Studies on Characteristics and Formation of Soot Nanoparticles in an Ethylene/Air Inverse Diffusion Flame
Publication: Journal of Energy Engineering
Volume 142, Issue 3
Abstract
An ethylene/air inverse diffusion flame burner was assumed to generate a stable flame, and soot samples were captured at different locations around the outer edge along the height of the flame. The soot samples were then analyzed with transmission electron microscopy (TEM), gas chromatography-mass spectrometry (GC-MS), and other detection means, and a photoacoustic analyzer was introduced to detect the mass concentration of soot nanoparticles after inception based on their optical features. The results showed that the plot of soot concentration had the same tendency as the gas temperature’s, which increased first and then declined with the increase in flame height, but these two curves had two different turning points. As to the measurements of TEM, the morphology of soot particles exhibited diverse shapes and structures at different flame heights. Alkanes, cycloalkanes, olefins, benzene, anthracene, pyrene, and aromatic compounds were determined as the main components of soot by the detection of GC-MS. The soot formation process in the ethylene flame can be speculated to be ethylene pyrolysis, soot growth, and oxidation, as well as particulate coagulation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Natural Science Foundation of China (Grant No. 51176047) and the Natural Science Foundation of Hebei Province (Grant No. E2012502048).
References
Arnott, W. P., Moosmuller, H., Rogers, C. F., Jin, T., and Bruch, R. (1999). “Photoacoustic spectrometer for measuring light absorption by aerosol: Instrument description.” Atmos. Environ., 33(17), 2845–2852.
Bai, J. H., and Wang, G. C. (2005). “The advance in black carbon aerosol.” Sci. Technol. Eng., 5(9), 585–591 (in Chinese).
Blevins, L. G., Fletcher, R. A., Benner, B. A., Steel, E. B., Jr., and Mulholland, G. W. (2002). “The existence of young soot in the exhaust of inverse diffusion flames.” Proc. Combust. Inst., 29(2), 2325–2333.
Bockhorn, H. (1994). Soot formation in combustion: Mechanisms and models, Springer, Berlin.
Calcote, H. F., and Manos, D. M. (1983). “Effect of molecular structure on incipient soot formation.” Combust. Flame, 49(1–3), 289–304.
Frenklach, M. (2002). “Reaction mechanism of soot formation in flames.” Phys. Chem. Chem. Phys., 4(11), 2028–2037.
Hall-Roberts, V. J., Hayhurst, A. N., Knight, D. E., and Taylor, S. G. (2000). “The origin of soot in flames: Is the nucleus an ion?” Combust. Flame, 120(4), 578–584.
Haynes, B. S., and Wagner, H. G. (1981). “Soot formation.” Prog. Energy Combust. Sci., 7(4), 229–273.
Ishiguro, T., Takatori, Y., and Akihama, K. (1997). “Microstructure of diesel soot particles probed by electron microscopy: First observation of inner core and outer shell.” Combust. Flame, 108(1–2), 231–234.
Katta, V. R., Blevins, L. G., and Roquemore, W. M. (2005). “Dynamics of an inverse diffusion flame and its role in polycyclic-aromatic-hydrocarbon and soot formation.” Combust. Flame, 142(1–2), 33–51.
Kennedy, I. M. (1997). “Models of soot formation and oxidization.” Prog. Energy Combust. Sci., 23(2), 95–132.
Lee, E. J., Oh, K. C., and Shin, H. D. (2005). “Soot formation in inverse diffusion flames of diluted ethene.” Fuel, 84(5), 543–550.
McEnally, C. S., and Pfefferle, L. D. (2009). “Sooting tendencies of nonvolatile aromatic hydrocarbons.” Proc. Combust. Inst., 32(1), 673–679.
Mikofski, M. A., Williams, T. C., Shaddix, C. R., Fernandez-Pello, A. C., and Blevins, L. G. (2007). “Structure of laminar sooting inverse diffusion flames.” Combust. Flame, 149(4), 463–478.
Oh, K. C., Lee, U. D., Shin, H. D., and Lee, E. J. (2005). “The evolution of incipient soot particles in an inverse diffusion flame of ethane.” Combust. Flame, 140(3), 249–254.
Richter, H., and Howard, J. B. (2000). “Formation of polycyclic aromatic hydrocarbons and their growth to soot—A review of chemical reaction pathways.” Prog. Energy Combust. Sci., 26(4–6), 565–608.
Rosencwaig, A. (1980). Photoacoustics and photoacoustic spectroscopy, Wiley, New York.
Santamaria, A., Mondragon, F., Quinonez, W., Eddings, E. G., and Sarofim, A. F. (2007). “Average structural analysis of the extractable material of young soot gathered in an ethylene inverse diffusion flame.” Fuel, 86(12–13), 1908–1917.
Velasquez, M., Mondragon, F., and Santamaria, A. (2013). “Chemical characterization of soot precursors and soot particles produced in hexane and diesel surrogates using an inverse diffusion flame burner.” Fuel, 104, 681–690.
Wang, H. (2011). “Formation of nascent soot and other condensed-phase materials in flames.” Proc. Combust. Inst., 33(1), 41–67.
Yi, F., Xu, M. H., and Yu, D. X. (2002). “Research and development trend of ultrafine particles in the combustion process.” World Sci. Technol. R&D, 24(2), 53–59 (in Chinese).
Yong, E., Song, G. L., and Zhang, Y. (2006). “The environmental effects of particulate matter of black carbon.” Earth Environ., 34(1), 61–64 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 17, 2015
Accepted: Jul 7, 2015
Published online: Sep 10, 2015
Discussion open until: Feb 10, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.