Experimental Investigation on the Influence of Simulated EGR Addition on Swirl-Stabilized Flames
Publication: Journal of Energy Engineering
Volume 142, Issue 2
Abstract
Low-temperature combustion concepts for transport and power generation employ mixture dilution techniques, such as exhaust gas recirculation (EGR), that offer the potential of fuel flexibility, reduced pollutant emissions, and improved efficiency. These combustion modes, however, display a higher sensitivity to the compositional changes brought about by dilution, which in turn may have an adverse influence on the overall system performance. A fundamental study on the interactions between methane and simulated EGR was carried out on a swirl-stabilized, stoichiometric flame. The effects of varying levels and composition of diluents and preheating temperatures on flame structure and exhaust emissions, were experimentally investigated. Reductions of up to 90% and over 95% in and CO emissions, respectively, where observed for higher levels of added diluents, whereas an increase in preheating temperature resulted in the opposite trends. It has been further demonstrated that, depending on fuel and the chemical composition of the diluents, chemical effects on and CO emissions can be very significant.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/ under REA grant agreement number 607214.
References
Abd-Alla, G. H. (2002). “Using exhaust gas recirculation in internal combustion engines: A review.” Energy Convers. Manage., 43(8), 1027–1042.
Abdelaal, M. M., and Hegab, H. (2012). “Combustion and emission characteristics of a natural gas-fueled diesel engine with EGR.” Energy Convers. Manage., 64, 301–312.
AlQurashi, K., Zhang, Y., and Boehman, A. L. (2012). “Impact of intake addition and exhaust gas recirculation on emissions and soot reactivity in a common rail diesel engine.” Energy Fuels, 26(10), 6098–6105.
Asad, U., and Zheng, M. (2014). “Exhaust gas recirculation for advanced diesel combustion cycles.” Appl. Energy, 123, 242–252.
De Jager, B., Kok, J. B. W., and Skevis, G. (2007). “The effects of water addition on pollutant formation from LPP gas turbine combustors.” Proc. Combust. Inst., 31(2), 3123–3130.
Elia, M., Ulinski, M., and Metghalchi, M. (2001). “Laminar burning velocity of methane-air-diluent mixtures.” J. Eng. Gas Turbines Power, 123(1), 190–196.
Galmiche, B., Halter, F., Foucher, F., and Dagaut, P. (2011). “Effects of dilution on laminar burning velocity of premixed methane/air flames.” Energy Fuels, 25(3), 948–954.
Giakoumis, E. G., Rakopoulos, C. D., and Rakopoulos, D. C. (2014). “Assessment of emissions during transient diesel engine operation with biodiesel blends.” J. Energy Eng., A4014004.
Han, Y., Cai, G. B., Wang, H. X., Renou, B., and Boukhalfa, A. (2014). “Flow characterization and dilution effects of and on premixed flames in a swirl-stabilized combustor.” Chinese Phys. B, 23(3), 1–14.
Heitor, M. V., and Moreira, A. L. N. (1993). “Thermocouples and sample probes for combustion studies.” Prog. Energy Combust. Sci., 19(3), 259–278.
Hountalas, D. T., Mavropoulos, G. C., and Binder, K. B. (2008). “Effect of exhaust gas recirculation (EGR) temperature for various EGR rates on heavy duty DI diesel engine performance and emissions.” Energy, 33(2), 272–283.
Hu, E., Jiang, X., Huang, Z., and Iida, N. (2012). “Numerical study on the effects of diluents on the laminar burning velocity of methane-air mixtures.” Energy Fuels, 26(7), 4242–4252.
Iyogun, C. O., Birouk, M., and Kozinski, J. A. (2011). “Experimental investigation of the effect of fuel nozzle geometry on the stability of a swirling non-premixed methane flame.” Fuel, 90(4), 1416–1423.
Janssen, A. J., Kremer, F. W., Baron, J. H., Muether, M., Pischinger, S., and Klankermayer, J. (2011). “Tailor-made fuels from biomass for homogeneous low-temperature diesel combustion.” Energy Fuels, 25(10), 4734–4744.
Kakaee, A. H., Paykani, A., and Ghajar, M. (2014). “The influence of fuel composition on the combustion and emission characteristics of natural gas fueled engines.” Renewable Sustainable Energy Rev., 38, 64–78.
Karagiannaki, C., Paterakis, G., Souflas, K., Dogkas, E., and Koutmos, P. (2015). “Performance evaluation of a model swirl burner under premixed or stratified inlet mixture conditions.” J. Energy Eng., 141, C4014010.
Keramiotis, C., et al. (2012). “Experimental and computational study of methane mixtures pyrolysis in a flow reactor under atmospheric pressure.” Energy, 43(1), 103–110.
Keramiotis, C., and Founti, M. (2013). “An experimental investigation of stability and operation of a biogas fueled porous burner.” Fuel, 103, 278–284.
Kim, H. S., Arghode, V. K., Linck, M. B., and Gupta, A. K. (2009). “Hydrogen addition effects in a confined swirl-stabilized methane-air flame.” Int. J. Hydrogen Energy, 34(2), 1054–1062.
Kosmadakis, G., and Rakopoulos, C. (2015). “Computational fluid dynamics study of alternative nitric-oxide emission mechanisms in a spark-ignition engine fueled with hydrogen and operating in a wide range of exhaust gas recirculation rates for load control.” J. Energy Eng., 141, C4014008.
Lewis, J., Marsh, R., Sevcenco, Y., Morris, S., Griffiths, A. and Bowen, P. (2012). “The effect of variable fuel composition on a swirl-stabilised producer gas combustor.” Energy Convers. Manage., 64, 52–61.
Liuzzo, G., Verdone, N., and Bravi, M. (2007). “The benefits of flue gas recirculation in waste incineration.” Waste Manage., 27(1), 106–116.
MAN Diesel and Turbo. (2012). “Tier III two-stroke technology.” 〈http://marine.man.eu/docs/librariesprovider6/technical-papers/tier-iii-two-stroke-technology.pdf?sfvrsn=18〉 (Jul. 15, 2015).
Park, C., Won, S., Kim, C., and Choi, Y. (2012). “Effect of mixing with natural gas-hydrogen blends on combustion in heavy-duty spark ignition engine.” Fuel, 102, 299–304.
Rakopoulos, D. (2015). “Comparison of combustion, performance, and emissions of HSDI diesel engine operating on blends of diesel fuel with ethanol, n-butanol, or butanol isomer ether DEE.” J. Energy Eng., 141, C4014001.
Raucci, C., Smith, T., Sabbio, N., and Argyros, D. (2013). “Evaluating scenarios for alternative fuels in international shipping.” Proc., Low Carbon Shipping Conf., Energy Institute, Univ. College London, London, 1–16.
Reitz, R. D. (2013). “Directions in internal combustion engine research.” Combust. Flame, 160(1), 1–8.
Saxena, S., and Bedoya, I. D. (2013). “Fundamental phenomena affecting low temperature combustion and HCCI engines, high load limits and strategies for extending these limits.” Prog. Energy Combust. Sci., 39(5), 457–488.
Squaiella, L. L. F., Martins, C. A., and Lacava, P. T. (2013). “Strategies for emission control in diesel engine to meet Euro VI.” Fuel, 104(10), 183–193.
Syred, N., and Beer, J. (1974). “Combustion in swirling flows: A review.” Combust. Flame, 23(2), 143–201.
Taylor, A. M. K. P. (2008). “Science review of internal combustion engines.” Energy Policy, 36(12), 4657–4667.
Tira, H., et al. (2014). “Influence of fuel properties, hydrogen, and reformate additions on diesel-biogas dual-fueled engine.” J. Energy Eng., A4014003.
Torres, J., Bello, A., Sarmiento, J., Rostlowski, J., and Brady, J. (2003). “Exhaust emissions evaluation of Colombian commercial diesel fuels.” C. T. F Cienc. Tecnol. Futur., 2(4), 19–34.
Williams, T. C., Shaddix, C. R., and Schefer, R. W. (2007). “Effect of syngas composition and -diluted oxygen on performance of a premixed swirl-stabilized combustor.” Combust. Sci. Technol., 180(1), 64–88.
Wilson, D., and Lyons, K. (2008). “Effects of dilution and co-flow on the stability of lifted non-premixed biogas-like flames.” Fuel, 87(3), 405–413.
Xiouris, C., and Koutmos, P. (2011). “An experimental investigation of the interaction of swirl flow with partially premixed disk stabilized propane flames.” Exp. Therm. Fluid Sci., 35(6), 1055–1066.
Yao, M., Zheng, Z., and Liu, H. (2009). “Progress and recent trends in homogeneous charge compression ignition (HCCI) engines.” Prog. Energy Combust. Sci., 35(5), 398–437.
Yu, B., Kum, S. M., Lee, C. E., and Lee, S. (2013). “Effects of exhaust gas recirculation on the thermal efficiency and combustion characteristics for premixed combustion system.” Energy, 49, 375–383.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 18, 2015
Accepted: Jul 31, 2015
Published online: Oct 7, 2015
Discussion open until: Mar 7, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.