Comparative Assessment for Improvement of Performance and Exhaust Emissions in Existing Dual-Fuel Diesel Engines
Publication: Journal of Energy Engineering
Volume 144, Issue 5
Abstract
Using natural gas as a supplement for the conventional diesel fuel in a compression-ignition environment—a natural gas/diesel dual-fuel (NG/DDF) engine—seems to be a solution for reducing soot and nitric oxide (NO) emissions in existing and future diesel motor vehicles. NG/DDF operation, compared with that of conventional diesel engines, suffers from higher specific energy consumption (SEC) and higher carbon monoxide (CO) and unburned hydrocarbons (HC) emissions. This seems to become more apparent at part-load operations. Diesel injection pressure (DIP) and cylinder pressure (CP) of the charge at the inlet valve closing (IVC) event () are two critical engine parameters which affect performance characteristics and pollutants of NO, CO, and soot of a NG/DDF engine. This work studies theoretically the effects of DIP and on the performance and exhaust emissions (NO, CO, and soot) of a light-duty diesel engine operated with methane, which is the chief component of natural gas. The study is carried out using a custom-built model, which is two-zone and of the phenomenological type. The accuracy of the modeling results is tested by using corresponding experimental data acquired by an extensive experimental study performed previously on a NG/DDF engine. The primary objectives of this comparative appraisal are to specify the effects of the aforementioned parameters on the emitted pollutants and the performance characteristics of the specific engine, and to record the disadvantages and advantages. The conclusions of the specific investigation are useful, particularly to identify the optimum combination of the strategies for improving the overall performance of an existing compression-ignition (CI) engine operating with natural gas/diesel.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abd Alla, G. H. 2002. “Using exhaust gas recirculation in internal combustion engines: A review.” Energy Convers. Manage. 43 (8): 1027–1042. https://doi.org/10.1016/S0196-8904(01)00091-7.
Abd Alla, G. H., H. A. Soliman, M. F. Badr, and M. F. Abd Rabbo. 2000. “Effect of pilot fuel quantity on the performance of a dual fuel engine.” Energy Convers. Manage. 41 (6): 559–572. https://doi.org/10.1016/S0196-8904(99)00124-7.
Abd Alla, G. H., H. A. Soliman, M. F. Badr, and M. F. Abd Rabbo. 2002. “Effect of injection timing on the performance of a dual fuel engine.” Energy Convers. Manage. 43 (2): 269–277. https://doi.org/10.1016/S0196-8904(00)00168-0.
Agathou, M. S., and D. C. Kyritsis. 2014. “Experimental study of steady, quasi cone-jet electrostatic sprays of bio-butanol for engine applications.” J. Energy Eng. 140 (3): A4014008. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000141.
Annand, W. J. D. 1963. “Heat transfer in the cylinders of reciprocating internal combustion engines.” Proc. Inst. Mech. Eng. 177 (36): 973–990.
Benson, R. S., and N. D. Whitehouse. 1979. Internal combustion engines. Oxford, UK: Pergamon.
Blizard, N. C., and J. C. Keck. 1974. Experimental and theoretical investigation of turbulent burning model for internal combustion engines. SAE Paper No. 740191. Warrendale, PA: Society of Automotive Engineers International.
Bora, B. J., and U. K. Saha. 2016. “Theoretical performance limits of a biogas-diesel powered dual fuel diesel engine for different combinations of compression ratio and injection timing.” J. Energy Eng. 142 (2): E4015001. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000293.
D’Andrea, T., P. F. Henshaw, and S. K. Ting. 2004. “The addition of hydrogen to a gasoline-fuelled SI engine.” Int. J. Hydrogen Energy 29 (14): 1541–1552. https://doi.org/10.1016/j.ijhydene.2004.02.002.
Debnath, B. K., N. Sahoo, B. J. Bora, and U. K. Saha. 2014. “Influence of emulsified palm biodiesel as pilot fuel in a biogas run dual fuel diesel engine.” J. Energy Eng. 140 (3): A4014005. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000163.
Ferguson, C. R. 1986. Internal combustion engines. New York: Wiley.
Galal, M. G., M. M. Abdel Aal, and M. A. El Kady. 2002. “A comparative study between diesel and dual-fuel engines: Performance and emissions.” Combust. Sci. Technol. 174 (11&12): 241–256. https://doi.org/10.1080/713712964.
Giakoumis, E. G., C. D. Rakopoulos, and D. C. Rakopoulos. 2014. “An assessment of NOx emissions during transient diesel engine operation with biodiesel blends.” J. Energy Eng. 140 (3): A4014004. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000136.
Giakoumis, E. G., D. C. Rakopoulos, and C. D. Rakopoulos. 2016. “Combustion noise radiation during dynamic diesel engine operation including effects of various biofuel blends: A review.” Renewable Sustainable Energy Rev. 54: 1099–1113. https://doi.org/10.1016/j.rser.2015.10.129.
Goncalves, C. K., J. A. S. Tenorio, Y. A. Levendis, and J. B. Carlson. 2008. “Emissions from the premixed combustion of gasified polyethylene.” Energy Fuels 22 (1): 372–381. https://doi.org/10.1021/ef700379c.
Heywood, J. B. 1988. Internal combustion engine fundamentals. New York: McGraw-Hill.
Hiroyasu, H., T. Kadota, and M. Arai. 1983. “Development and use of a spray combustion modeling to predict diesel engine efficiency and pollutant emissions.” Bull. JSME 26 (214): 569–575. https://doi.org/10.1299/jsme1958.26.569.
Ishida, M., T. Tagai, and H. Ueki. 2003. “Effect of EGR and preheating on natural gas combustion assisted with gas-oil in a diesel engine.” JSME Int. J. Ser. B 46 (1): 124–130. https://doi.org/10.1299/jsmeb.46.124.
Karim, G. A. 2003. “Combustion in gas fueled compression: Ignition engines of the dual fuel type.” Trans. ASME J. Eng. Gas Turbines Power 125 (3): 827–836. https://doi.org/10.1115/1.1581894.
Korakianitis, T., A. M. Namasivayam, and R. J. Crookes. 2011. “Natural-gas fuelled spark-ignition (SI) and compression-ignition (CI) engine performance and emissions.” Prog. Energy Combust. Sci. 37 (1): 89–112. https://doi.org/10.1016/j.pecs.2010.04.002.
Krishnan, S. R., M. Biruduganti, Y. Mo, S. R. Bell, and K. C. Midkiff. 2002. “Performance and heat release analysis of a pilot-ignited natural gas engine.” Int. J. Engine Res. 3 (3): 171–184. https://doi.org/10.1243/14680870260189280.
Krishnan, S. R., and K. K. Srinivasan. 2010. “Multi-zone modelling of partially premixed low-temperature combustion in pilot-ignited natural-gas engines.” Proc. Inst. Mech. Eng. Part D J. Automobile Eng. 224 (12): 1597–1622. https://doi.org/10.1243/09544070JAUTO1472.
Krishnan, S. R., K. K. Srinivasan, and K. C. Midkiff. 2007. Phenomenological modeling of low-temperature advanced low pilot-ignited natural gas combustion. SAE Paper No. 2007-01-0942. Warrendale, PA: Society of Automotive Engineers International.
Krishnan, S. R., K. K. Srinivasan, and M. S. Raihan. 2016. “The effect of injection parameters and boost pressure on diesel-propane dual fuel low temperature combustion in a single-cylinder research engine.” Fuel 184 (7): 490–502. https://doi.org/10.1016/j.fuel.2016.07.042.
Krishnan, S. R., K. K. Srinivasan, S. Singh, S. R. Bell, K. C. Midkiff, W. Gong, S. Fiveland, and M. Willi. 2004. “Strategies for reduced NOx emissions in pilot-ignited natural gas engines.” Trans. ASME J. Eng. Gas Turbines Power 126 (3): 665–671. https://doi.org/10.1115/1.1760530.
Kusaka, J., T. Okamoto, Y. Daisho, R. Kihara, and T. Saito. 2000. “Combustion and exhaust gas emission characteristics of a diesel engine dual-fueled with natural gas.” JSAE Rev. 21 (4): 489–496. https://doi.org/10.1016/S0389-4304(00)00071-0.
Labeckas, G., S. Slavinskas, and V. Vilutiene. 2015. “Effect of the cetane number improving additive on combustion, performance, and emissions of a DI diesel engine operating on JP-8 fuel.” J. Energy Eng. 141 (2): C4014005. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000222.
Larsen, C. A., and Y. A. Levendis. 1998. On the effectiveness and economy of operation of ART-EGR systems that reduce diesel emissions. SAE Paper No. 980537. Warrendale, PA: Society of Automotive Engineers International.
Lavoie, G. A., J. B. Heywood, and J. C. Keck. 1970. “Experimental and theoretical study of nitric oxide formation in internal combustion engines.” Combust. Sci. Technol. 1 (4): 313–326. https://doi.org/10.1080/00102206908952211.
Levendis, Y. A., T. Panagiotou, and M. E. Tasilm. 1990. Development of a self-cleaning particle trap for diesel engine particulate control. SAE Paper No. 900601. Warrendale, PA: Society of Automotive Engineers International.
Li, M., Q. Zhang, G. Li, and S. Shao. 2015. “Experimental investigation on performance and heat release analysis of a pilot ignited direct injection natural gas engine.” Energy 90 (7): 1251–1260. https://doi.org/10.1016/j.energy.2015.06.089.
Papagiannakis, R. G. 2011. “Comparative evaluation of the effect of partial substitution of diesel fuel by natural gas on performance and emissions of a fumigated dual fuel diesel engine.” Energy Environ. Eng. 2 (2): 31–43.
Papagiannakis, R. G. 2012. “Study of air inlet preheating and EGR impacts for improving the operation of compression ignition engine running under dual fuel mode.” Energy Convers. Manage. 68 (12): 40–53. https://doi.org/10.1016/j.enconman.2012.12.019.
Papagiannakis, R. G., and D. T. Hountalas. 2002. Theoretical and experimental investigation of a direct injection dual fuel diesel-natural gas engine. SAE Paper No. 2002-01-0868. Warrendale, PA: Society of Automotive Engineers International.
Papagiannakis, R. G., and D. T. Hountalas. 2003. “Experimental investigation concerning the effect of natural gas percentage on performance and emissions of a DI dual fuel diesel engine.” Appl. Thermal Eng. 23 (3): 353–365. https://doi.org/10.1016/S1359-4311(02)00187-4.
Papagiannakis, R. G., and D. T. Hountalas. 2004. “Combustion and exhaust emission characteristics of a dual fuel compression ignition engine operated with pilot diesel fuel and natural gas.” Energy Convers. Manage. 45 (18&19): 2971–2987. https://doi.org/10.1016/j.enconman.2004.01.013.
Papagiannakis, R. G., and D. T. Hountalas. 2011. “The impact of total equivalence ratio on environmental behavior of a natural gas dual fuel diesel engine.” Energy Environ. 6 (5): 733–744.
Papagiannakis, R. G., D. T. Hountalas, and P. N. Kotsiopoulos. 2005. Experimental and theoretical analysis of the combustion and pollutants formation mechanisms in dual fuel DI diesel engines. SAE Paper No. 2005-01-1726. Warrendale, PA: Society of Automotive Engineers International.
Papagiannakis, R. G., D. T. Hountalas, S. R. Krishnan, K. K. Srinivasan, D. C. Rakopoulos, and C. D. Rakopoulos. 2016. “Numerical evaluation of the effects of compression ratio and diesel fuel injection timing on the performance and emissions of a fumigated natural gas-diesel dual-fuel engine.” J. Energy Eng. 142 (2): E4015015. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000326.
Pirouzpanah, V., and B. O. Kashani. 1999. Prediction of major pollutants emission in direct-injection dual-fuel diesel and natural-gas engines. SAE Paper No. 1999-01-0841. Warrendale, PA: Society of Automotive Engineers International.
Pirouzpanah, V., and R. K. Saray. 2003. “Reduction of emissions in an automobile direct injection diesel engine dual-fuelled with natural gas by using variable exhaust gas recirculation.” Proc. Inst. Mech. Eng. Part D J. Automobile Eng. 217 (8): 719–725.
Pirouzpanah, V., R. K. Saray, A. Sohrabi, and A. Niaei. 2007. “Comparison of thermal and radical effects of EGR gases on combustion process in dual fuel engines at part loads.” Energy Convers. Manage. 48 (7): 1909–1918. https://doi.org/10.1016/j.enconman.2007.01.031.
Poonia, M. P., A. Ramesh, and R. R. Gaur. 1998. Effect of Intake air temperature and pilot fuel quantity on the combustion characteristics of a LPG diesel dual fuel engine. SAE Paper No. 982455. Warrendale, PA: Society of Automotive Engineers International.
Poonia, M. P., A. Ramesh, and R. R. Gaur. 1999. Experimental investigation of the factors affecting the performance of a LPG-diesel dual fuel engine. SAE Paper No. 1999-01-1123. Warrendale, PA: Society of Automotive Engineers International.
Poonia, M. P., A. Ramesh, R. R. Gaur, and A. Joshi. 2012. “Effect of pilot fuel quantity, injector needle lift pressure and load on combustion characteristics of an LPG diesel dual fuel engine.” Eng. Innov. Technol. 2 (1): 26–31.
Pulkrabek, W. W. 2004. Engineering fundamentals of internal combustion engines. Upper Saddle River, NJ: Pearson.
Qi, D. H., H. Chen, L. M. Geng, and Z. Y. Bian. 2010. “Experimental studies on the combustion characteristics and performance of a direct injection engine fueled with biodiesel/diesel blends.” Energy Convers. Manage. 51 (12): 2985–2992. https://doi.org/10.1016/j.enconman.2010.06.042.
Qi, Y., K. K. Srinivasan, S. R. Krishnan, H. Yang, and K. C. Midkiff. 2007. “Effect of hot exhaust gas recirculation on the performance and emissions of an advanced injection low pilot-ignited natural gas engine.” Int. J. Engine Res. 8 (3): 289–303. https://doi.org/10.1243/14680874JER02306.
Raihan, M. S., E. S. Guerry, U. Dwivedi, K. K. Srinivasan, and S. R. Krishnan. 2015. “Experimental analysis of diesel-ignited methane dual fuel low temperature combustion in a single cylinder diesel engine.” J. Energy Eng. 141 (2): A4014007. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000235.
Rakopoulos, C. D., E. G. Giakoumis, D. T. Hountalas, and D. C. Rakopoulos. 2004a. The effect of various dynamic, thermodynamic and design parameters on the performance of a turbocharged diesel engine operating under transient load conditions. SAE Paper No. 2004-01-0926. Warrendale, PA: Society of Automotive Engineers International.
Rakopoulos, C. D., and G. C. Mavropoulos. 2000. “Experimental instantaneous heat fluxes in the cylinder head and exhaust manifold of an air-cooled diesel engine.” Energy Convers. Manage. 41 (12): 1265–1281. https://doi.org/10.1016/S0196-8904(99)00179-X.
Rakopoulos, C. D., C. N. Michos, and E. G. Giakoumis. 2008. “Availability analysis of a syngas fueled spark ignition engine using a multi-zone combustion model.” Energy 33 (9): 1378–1398. https://doi.org/10.1016/j.energy.2008.05.007.
Rakopoulos, C. D., D. C. Rakopoulos, E. G. Giakoumis, and D. C. Kyritsis. 2011. “The combustion of n-butanol/diesel fuel blends and its cyclic variability in a direct injection diesel engine.” Proc. Inst. Mech. Eng. Part A J. Power Energy 225 (3): 289–308. https://doi.org/10.1177/2041296710394256.
Rakopoulos, C. D., D. C. Rakopoulos, and D. C. Kyritsis. 2003. “Development and validation of a comprehensive two-zone model for combustion and emissions formation in a DI diesel engine.” Int. J. Energy Res. 27 (14): 1221–1249. https://doi.org/10.1002/er.939.
Rakopoulos, C. D., D. C. Rakopoulos, G. C. Mavropoulos, and E. G. Giakoumis. 2004b. “Experimental and theoretical study of the short term response temperature transients in the cylinder walls of a diesel engine at various operating conditions.” Appl. Thermal Eng. 24 (5–6): 679–702. https://doi.org/10.1016/j.applthermaleng.2003.11.002.
Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, A. M. Dimaratos, and E. C. Kakaras. 2014. “Comparative evaluation of two straight vegetable oils and their methyl ester bio-diesels as fuel extenders in HDDI diesel engine: Performance and emissions.” J. Energy Eng. 140 (3): A4014001. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000137.
Rakopoulos, D. C., C. D. Rakopoulos, and D. C. Kyritsis. 2016. Butanol or DEE blends with either straight vegetable oil or biodiesel excluding fossil fuel: Comparative effects on diesel engine combustion attributes, cyclic variability and regulated emissions trade-off. Energy 115: 314–325. https://doi.org/10.1016/j.energy.2016.09.022.
Reitz, R. D. 2013. “Directions in internal combustion engine research.” Combust. Flame 160 (1): 1–8. https://doi.org/10.1016/j.combustflame.2012.11.002.
Sahoo, B. B., N. Sahoo, and U. K. Saha. 2009. “Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines: A critical review.” Renewable Sustainable Energy Rev. 13 (6–7): 1151–1184. https://doi.org/10.1016/j.rser.2008.08.003.
Singh, S., S. C. Kong, R. D. Reitz, S. R. Krishnan, and K. C. Midkiff. 2004a. Modeling and experiments of dual-fuel engine combustion and emissions. SAE Paper No. 2004-01-0092. Warrendale, PA: Society of Automotive Engineers International.
Singh, S., S. R. Krishnan, K. K. Srinivasan, K. C. Midkiff, and S. R. Bell. 2004b. “Effect of pilot injection timing, pilot quantity, and intake charge conditions on performance and emissions for an advanced low-pilot-ignited natural gas engine.” Int. J. Engine Res. 5 (4): 329–348. https://doi.org/10.1243/146808704323224231.
Srinivasan, K. K., S. R. Bell, W. Gong, S. B. Fiveland, S. R. Krishnan, S. Singh, and K. C. Midkiff. 2004. “The advanced injection low pilot ignited natural gas engine: A combustion analysis.” Trans. ASME J. Eng. Gas Turbines Power 128 (1): 213–218. https://doi.org/10.1115/1.1915428.
Srinivasan, K. K., S. R. Krishnan, and K. C. Midkiff. 2006. “Improving low load combustion, stability and emissions in pilot-ignited natural gas engines.” Proc. Inst. Mech. Eng. Part D J. Automobile Eng. 220 (2): 229–239. https://doi.org/10.1243/09544070JAUTO104.
Srinivasan, K. K., S. R. Krishnan, Y. Qi, K. C. Midkiff, and H. Yang. 2007. “Analysis of diesel pilot-ignited natural gas low-temperature combustion with hot exhaust gas recirculation.” Combust. Sci. Technol. 179 (9): 1737–1776. https://doi.org/10.1080/00102200701259882.
Vickland, C. W., F. M. Strange, R. A. Bell, and E. S. Starkman. 1962. “A consideration of the high temperature thermodynamics of internal combustion engines.” Trans. SAE 70: 785–793.
Whitehouse, N. D., and R. J. B. Way. 1969. “Rate of heat release in diesel engines and its correlation with fuel injection data.” Proc. Inst. Mech. Eng. 184 (10): 17–29. https://doi.org/10.1243/PIME_CONF_1969_184_315_02.
Zannis, T. C., E. G. Pariotis, D. T. Hountalas, D. C. Rakopoulos, and Y. A. Levendis. 2007. “Theoretical study of DI diesel engine performance and pollutant emissions using comparable air-side and fuel-side oxygen addition.” Energy Convers. Manage. 48 (11): 2962–2970. https://doi.org/10.1016/j.enconman.2007.07.007.
Zhang, Q., M. Li, and S. Shao. 2015. “Combustion process and emissions of a heavy-duty engine fueled with directly injected natural gas and pilot diesel.” Appl. Energy 157 (8): 217–228. https://doi.org/10.1016/j.apenergy.2015.08.021.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 144 • Issue 5 • October 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 17, 2017
Accepted: Apr 23, 2018
Published online: Jul 23, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.