Economic Dispatch of an Integrated Heat-Power Energy Distribution System with a Concentrating Solar Power Energy Hub
Publication: Journal of Energy Engineering
Volume 143, Issue 5
Abstract
Using multiple energy resources greatly enhances system operating flexibility and efficiency. An energy hub is a vital facility, producing, converting, and storing energy in different forms. Considering heat-power cogeneration and thermal storage capabilities, concentrating solar power (CSP) acts as an energy hub, building physical connections between the power distribution network (PDN) and the district heating network (DHN) in integrated energy systems. The CSP hub, the PDN, and the DHN are respectively formulated to model the economic dispatch of an integrated heat-power distribution system. The linearized DistFLOW model is used to describe the electrical power flow in the PDN. The hydraulic-thermal model is employed to formulate steady-state nodal temperature with constant mass flow rates. Both operating costs and carbon emissions are considered in the objective function, yielding mixed-integer programming with a convex quadratic objective and linear constraints that can be solved by commercial solvers. The effectiveness of the proposed model and the method are validated on a test system in terms of reducing operating costs, carbon emissions, and renewable spillage.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported in part by the National Natural Science Foundation of China (Nos. 51621065, 51567021, and 51577163) and the State Grid Technology Program (SGRI-DL-71-15-006).
References
Aalborg CSP. (2015). “CSP project overview of Aalborg CSP company.” ⟨http:/www.aalborgcsp.com/projects/project-overview/⟩ (Sep. 19, 2016).
Adinberg, R. (2011). “Simulation analysis of thermal storage for concentrating solar power.” Appl. Therm. Eng., 31(16), 3588–3594.
Awad, B., Chaudry, M., Wu, J., and Jenkins, N. (2009). “Integrated optimal power flow for electric power and heat in a microgrid.” 20th Int. Conf. and Exhibition on Electricity Distribution—Part 1, 2009. CIRED 2009, IET, IET Conference Publications, Stevenage, Herts, U.K., 1–4.
Baldvinsson, I., and Nakata, T. (2016). “Cost assessment of a district heating system in northern Japan using a geographic information-based mixed integer linear programming model.” J. Energy Eng., F4016006.
Baran, M. E., and Wu, F. F. (1989). “Network reconfiguration in distribution systems for loss reduction and load balancing.” IEEE Trans. Power Delivery, 4(2), 1401–1407.
Bird, L., et al. (2016). “Wind and solar energy curtailment: A review of international experience.” Renewable Sustainable Energy Rev., 65, 577–586.
Brunekreeft, G., et al. (2015). “Regulatory pathways for smart grid development in China.” Regulatory pathways for smart grid development in China, Springer, Wiesbaden, Germany, 119–138.
Chen, R. (2015). “Reducing generation uncertainty by integrating CSP with wind power: An adaptive robust optimization-based analysis.” IEEE Trans. Sustainable Energy, 6(2), 583–594.
CPLEX version 12.1 [Computer software]. IBM, Armonk, NY.
Dallmer-Zerbe, K., Bucher, M. A., Ulbig, A., and Andersson, G. (2013). “Assessment of capacity factor and dispatch flexibility of concentrated solar power units.” PowerTech (POWERTECH), 2013 IEEE Grenoble, IEEE, Piscataway, NJ, 1–6.
Denholm, P., and Hummon, M. (2012). Simulating the value of concentrating solar power with thermal energy storage in a production cost model, National Renewable Energy Laboratory, Golden, CO.
Fang, C., Chen, L., Zhang, Y., Wang, C., and Mei, S. (2014). “Operation of low-carbon-emission microgrid considering wind power generation and compressed air energy storage.” 33rd Chinese Control Conf. (CCC), 2014, IEEE, New York, 7472–7477.
Farivar, M., and Low, S. H. (2013). “Branch flow model: Relaxations and convexification—Part I.” IEEE Trans. Power Syst., 28(3), 2554–2564.
Geidl, M., and Andersson, G. (2007). “Optimal power flow of multiple energy carriers.” IEEE Trans. Power Syst., 22(1), 145–155.
Geidl, M., Koeppel, G., Favre-Perrod, P., Klockl, B., Andersson, G., and Frohlich, K. (2007). “Energy hubs for the future.” IEEE Power Energy Mag., 5(1), 24–30.
Gilman, P., Blair, N., Mehos, M., Christensen, C., Janzou, S., and Cameron, C. (2008). “Solar advisor model user guide for version 2.0.”, National Renewable Energy Laboratory, Golden, CO.
Grazzini, G., and Milazzo, A. (2012). “A thermodynamic analysis of multistage adiabatic CAES.” Proc. IEEE, 100(2), 461–472.
Hang, Q., Zhao, J., Xiao, Y., and Cui, J. (2008). “Prospect of concentrating solar power in China—the sustainable future.” Renewable Sustainable Energy Rev., 12(9), 2505–2514.
He, G., Chen, Q., Kang, C., and Xia, Q. (2016). “Optimal operating strategy and revenue estimates for the arbitrage of a vanadium redox flow battery considering dynamic efficiencies and capacity loss.” IET Gener. Transm. Distrib., 10(5), 1278–1285.
Ji, Z., Kang, C., Chen, Q., and Xia, Q. (2013). “Low-carbon power system dispatch incorporating carbon capture power plants.” IEEE Trans. Power Syst., 28(4), 4615–4623.
Johnson, K. C. (2010). “A decarbonization strategy for the electricity sector: New-source subsidies.” Energy Policy, 38(5), 2499–2507.
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., and Stefanakos, E. K. (2013). “Thermal energy storage technologies and systems for concentrating solar power plants.” Prog. Energy Combust. Sci., 39(4), 285–319.
Li, C., et al. (2015). “Comprehensive review of renewable energy curtailment and avoidance: A specific example in China.” Renewable Sustainable Energy Rev., 41, 1067–1079.
Li, J., Fang, J., Zeng, Q., and Chen, Z. (2016a). “Optimal operation of the integrated electrical and heating systems to accommodate the intermittent renewable sources.” Appl. Energy, 167, 244–254.
Li, R. (2016). “System data.” ⟨https://sites.google.com/site/ruilismarterrlc⟩ (Mar. 31, 2017).
Li, R., Chen, L., Yuan, T., and Li, C. (2016b). “Optimal dispatch of zero-carbon-emission micro energy internet integrated with non-supplementary fired compressed air energy storage system.” Power System Clean Energy, 4(4), 566–580.
Li, Z., Wu, W., Shahidehpour, M., Wang, J., and Zhang, B. (2016c). “Combined heat and power dispatch considering pipeline energy storage of district heating network.” IEEE Trans. Sustainable Energy, 7(1), 12–22.
Liu, X., Wu, J., Jenkins, N., and Bagdanavicius, A. (2016). “Combined analysis of electricity and heat networks.” Appl. Energy, 162, 1238–1250.
Lofberg, J. (2004). “YALMIP: A toolbox for modeling and optimization in MATLAB.” IEEE Int. Symp. on Computer Aided Control Systems Design, IEEE, New York, 284–289.
Lund, H., et al. (2014). “4th generation district heating (4GDH): Integrating smart thermal grids into future sustainable energy systems.” Energy, 68, 1–11.
Lund, H., and Münster, E. (2006). “Integrated energy systems and local energy markets.” Energy Policy, 34(10), 1152–1160.
Madaeni, S. H., Sioshansi, R., and Denholm, P. (2012). “How thermal energy storage enhances the economic viability of concentrating solar power.” Proc. IEEE, 100(2), 335–347.
Madaeni, S. H., Sioshansi, R., and Denholm, P. (2013). “Estimating the capacity value of concentrating solar power plants with thermal energy storage: A case study of the southwestern United States.” IEEE Trans. Power Syst., 28(2), 1205–1215.
Mancarella, P. (2014). “MES (multi-energy systems): An overview of concepts and evaluation models.” Energy, 65, 1–17.
MATLAB [Computer software]. MathWorks, Natick, MA.
Mei, S., et al. (2015). “Design and engineering implementation of non-supplementary fired compressed air energy storage system: TICC-500.” Sci. China Technol. Sci., 58(4), 600–611.
Mei, S., et al. (2016). “Paving the way to smart micro energy internet: Concepts, design principles, and engineering practices.”, Cornell Univ. Library, Ithaca, NY.
Montes, M., Abánades, A., Martinez-Val, J., and Valdés, M. (2009). “Solar multiple optimization for a solar-only thermal power plant, using oil as heat transfer fluid in the parabolic trough collectors.” Solar Energy, 83(12), 2165–2176.
Ogriseck, S. (2009). “Integration of kalina cycle in a combined heat and power plant, a case study.” Appl. Thermal Eng., 29(14), 2843–2848.
Pirouti, M., Bagdanavicius, A., Ekanayake, J., Wu, J., and Jenkins, N. (2013). “Energy consumption and economic analyses of a district heating network.” Energy, 57, 149–159.
Py, X., et al. (2011). “Recycled material for sensible heat based thermal energy storage to be used in concentrated solar thermal power plants.” J. Sol. Energy Eng., 133(3), 031008.
Shabanpour-Haghighi, A., and Seifi, A. R. (2015). “Energy flow optimization in multicarrier systems.” IEEE Trans. Ind. Inf., 11(5), 1067–1077.
Shafiee, S., Zareipour, H., and Knight, A. (2016). “Considering thermodynamic characteristics of a CAES facility in self-scheduling in energy and reserve markets.” IEEE Trans. Smart Grid, PP(99), 1–1.
Siddiqui, A. S., Marnay, C., Edwards, J. L., Firestone, R., Ghosh, S., and Stadler, M. (2005). “Effects of carbon tax on microgrid combined heat and power adoption.” J. Energy Eng., 2–25.
Sioshansi, R., and Denholm, P. (2010). “The value of concentrating solar power and thermal energy storage.” IEEE Trans. Sustainable Energy, 1(3), 173–183.
Sioshansi, R., and Denholm, P. (2013). “Benefits of colocating concentrating solar power and wind.” IEEE Trans. Sustainable Energy, 4(4), 877–885.
Tan, S., Xu, J.-X., and Panda, S. K. (2013). “Optimization of distribution network incorporating distributed generators: An integrated approach.” IEEE Trans. Power Syst., 28(3), 2421–2432.
Usaola, J. (2012). “Operation of concentrating solar power plants with storage in spot electricity markets.” IET Renewable Power Gener., 6(1), 59–66.
Viebahn, P., Lechon, Y., and Trieb, F. (2011). “The potential role of concentrated solar power (CSP) in Africa and Europe—A dynamic assessment of technology development, cost development and life cycle inventories until 2050.” Energy Policy, 39(8), 4420–4430.
Wang, C., Wei, W., Wang, J., Liu, F., and Mei, S. (2016). “Strategic bidding and equilibria in coupled gas and electricity markets.”, Cornell Univ. Library, Ithaca, NY.
Wang, Z., Chen, H., Wang, J., and Begovic, M. (2014). “Inverter-less hybrid voltage/var control for distribution circuits with photovoltaic generators.” IEEE Trans. Smart Grid, 5(6), 2718–2728.
Wei, W., Mei, S., Wu, L., Shahidehpour, M., and Fang, Y. (2017). “Optimal traffic-power flow in urban electrified transportation networks.” IEEE Trans. Smart Grid, 8(1), 84–95.
Xin, W. (2017). “Grid-connected operation of renewable energy in northwest China in 2016.” ⟨http://xbj.nea.gov.cn/website/Aastatic/news-176162.html⟩ (Mar. 31, 2017).
YALMIP [Computer software]. MathWorks, Natick, MA.
Yeh, H.-G., Gayme, D. F., and Low, S. H. (2012). “Adaptive var control for distribution circuits with photovoltaic generators.” IEEE Trans. Power Syst., 27(3), 1656–1663.
Zhao, H. (1995). Analysis, modelling and operational optimazation of district heating systems, Centre for District Heating Technology, Technical Univ. of Denmark, Lyngby, Denmark.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 16, 2016
Accepted: Mar 21, 2017
Published online: Jun 30, 2017
Published in print: Oct 1, 2017
Discussion open until: Nov 30, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.