Sensitivities in the Modeling of Electrostatically Charged Droplet Evaporation and Combustion
Publication: Journal of Energy Engineering
Volume 143, Issue 3
Abstract
Electrostatic charging has the potential to enhance droplet evaporation in liquid-fueled combustion applications. Based on well-established experimental evidence, it is known that as an electrostatically charged droplet evaporates and approaches the Rayleigh limit, it fragments into a residual droplet and a number of other sibling droplets. This process can reduce the total vaporization time. In the context of combustion, the produced sibling droplets will burn, reducing the vaporization time of the charged residual due to heat release; however, this process has not been studied in the literature. In this paper, a traditional droplet-evaporation model is extended to account for the influence of reacting sibling droplets on the vaporization and electrostatic atomization of an electrified residual droplet. The single-droplet modeling approach with and without charge is initially validated against existent experimental data and is in excellent agreement with published results. The sensitivity of the model that accounts for burning sibling droplets is subsequently assessed with respect to key parameters of experimental relevance. These include the number of siblings , initial droplet charge with respect to the Rayleigh limit , and residual droplet charge with respect to the primary droplet charge , as well as the Reynolds number. This simple yet new approach highlighted here sheds light on the relevance of different electrostatic and physical parameters on the modeling of electrostatically charged droplet evaporation in reacting and nonreacting settings.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agathou, M., and Kyritsis, D. (2014). “Experimental study of steady quasi-cone-jet electrostatic sprays of biobutanol for engine applications.” J. Energy Eng., .
Anderson, E., Koch, J., and Kyritsis, D. (2008). “Phenomenology of electrostatically charged droplet combustion in normal gravity.” Combust. Flame, 154(3), 624–629.
Anderson, E., Kyritsis, D., Carlucci, A., and De Risi, A. (2007). “Electrostatic effects on gasoline direct injection in atmospheric ambiance.” Atomization Sprays, 17(4), 289–313.
Bankston, C., Back, L., Kwack, E., and Kelly, A. (1988). “Experimental investigation of electrostatic dispersion and combustion of diesel fuel jets.” J. Eng. Gas Turbines Power, 110(3), 361–368.
Cloupeau, M., and Prunet-Foch, B. (1990). “Electrostatic spraying of liquids: Main functioning modes.” J. Electrostat., 25(2), 165–184.
Downing, C. (1966). “The evaporation of drops of pure liquids at elevated temperatures: Rates of evaporation and wet-bulb temperatures.” AIChE J., 12(4), 760–766.
Gomez, A., Berry, J., Roychoudhury, S., Coriton, B., and Huth, J. (2007). “From jet fuel to electric power using a mesoscale, efficient Stirling cycle.” Proc. Combust. Inst., 31(2), 3251–3259.
Gomez, A., and Tang, K. (1994a). “Charge and fission of droplets in electrostatic sprays.” Phys. Fluids, 6(1), 404–414.
Gomez, A., and Tang, K. (1994b). “On the structure of an electrostatic spray of monodisperse droplets.” Phys. Fluids, 6(1), 2317–2332.
Heye, C., Kourmatzis, A., Raman, V., and Masri, A. (2014). “A comparative study of the simulation of turbulent ethanol spray flames.” Experiments and numerical simulations of turbulent combustion of diluted sprays, B. Merci and E. Gutheil, eds., Springer, Berlin.
Kelly, A. (1984). “The electrostatic atomization of hydrocarbons.” J. Inst. Energy, 57, 312–320.
Kelly, A. (1988). “Charge injection electrostatic atomizer performance modelling.” Proc., 4th ICLASS, Institute of Liquid Atomization and Sprays, 139–144.
Kelly, A. (1990). “Charge injection electrostatic atomizer modelling.” Aerosol Sci. Technol., 12(3), 526–537.
Kim, K., and Turnbull, J. (1976). “Generation of charged drops of insulating liquids by electrostatic spraying.” J. Appl. Phys., 47(5), 1964–1969.
Kourmatzis, A., and Shrimpton, J. (2009). “Electrohydrodynamics and charge injection atomizers: A review of the governing equations and turbulence.” Atomization Sprays, 19(11), 1045–1063.
Kourmatzis, A., and Shrimpton, J. (2014). “Electrohydrodynamic inter-electrode flow and liquid jet characteristics in charge injection atomizers.” Exp. Fluids, 55, 1–13.
Kyritsis, D., Coriton, B., Faure, F., Roychoudhury, S., and Gomez, A. (2004a). “Optimization of a catalytic combustor using electrosprayed liquid hydrocarbons for mesoscale power generation.” Combust. Flame, 139(1–2), 77–89.
Kyritsis, D., Guerrero-Arias, I., Roychoudhury, S., and Gomez, A. (2002). “Mesoscale power generation by a catalytic combustor using electrosprayed liquid hydrocarbons.” Proc. Combust. Inst., 29(1), 965–972.
Kyritsis, D., Roychoudhury, S., McEnally, C., Pfefferle, L., and Gomez, A. (2004b). “Mesoscale combustion: A first step towards liquid fueled batteries.” Exp. Therm. Fluid Sci., 28(7), 763–770.
Lehr, W., and Hiller, W. (1993). “Electrostatic atomization of liquid hydrocarbons.” J. Electrostat., 30, 433–440.
Masri, A., Kourmatzis, A., O’Loughlin, W., and Gounder, J. (2014). “From dilute to dense turbulent sprays: Combustion, auto-ignition and atomization.” Experiments and numerical simulations of turbulent combustion of diluted sprays, B Merci and E. Gutheil, eds., Springer, Berlin.
Miller, R., Harstad, K., and Bellan, J. (1998). “Evaluation of equilibrium and non-equilibrium evaporation models for many-droplet gas-liquid flow simulations.” Int. J. Multiphase Flow, 24(6), 1025–1055.
Patyal, A., Kyritsis, D., and Matalon, M. (2016). “Electric field effects in the presence of chemi-ionization on droplet burning.” Combust. Flame, 164, 99–110.
Pennisi, M., and Kyritsis, D. (2003). “Experimental characterization of 1-butanol electrospray combustion.” 8th U.S. National Combustion Meeting, Combustion Institute, Pittsburgh.
Ranz, W., and Marshall, W. (1952). “Evaporation from drops—II.” Chem. Eng. Prog., 48, 141–146.
Rayleigh. (1882). “On the equilibrium of liquid conducting masses charged with electricity.” Philos. Mag., 14(87), 184–186.
Rigit, A., and Shrimpton, J. (2006). “Electrical performance of charge injection electrostatic atomizers.” Atomization Sprays, 16(4), 401–420.
Rigit, A., and Shrimpton, J. (2009). “Estimation of the diameter-charge distribution in polydisperse electrically charged sprays of electrically insulating liquids.” Exp. Fluids, 46(6), 1159–1171.
Roth, D., and Kelly, A. (1961). “Analysis of the disruption of evaporating charged droplets.” ARS J., 31, 1467–1468.
Shrimpton, J. (2005). “Dielectric charged drop break up at sub-Rayleigh conditions.” IEEE Trans. Dielectr. Electr. Insul., 12(3), 573–578.
Shrimpton, J. (2008). “Modeling dielectric charged drop break up using an energy conservation method.” IEEE Trans. Dielectr. Electr. Insul., 15(5), 1471–1477.
Shrimpton, J. (2009). Charge injection systems: Physical principles, experimental and theoretical work, Springer, Berlin.
Shrimpton, J., and Kourmatzis, A. (2009). “Downsizing direct injection spark ignition engines: A timescale analysis.” Traffic related air pollution and internal combustion engines, S. Demidov and J. Bonnet, eds., Nova, New York.
Shrimpton, J., and Kourmatzis, A. (2010). “Direct numerical simulation of forced flow dielectric EHD within charge injection atomizers.” IEEE Trans. Dielectr. Electr. Insul., 17(6), 1838–1845.
Shrimpton, J., and Laoonual, Y. (2006). “Dynamics of electrically charged transient evaporating sprays.” Int. J. Numer. Methods Eng., 67(8), 1063–1081.
Shrimpton, J. S., and Yule, A. J. (1999). “Characterization of charged hydrocarbon sprays for application in combustion systems.” Exp. Fluids, 26(5), 460–469.
Thong, K., and Weinberg, F. (1971). “Electrical control of the combustion of solid and liquid particulate suspensions.” Proc. R. Soc. London, 324(1557), 201–215.
Tomar, G., et al. (2007). “Two-phase electrohydrodynamic simulations using a volume-of-fluid approach.” J. Comput. Phys., 227(2), 1267–1285.
Turns, S. (2012). An introduction to combustion, McGraw Hill International, New York.
Van Poppel, B., Desjardins, O., and Daily, J. (2010). “A ghost fluid, level set methodology for simulating multiphase electrohydrodynamic flows with application to liquid fuel injection.” J. Comput. Phys., 229(20), 7977–7996.
Wong, S., and Lin, A. (1992). “Internal temperature distributions of droplets vaporizing in high-temperature convective flows.” J. Fluid Mech., 237, 671–687.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 143 • Issue 3 • June 2017
Copyright
©2016 American Society of Civil Engineers.
History
Received: May 20, 2016
Accepted: Aug 15, 2016
Published online: Oct 21, 2016
Discussion open until: Mar 21, 2017
Published in print: Jun 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.