Modeling of Heat Losses from a PCM Storage Tank for Solar Thermophotovoltaic Systems
Publication: Journal of Energy Engineering
Volume 143, Issue 5
Abstract
This work explores the influence of lateral heat losses from a phase change material (PCM) storage tank on the performance of a storage integrated solar thermophotovoltaic (SISTPV) system by means of an analytical model. The heat losses from the lateral surface of the PCM tank are modeled using Newton’s law of cooling by prescribing a heat-loss coefficient on the lateral surfaces. The results show that at high heat losses, low thermal efficiencies are realized. Correspondingly larger solar concentrations are required to fully melt the PCM tank. At low heat losses, such as can be expected when using thermal insulation on the lateral surfaces, approximately 40% thermal efficiency can be realized. The results also demonstrate that a high absorber area:length of PCM tank squared (SR) ratio enables the system to have a high thermal efficiency. For a high-SR, low-heat-loss design case, having a high taper ratio, high area ratio between absorber area and inlet hole area, and small PCM tank length all achieve higher thermal efficiencies. It is expected that these SISTPV systems will be designed at steady-state to be fully molten in order to maximize thermal energy storage via the latent heat of the PCM. The analytical model developed here can be used to predict the design conditions under which the PCM tank will be fully molten.
Get full access to this article
View all available purchase options and get full access to this article.
References
An, C., and Su, J. (2013). “Lumped parameter model for one-dimensional melting in a slab with volumetric heat generation.” Appl. Therm. Eng., 60(1–2), 387–396.
Belusko, M., Halawa, E., and Bruno, F. (2012). “Characterising PCM thermal storage systems using the effectiveness-NTU approach.” Int. J. Heat Mass Transfer, 55(13–14), 3359–3365.
Brent, A., Voller, V., and Reid, K. T. J. (1988). “Enthalpy-porosity technique for modeling convection-diffusion phase change: Application to the melting of a pure metal.” Numer. Heat Transfer Part A Appl., 13(3), 297–318.
Chubb, D. L., Good, B. S., and Lowe, R. A. (1996). “Solar thermophotovoltaic (STPV) system with thermal energy storage.” AIP Conf. Proc., 358(1), 181–198.
Datas, A. (2015). “Optimum semiconductor bandgaps in single junction and multijunction thermophotovoltaic converters.” Sol. Energy Mater. Sol. Cells, 134(0), 275–290.
Datas, A., and Algora, C. (2012). “Global optimization of solar thermophotovoltaic systems.” Prog. Photovoltaics Res. Appl., 21(5), 1040–1055.
Datas, A., Chubb, D. L., and Veeraragavan, A. (2013). “Steady state analysis of a storage integrated solar thermophotovoltaic (SISTPV) system.” Sol. Energy, 96, 33–45.
Gilpin, M. R., Scharfe, D. B., Young, M. P., and Pancotti, A. P. (2011). “Molten boron phase-change thermal energy storage to augment solar thermal propulsion systems.” Proc., 47th AIAA Joint Propulsion Conf., AIAA, Reston, VA.
Gilpin, M. R., Scharfe, D. B., Young, M. P., and Webb, R. N. (2014). “Experimental investigation of latent heat thermal energy storage for bi-modal solar thermal propulsion.” Proc., 12th Int. Energy Conversion Engineering Conf., Air Force Research Lab Edwards AFB CA Aerospace Systems Directorate, AIAA, Reston, VA.
Kalaiselvam, S., Parameshwaran, R., and Harikrishnan, S. (2012). “Analytical and experimental investigations of nanoparticles embedded phase change materials for cooling application in modern buildings.” Renewable Energy, 39(1), 375–387.
Lagarias, J., Reeds, J., Wright, M., and Wright, P. (1998). “Convergence properties of the Nelder–Mead simplex method in low dimensions.” SIAM J. Optim., 9(1), 112–147.
Lenert, A., et al. (2014). “A nanophotonic solar thermophotovoltaic device.” Nat. Nanotechnol., 9(2), 126–130.
Lipnicki, Z., and Weigand, B. (2012). “An experimental and theoretical study of solidification in a free-convection flow inside a vertical annular enclosure.” Int. J. Heat Mass Transfer, 55(4), 655–664.
Mathematica version 10.0 [Computer software]. Wolfram Research, Champaign, IL.
Miljkovic, N., and Wang, E. N. (2011). “Modeling and optimization of hybrid solar thermoelectric systems with thermosyphons.” Sol. Energy, 85(11), 2843–2855.
Rösler, F., and Brüggemann, D. (2011). “Shell-and-tube type latent heat thermal energy storage: Numerical analysis and comparison with experiments.” Heat Mass Transfer, 47(8), 1027–1033.
Stone, K. W., Chubb, D. L., Wilt, D. M., and Wanlass, M. W. (1996). “Testing and modeling of a solar thermophotovoltaic power system.” AIP Conf. Proc., 358(1), 199–209.
Stone, K., Leingang, E., Drubka, R., Chubb, D., Good, B., and Wilt, D. (1995). “System performance of a solar thermophotovoltaic system for space and terrestrial application.” Proc., Intersociety Energy Conversion Engineering Conf. Proc., ASME, New York, 713–718.
Stone, K., Leingang, E., Drubka, R., and Fay, T. (1994a). “Solar thermophotovoltaic power experiments at McDonnell Douglas.” Proc., Intersociety Energy Conversion Engineering Conf., AIAA, Reston, VA, 1692–1696.
Stone, K., Leingang, E., Kusek, S., Drubka, R., and Fay, T. (1994b). “On-Sun test results of McDonnell Douglas’ prototype solar thermophotovoltaic power system.” Proc., Photovoltaic Energy Conversion, Conf. Record of the Twenty Fourth IEEE Photovoltaic Specialists Conference-1994, IEEE First World Conf., IEEE, New York, 2010–2013.
Timilsina, G. R., Kurdgelashvili, L., and Narbel, P. A. (2012). “Solar energy: Markets, economics and policies.” Renewable Sustainable Energy Rev., 16(1), 449–465.
Veeraragavan, A., Montgomery, L., and Datas, A. (2014). “Night time performance of a storage integrated solar thermophotovoltaic (SISTPV) system.” Sol. Energy, 108(0), 377–389.
Zalba, B., Marín, J. M., Cabeza, L. F., and Mehling, H. (2003). “Review on thermal energy storage with phase change: Materials, heat transfer analysis and applications.” Appl. Therm. Eng., 23(3), 251–283.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Aug 1, 2016
Accepted: Feb 6, 2017
Published online: May 27, 2017
Published in print: Oct 1, 2017
Discussion open until: Oct 27, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.