Three-Dimensional Thermal Stress Distribution of Opposed Firing Boiler: Numerical Study and Experimental Verification
Publication: Journal of Energy Engineering
Volume 146, Issue 2
Abstract
By coupling fluid dynamics and solid mechanics, a numerical framework has been developed to investigate the temperature distribution and stress field on the boiler walls and to propose useful advice on reducing the thermal stress and improving the mechanical reliability. Simulation of a laboratory scale, gas fuel opposed firing boiler has been conducted, including the combustion and heat transfer process, as well as the thermal stress distribution by finite-element analysis. The results have been verified by a previous parallel experiment. The results show that heat load and the symmetry of flame can obviously affect the mean temperature of the boiler. In the upper furnace, the amount of fuel is the major factor affecting temperature profile, while the temperature in the burner zone is mainly determined by the distribution of the flame. The temperature is extremely high (about 520 K) at the wall connections. Stress distribution is of great relevance to temperature and asymmetric combustion, which causes extremely strong stress (more than 630 kPa). The study is of great significance for providing guidance for the design, manufacture, installation, and operation of boilers.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This work is supported by the National Key Research and Development Program of China (Nos. 2018YFF0216005 and 2016YFC0801904) and the Fundamental Research Funds for the Central Universities at Xi’an Jiaotong University.
References
Adamczyk, W. P., S. Werle, and A. Ryfa. 2014. “Application of the computational method for predicting NOx reduction within large scale coal-fired boiler.” Appl. Therm. Eng. 73 (1): 343–350. https://doi.org/10.1016/j.applthermaleng.2014.07.045.
Bergant, M. A., A. A. Yawny, and J. E. P. Ipina. 2015. “Structural integrity assessments of steam generator tubes using the FAD methodology.” Nucl. Eng. Des. 295 (Dec): 457–467. https://doi.org/10.1016/j.nucengdes.2015.09.022.
Cirimele, G., and M. D’Elia. 2011. Heat flux: Processes, measurement techniques and applications. Hauppauge, NY: Nova Science Publishers.
Citirik, E. 2012. “Three-dimensional fracture analysis of circumferentially cracked boiler tubes.” J. Pressure Vessel Technol. ASME 134 (3): 031202. https://doi.org/10.1115/1.4005857.
Drosatos, P., S. Muhič, D. Rakopoulos, A. Gypakis, D. Papas, N. Nikolopoulos, and E. Kakaras. 2017. “Numerical investigation of a coal-fired power plant main furnace under normal and reduced-oxygen operating conditions.” J. Energy Eng. 143 (5): 04017050. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000480.
Duarte, C. A., E. Espejo, and J. Carlos Martinez. 2017. “Failure analysis of the wall tubes of a water-tube boiler.” Eng. Fail. Anal. 79 (Sep): 704–713. https://doi.org/10.1016/j.engfailanal.2017.05.032.
Fu, J., L. Wei, N. Li, Q. Zhou, and T. Liu. 2017. “Experimental study on temperature, heat flux, strain and stress distribution of boiler water walls.” Appl. Therm. Eng. 113 (Feb): 419–425. https://doi.org/10.1016/j.applthermaleng.2016.11.039.
Hart, J., A. A. Bhuiyan, and J. Naser. 2018. “Aerodynamics of burner jet in a tangentially-fired boiler: A CFD modelling and experiment.” Int. J. Therm. Sci. 129 (Jul): 238–253. https://doi.org/10.1016/j.ijthermalsci.2018.02.030.
Hartnett, J. P., and W. M. Rohsenow. 1998. Handbook of heat transfer. New York: McGraw-Hill.
Liu, W. 2013. “Failure analysis on the economisers of a biomass fuel boiler.” Eng. Fail. Anal. 31 (Jul): 101–117. https://doi.org/10.1016/j.engfailanal.2013.01.024.
Liu, W. 2015. “The dynamic creep rupture of a secondary superheater tube in a 43 MW coal-fired boiler by the decarburization and multilayer oxide scale buildup on both sides.” Eng. Fail. Anal. 53 (Jul): 1–14. https://doi.org/10.1016/j.engfailanal.2015.03.018.
Modliński, N., P. Madejski, T. Janda, K. Szczepanek, and W. Kordylewski. 2015. “A validation of computational fluid dynamics temperature distribution prediction in a pulverized coal boiler with acoustic temperature measurement.” Energy 92 (2): 77–86. https://doi.org/10.1016/j.energy.2015.05.124.
Munda, P., S. Kumar, A. Prakash, M. M. Husain, V. Rajnikanth, and S. G. Chowdhury. 2016. “Failure investigation of boiler water wall tubes of a thermal power station.” J. Fail. Anal. Prev. 16 (1): 9–18. https://doi.org/10.1007/s11668-015-0055-0.
Nagai, M., N. Miura, and M. Shiratori. 2015. “Stress intensity factor solution for a surface crack with high aspect ratio subjected to an arbitrary stress distribution using the influence function method.” Int. J. Pressure Vessel Pip. 131 (Jul): 2–9. https://doi.org/10.1016/j.ijpvp.2015.04.003.
Ozhigov, L. S., A. S. Mitrofanov, G. D. Tolstolutskaya, R. L. Vasilenko, A. G. Rudenko, V. V. Ruzhytskyi, N. D. Ribalchenko, and S. V. Shramchenko. 2017. “Comprehensive investigation of the metal in drums of boilers at thermal power stations.” Therm. Eng. 64 (5): 350–356. https://doi.org/10.1134/S0040601517050068.
Rakopoulos, C. D., A. A. El-Shirbini, and W. Murgatroyd. 1980. “An experimental-stochastic and theoretical analysis of the density wave instability in a helical monotube vapour generator.” Nucl. Eng. Des. 56 (2): 369–384. https://doi.org/10.1016/0029-5493(80)90137-5.
Rakopoulos, D., I. Avagianos, D. Almpanidis, N. Nikolopoulos, and P. Grammelis. 2017. “Dynamic modeling of a utility once-through pulverized-fuel steam generator.” J. Energy Eng. 143 (4): 04016070. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000426.
Singh, R. K., J. K. Sahu, and S. Tarafder. 2016. “Strain rate effect on cyclic deformation behaviour of advanced ultra-supercritical boiler grade wrought Ni-based superalloy IN740H at 760°C.” Mater. Sci. Eng. A 658 (Mar): 272–279. https://doi.org/10.1016/j.msea.2016.02.007.
Taler, D. 2007. “Tubular type heat flux meter for monitoring internal scale deposits in large steam boilers.” Heat Transfer Eng. 28 (3): 230–239. https://doi.org/10.1080/01457630601066889.
Taler, D., M. Trojan, P. Dzierwa, K. Kaczmarski, and J. Taler. 2018. “Numerical simulation of convective superheaters in steam boilers.” Int. J. Therm. Sci. 129 (Jul): 320–333. https://doi.org/10.1016/j.ijthermalsci.2018.03.005.
Taler, J., P. Dzierwa, D. Taler, and P. Harchut. 2015a. “Optimization of the boiler start-up taking into account thermal stresses.” Energy 92 (Dec): 160–170. https://doi.org/10.1016/j.energy.2015.03.095.
Taler, J., D. Taler, and P. Ludowski. 2014. “Measurements of local heat flux to membrane water walls of combustion chambers.” Fuel 115 (1): 70–83. https://doi.org/10.1016/j.fuel.2013.06.033.
Taler, J., and B. Węglowski. 2014. Monitoring of thermal stresses in pressure components of steam boilers. Delft, Netherlands: Springer.
Taler, J., B. Węglowski, D. Taler, T. Sobota, P. Dzierwa, M. Trojan, P. Madejski, and M. Pilarczyk. 2015b. “Determination of start-up curves for a boiler with natural circulation based on the analysis of stress distribution in critical pressure components.” Energy 92 (Dec): 153–159. https://doi.org/10.1016/j.energy.2015.03.086.
Tavares, S. S. M., C. Scandian, M. C. S. de Macedo, J. M. Pardal, and F. J. da Silva. 2013. “Failure of tube used in high pressure steam generator due to incrustation deposits.” Eng. Fail. Anal. 35 (Dec): 25–32. https://doi.org/10.1016/j.engfailanal.2012.10.026.
Wang, X., G. Wang, C. Hong, and L. Zhang. 2017. “Real-time temperature field reconstruction of boiler drum based on fuzzy adaptive Kalman filter and order reduction.” Int. J. Therm. Sci. 113 (Mar): 145–153. https://doi.org/10.1016/j.ijthermalsci.2016.11.017.
Yang, S. M. 2001. “Improvement of the basic correlating equations and transition criteria of natural convection heat transfer.” Heat Transfer Asian Res. 30 (4): 293–300. https://doi.org/10.1002/htj.1018.
Zeng, L., X. Li, S. Zhang, J. Pei, M. Song, Z. Chen, L. Wang, J. Wang, and Z. Li. 2019. “Effects of OFA ratio on coal combustion and NOx generation of a 600-MW downfired boiler after changing air distribution around fuel-rich flow.” J. Energy Eng. 145 (1): 04018073. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000593.
Zhou, H., G. Mo, Y. Yang, D. Si, and K. Cen. 2014. “Numerical investigation of gas-solid two-phase flow in a tiny-oil ignition cyclone burner for a 300-MW down-fired pulverized coal—Fired boiler.” J. Energy Eng. 140 (1): 04013010. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000151.
Zima, W., M. Nowak-Oclon, and P. Oclon. 2015. “Simulation of fluid heating in combustion chamber waterwalls of boilers for supercritical steam parameters.” Energy 92 (Dec): 117–127. https://doi.org/10.1016/j.energy.2015.02.111.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 2, 2019
Accepted: Jun 26, 2019
Published online: Dec 19, 2019
Published in print: Apr 1, 2020
Discussion open until: May 19, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.