Effects of Nanofluids on the Performance of a PCM-Based Thermal Energy Storage System
Publication: Journal of Energy Engineering
Volume 143, Issue 4
Abstract
To study the thermal effects of using nanofluid as a heat transfer fluid (HTF) in a thermocline-type packed-bed energy storage tank filled with spherical phase-changing material (PCM) capsules, an in-house Fortran code is developed and validated using existing experimental and numerical data. The current assessment study shows that use of a nanofluid as HTF is able to accelerate the charging and discharging periods, hence positively affecting the thermal storage efficiency. For instance, using a nanofluid with a 5% nanoparticle concentration as HFT would reduce the charging/discharging period by about 20%. Hence, the current findings reveal that the use of a nanofluid as HTF should be considered for future design of thermocline-type packed-bed energy storage tanks of commercial size. The fact that the nanoparticles’ concentration is directly affecting the heat transfer rate can be used as an adjustable parameter during the design and optimization stages of the thermal storage.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge Prof. D. C. Kyritsis for the technical discussions during the progress of this study and for his comments on the final manuscript. The first author conducted part of this work while being hosted by Dr. J. Ik Lee as a visiting Professor at the Department of Nuclear and Quantum Engineering, KAIST, South Korea.
References
COMSOL Multiphysics v 4.2 [Computer software]. COMSOL Lab, Stockholm, Sweden.
Abu-Nada, E. (2011). “Rayleigh-Bénard convection in nanofluids: Effects of temperature dependent properties.” Int. J. Therm. Sci., 50(9), 1720–1730.
Abu-Nada, E., Masoud, Z., and Hijazi, A. (2008a). “Natural convection heat transfer enhancement in a horizontal concentric annuli using nanofluids.” Int. Comm. Heat Mass Transfer, 35(5), 657–665.
Abu-Nada, E., and Oztop, H. F. (2009). “Effects of inclination angle on natural convection in enclosures filled with Cu-water nanofluid.” Int. J. Heat Fluid Flow, 30(4), 669–678.
Abu-Nada, E., Ziyad, K., Saleh, M., and Ali, Y. (2008b). “Heat transfer enhancement in combined convection around a horizontal cylinder using nanofluids.” J. Heat Trans., 130(8), 084505.
Abutayeh, M., Alazzam, A., and Khasawneh, B. (2015). “Optimizing thermal energy storage operation.” Solar Energy J., 120, 318–329.
Achenbach, E. (1995). “Review: Heat and fluid flow characteristics of packed beds.” Exp. Therm. Fluid Sci., 10(1), 17–27.
Aminossadati, S. M., and Ghasemi, B. (2009). “Natural convection cooling of a localised heat source at the bottom of a nanofluid-filled enclosure.” Eur. J. Mech. B-Fluid, 28(5), 630–640.
Beasley, D. E., and Ramanarayanan, C. (1989). “Thermal response of a packed bed of spheres containing a phase-change material.” Int. J. Energy Res., 13(3), 253–265.
Bellan, S., et al. (2014a). “Numerical analysis of charging and discharging performance of a thermal energy storage system with encapsulated phase change material.” App. Therm. Eng., 71(1), 481–500.
Bellan, S., et al. (2014b). “Transient numerical analysis of storage tanks based on encapsulated PCMs for heat storage in concentrating solar power plants.” Energy Procedia, 57, 672–681.
Bellan, S., et al. (2015). “Numerical and experimental studies on heat transfer characteristics of thermal energy storage system packed with molten salt PCM capsules.” Appl. Therm. Eng., 90, 970–979.
Benmansour, A., Hamdan, M. A., and Bengeuddach, A. (2006). “Experimental and numerical investigation of solid particles thermal energy storage.” App. Therm. Eng., 26(5-6), 513–518.
Cascetta, M., Cau, G., Puddu, P., and Serra, F. (2014). “Numerical investigation of a packed bed thermal energy storage system with different heat transfer fluids.” Energy Procedia, 45, 598–607.
Gnielinski, V. (1979). “Gleichungen zur Berechnung des wärme- und stoffaustsusches in durchströmten ruhenden kugelschüttungen bei mittleren und grossen pecletzahlen.” Verfahrenstechnik, 12(6), 63–366 (in German).
Griffiths, P. W., and Eames, P. C. (2007). “Performance of chilled ceiling panels using phase change material slurries as the heat transport medium.” Appl. Therm. Eng., 27(10), 1756–1760.
Hamilton, R. L., and Crosser, O. K. (1962). “Thermal conductivity of heterogeneous two-component system.” I&EC Fundam., 1(3), 187–191.
Khalif, A., Tan, L., Date, A., and Akbarzadeh, A. (2015). “Performance of suspended finned heat pipes in high-temperature latent heat thermal energy storage.” Appl. Therm. Eng., 81, 242–252.
Khanafer, K., Vafai, K., and Lightstone, M. (2003). “Buoyancy driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids.” Int. J. Heat Mass Transfer, 46(19), 3639–3653.
Liwu, F., and Khodadadi, J. M. (2011). “Thermal conductivity enhancement of phase change materials for thermal energy storage: A review.” Renew. Sustain. Energy Rev., 15(1), 24–46.
Mathur, A., Kasetty, R., Oxley, J., Mendez, J., and Nithyanandam, K. (2014). “Using encapsulated phase change salts for concentrated solar power plant.” Energy Procedia, 49, 908–915.
Peng, H., Dong, H., and Ling, X. (2014). “Thermal investigation of PCM-based high temperature thermal energy storage in packed bed.” Energy Convers. Manage., 81, 420–427.
Regin, A. F., Solanki, S. C., and Saini, J. S. (2008). “Heat transfer characteristics of thermal energy storage using spherical capsules: A review.” Renew. Sustain. Energy Rev., 12(9), 2438–2458.
Solutia Inc. (2004). “Properties of therminol 66.” ⟨https://www.sintelub.com/files/Therminol_66.pdf⟩ (Jun. 19, 2016).
Strasser, M. N., and Selvam, R. P. (2014). “A cost and performance comparison of packed bed and structured thermocline thermal energy storage systems.” Solar Energy, 108, 390–402.
Trelles, J. P., and Dufly, J. J. (2003). “Numerical simulation of porous latent heat thermal energy storage for thermoelectric cooling.” Appl. Therm. Eng., 23(13), 1647–1664.
Versteeg, H. K., and Malalasekera, W. (1995). An introduction to computational fluid dynamic: The finite volume method, Wiley, New York.
Wong, K. V., and De Leon, O. (2010). “Applications of nanofluids: Current and future.” Adv. Mech. Eng., 2, 519659.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jun 22, 2016
Accepted: Oct 14, 2016
Published online: Feb 13, 2017
Discussion open until: Jul 13, 2017
Published in print: Aug 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.