermaleng.2006.01.026.
El-Sadi, H., F. Haghighat, and A. Fallahi. 2010. “CFD analysis of turbulent natural ventilation in double-skin façade: Thermal mass and energy efficiency.” J. Energy Eng. 136 (3): 68–75. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000026.
Erell, E., Y. Etzion, N. Carlstrom, M. Sandberg, J. Molina, I. Maestre, E. Maldonado, V. Leal, and O. Gutschker. 2004. “‘SOLVENT’: Development of a reversible solar-screen glazing system.” Energy Build. 36 (5): 467–480. https://doi.org/10.1016/j.enbuild.2004.01.042.
Etzion, Y., and E. Erell. 2000. “Controlling the transmission of radiant energy through windows: A novel ventilated reversible glazing system.” Build. Environ. 35 (5): 433–444. https://doi.org/10.1016/S0360-1323(99)00039-6.
Feuermann, D., and A. Novoplansky. 1998. “Reversible low solar heat gain windows for energy savings.” Sol. Energy 62 (3): 169–175. https://doi.org/10.1016/S0038-092X(98)00015-2.
Gan, G. 2001. “Thermal transmittance of multiple glazing: Computational fluid dynamics prediction.” Appl. Therm. Eng. 21 (15): 1583–1592. https://doi.org/10.1016/S1359-4311(01)00016-3.
Gijón-Rivera, M., G. Álvarez, I. Beausoleil-Morrison, and J. Xamán. 2011. “Appraisal of thermal performance of a glazed office with a solar control coating: Cases in Mexico and Canada.” Build. Environ. 46 (5): 1223–1233. https://doi.org/10.1016/j.buildenv.2010.11.007.
Goia, F., M. Perino, and M. Haase. 2012. “A numerical model to evaluate the thermal behaviour of PCM glazing system configurations.” Energy Build. 54 (Nov): 141–153. https://doi.org/10.1016/j.enbuild.2012.07.036.
González-Julián, E., J. Xamán, N. O. Moraga, Y. Chávez, I. Zavala-Guillén, and E. Simá. 2018. “Annual thermal evaluation of a double pane window using glazing available in the Mexican market.” Appl. Therm. Eng. 143 (Oct): 100–111. https://doi.org/10.1016/j.applthermaleng.2018.07.053.
Gueymard, C. A., and W. C. duPont. 2009. “Spectral effects on the transmittance, solar heat gain, and performance rating of glazing systems.” Sol. Energy 83 (6): 940–953. https://doi.org/10.1016/j.solener.2008.12.012.
Gugliermetti, F., and F. Bisegna. 2007. “Saving energy in residential buildings: The use of fully reversible windows.” Energy 32 (7): 1235–1247. https://doi.org/10.1016/j.energy.2006.08.004.
Ihara, T., S. Grynning, T. Gao, A. Gustavsen, and B. P. Jelle. 2015. “Impact of convection on thermal performance of aerogel granulate glazing systems.” Energy Build. 88 (Feb): 165–173. https://doi.org/10.1016/j.enbuild.2014.12.001.
Ismail, K. A. R., and J. R. Henríquez. 2002. “Parametric study on composite and PCM glass systems.” Energy Convers. Manage. 43 (7): 973–993. https://doi.org/10.1016/S0196-8904(01)00083-8.
Ismail, K. A. R., and J. R. Henríquez. 2005. “Two-dimensional model for the double glass naturally ventilated window.” Int. J. Heat Mass Transfer. 48 (3): 461–475. https://doi.org/10.1016/j.ijheatmasstransfer.2004.09.022.
Ismail, K. A. R., and J. R. Henríquez. 2006. “Simplified model for a ventilated glass window under forced air flow conditions.” Appl. Therm. Eng. 26 (2): 295–302. https://doi.org/10.1016/j.applthermaleng.2005.04.023.
Ismail, K. A. R., C. T. Salinas, and J. R. Henriquez. 2008. “Comparison between PCM filled glass windows and absorbing gas filled windows.” Energy Build. 40 (5): 710–719. https://doi.org/10.1016/j.enbuild.2007.05.005.
ISO. 1998. Ergonomic requirements for office work with visual display terminals (VDTs). 5: Workstation layout and postural requirements. ISO 9241-5. Geneva: ISO.
ISO. 2000. Thermal performance of windows, doors and shutters, calculation of thermal transmittance. 2: Numerical method for frames. ISO 10077-2. Brussels, Belgium: CEN.
Karabay, H., and M. Arıcı. 2012. “Multiple pane window applications in various climatic regions of Turkey.” Energy Build. 45 (Feb): 67–71. https://doi.org/10.1016/j.enbuild.2011.10.020.
Lago, T. G. S., K. A. R. Ismail, and F. A. M. Lino. 2019. “Ventilated double glass window with reflective film: Modeling and assessment of performance.” Sol. Energy 185 (Jun): 72–88. https://doi.org/10.1016/j.solener.2019.04.047.
Li, C., J. Tan, T. Chow, and Z. Qiu. 2015. “Experimental and theoretical study on the effect of window films on building energy consumption.” Energy Build. 102 (Sep): 129–138. https://doi.org/10.1016/j.enbuild.2015.04.025.
Li, D., T. Ma, C. Liu, Y. Zheng, Z. Wang, and X. Liu. 2016. “Thermal performance of a PCM-filled double glazing unit with different optical properties of phase change material.” Energy Build. 119 (May): 143–152. https://doi.org/10.1016/j.enbuild.2016.03.036.
Liu, C., Y. Wu, D. Li, Y. Zhou, Z. Wang, and X. Liu. 2017. “Effect of PCM thickness and melting temperature on thermal performance of double glazing units.” J. Build. Eng. 11 (May): 87–95. https://doi.org/10.1016/j.jobe.2017.04.005.
Liu, C., Y. Zhou, D. Li, F. Meng, Y. Zheng, and X. Liu. 2016. “Numerical analysis on thermal performance of a PCM-filled double glazing roof.” Energy Build. 125 (Aug): 267–275. https://doi.org/10.1016/j.enbuild.2016.05.002.
Nikoofard, S., V. I. Ugursal, and I. Beausoleil-Morrison. 2014. “Technoeconomic assessment of the impact of window improvements on the heating and cooling energy requirement and greenhouse gas emissions of the Canadian housing stock.” J. Energy Eng. 140 (2): 04013018. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000140.
Noh-Pat, F., M. Gijón-Rivera, J. Xamán, I. Zavala-Guillén, J. O. Aguilar, and M. Rodríguez-Pérez. 2019. “Modelling of an energy-efficient open double glazing unit for the main climatic conditions of Mexico.” Indoor Built Environ. 1–19. https://doi.org/10.1177/1420326X19862601.
Noh-Pat, F., J. Xamán, G. Álvarez, Y. Chávez, and J. Arce. 2011. “Thermal analysis for a double glazing unit with and without a solar control film (SnS-CuxS) for using in hot climates.” Energy Build. 43 (2–3): 704–712. https://doi.org/10.1016/j.enbuild.2010.11.015.
Patankar, S. 1980. Numerical heat transfer and fluid flow. Washington, DC: Hemisphere.
Siegel, R., J. Howell, and M. Pinar. 2015. Thermal radiation heat transfer. New York: CRC Press.
Söylemez, M. S. 2009. “Thermoeconomical optimization of number of panes for windows.” J. Energy Eng. 135 (1): 21–24. https://doi.org/10.1061/(ASCE)0733-9402(2009)135:1(21).
Threlkeld, L. 1970. Thermal environmental engineering. Upper Saddle River, NJ: Prentice-Hall.
Xamán, J., C. Jiménez-Xamán, G. Álvarez, I. Zavala-Guillén, I. Hernández-Pérez, and J. O. Aguilar. 2016a. “Thermal performance of a double pane window with a solar control coating for warm climate of Mexico.” Appl. Therm. Eng. 106 (Aug): 257–265. https://doi.org/10.1016/j.applthermaleng.2016.06.011.
Xamán, J., Y. Olazo-Gómez, Y. Chávez, J. F. Hinojosa, I. Hernández-Pérez, I. Hernández-López, and I. Zavala-Guillén. 2016b. “Computational fluid dynamics for thermal evaluation of a room with a double glazing window with a solar control film.” Renewable Energy 94 (Aug): 237–250. https://doi.org/10.1016/j.renene.2016.03.055.
Xamán, J., Y. Olazo-Gómez, I. Zavala-Guillén, I. Hernández-Pérez, J. O. Aguilar, and J. F. Hinojosa. 2017. “Thermal evaluation of a room coupled with a double glazing window with/without a solar control film for Mexico.” Appl. Therm. Eng. 110 (Jan): 805–820. https://doi.org/10.1016/j.applthermaleng.2016.08.156.
Xamán, J., C. Pérez-Nucamendi, J. Arce, J. Hinojosa, G. Álvarez, and I. Zavala-Guillén. 2014. “Thermal analysis for a double pane window with a solar control film for using in cold and warm climates.” Energy Build. 76 (Jun): 429–439. https://doi.org/10.1016/j.enbuild.2014.03.015.
Zevenhoven, R., M. Fält, and L. P. Gomes. 2014. “Thermal radiation heat transfer: Including wavelength dependence into modelling.” Int. J. Therm. Sci. 86 (Dec): 189–197. https://doi.org/10.1016/j.ijthermalsci.2014.07.003.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 146 • Issue 4 • August 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 26, 2019
Accepted: Mar 4, 2020
Published online: Jun 3, 2020
Published in print: Aug 1, 2020
Discussion open until: Nov 3, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.