Thermodynamic Optimization Tools for Power Tracking in a Multistage Concentrated Solar Power Rankine Plant
Publication: Journal of Energy Engineering
Volume 143, Issue 1
Abstract
The object of the study is to present a method of thermodynamic optimization of power generating plants, in a mode that consolidates and simplifies the analysis of data on heat-work interaction of the plant components. The optimization scheme identifies the technical and process parameters that can improve the thermodynamic performance of the plant with respect to an objective variable, and further, the required thermodynamic measures necessary to improve the operating condition of the plant. Simple but effective tools are used to evaluate the optimal and suboptimal power generating capacities vis-à-vis the fundamental variables—namely, the thermodynamic quantity ratio (TQR) and the power-energy quantity ratio (PQR)—without routing optimization procedures. Beyond the optimal value of the objective variable, the power generation capacity of the plant is affected. The determination of the optimal value of the objective variable can also be approached by computerization; for fixed prescriptions of the boiler, superheater, and turbine parameters, variables such as boiler pressure and temperature can be optimally selected.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ankur, G., and Khandwawala, A. I. (2013). “Thermodynamic analysis of 120 MW thermal power plant with combined effect of constant inlet pressure (124.61 bar) and different inlet temperature.” Case Stud. Therm. Eng., 1(1), 17–25.
Badr, O., Probert, D. S., and O’Callaghan, P. W. (1985). “Selecting a working fluid for a Rankine-cycle engine.” Appl. Energy, 21(1), 1–42.
Clarke, J. (2014). “Optimal design of geothermal power plants theses and dissertations.” Graduate School, Virginia Commonwealth Univ., VCU Scholars Compass, Richmond, VA.
Ho, T., Samuel, M. S., and Ralph, G. (2012). “Comparison of the organic flash cycle (OFC) to other advanced vapor cycles for intermediate and high temperature waste heat reclamation and solar thermal energy.” Energy, 42(1), 213–223.
Huijuan, C. D., Yogi, G., and Stefanakos, E. K. (2010). “A review of thermodynamic cycles and working fluids for the conversion of low-grade heat.” Renewable Sustainable Energy Rev., 14(9), 3059–3067.
Kapooria, K. R., Kumar, S., and Kasana, K. S. (2008). “An analysis of a thermal power plant working on a Rankine cycle: A theoretical investigation.” J. Energy South. Afr., 19(1), 77–84.
Li, M., Wang, J., He, W., Wang, B., Ma, S., and Dai, Y. (2013). “Experimental evaluation of the regenerative and basic organic Rankine cycles for low-grade heat source utilization.” J. Energy Eng., 190–197.
Mu, Y., Zhang, Y., Deng, N., and Nie, J. (2015). “Experimental study of a low-temperature power generation system in an organic Rankine cycle.” J. Energy Eng., 04014017.
Nouman, J. (2012). “Comparative studies and analyses of working fluids for organic Rankine cycles—ORC.” M.Sc. thesis, KTH School of Industrial Engineering and Management Energy Technology, Stockholm, Sweden.
Roy, J. P., and Misra, A. (2012). “Parametric optimization and performance analysis of a regenerative organic Rankine cycle using R-123 for waste heat recovery.” Energy, 39(1), 227–235.
Siemens AG. (2010). “Siemens steam turbines for CSP plants industrial steam turbines answers for energy.” 〈http://www.energy.siemens.com/mx/pool/hq/power-generation/steam-turbines/downloads/brochure-orc-organic-Rankine-cycle-technology_EN.pdf〉.
Wanga, J., Yana, Z., Wanga, M., Maa, S., and Daia, Y. (2013). “Thermodynamic analysis and optimization of an (organic Rankine cycle) ORC using low grade heat source.” Energy, 49(1), 356–365.
Yekoladio, P. J., Bello-Ochende, T., and Meyer, P. J. (2015). “Thermodynamic analysis and performance optimization of organic Rankine cycles for the conversion of low-to-moderate grade geothermal heat.” Int. J. Energy Res., 39(9), 1256–1271.
Yunus, A. C., and Michael, A. B. (2006). Thermodynamics: An engineering approach, 5th Ed., McGraw-Hill, Boston, 551–584.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jul 16, 2015
Accepted: Feb 12, 2016
Published online: Jun 27, 2016
Discussion open until: Nov 27, 2016
Published in print: Feb 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.