Thermodynamic Comparison and Optimization of Supercritical Brayton Cycles with a Bottoming Transcritical Cycle
Publication: Journal of Energy Engineering
Volume 142, Issue 3
Abstract
This study investigated the feasibility of a combined cycle comprising a topping cycle and a bottoming cycle ( cycle). A simple cycle and a recompression cycle were considered as the topping configurations. Thermodynamic analyses and comparison were performed to evaluate the effects of key thermodynamic parameters on the behavior of combined cycles. In addition, a parameter optimization was achieved by means of a genetic algorithm to reach the maximum overall thermal efficiency. The results show that the thermal efficiency of the simple cycle increased with an increase in turbine expansion ratio and compressor inlet temperature. However, for the recompression cycle the thermal efficiency increased and then decreased as the turbine expansion ratio increased. Both the modified cycles with a bottoming cycle had higher performance, with thermal efficiency increase of 10.12 and 19.34% for combined recompression and simple configurations, respectively, in comparison to their original values. Furthermore, the values of exergy efficiency were 60.72 and 64.79% for the simple cycle and recompression cycle, respectively. The simple cycle and recompression cycle had a power ratio of 16.21 and 11.26%, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
References
Besarati, S. M., and Goswami, D. Y. (2014). “Analysis of advanced supercritical carbon dioxide power cycles with a bottoming cycle for concentrating solar power applications.” J. Sol. Energy Eng., 136(1), 010904.
Cayer, E., Galanis, N., and Nesreddine, H. (2010). “Parametric study and optimization of a transcritical power cycle using a low temperature source.” Appl. Energy, 87(4), 1349–1357.
Cayer, E., Galanisa, N., Desilets, M., Nesreddine, H., and Roy, P. (2009). “Analysis of a carbon dioxide transcritical power cycle using a low temperature source.” Appl. Energy, 86(7–8), 1055–1063.
Chacartegui, R., Munoz, J. M., Sánchez, D., Monje, B., and Sánchez, T. (2011). “Alternative cycles based on carbon dioxide for central receiver solar power plants.” Appl. Therm. Eng., 31(5), 872–879.
Chen, Y., Lundqvist, P., Johansson, A., and Platell, P. (2006). “A comparative study of the carbon dioxide transcritical power cycle compared with an organic Rankine cycle with R123 as working fluid in waste heat recovery.” Appl. Therm. Eng., 26(17–18), 2142–2147.
Dostal, V., Driscoll, M. J., Hejzlar, P., and Todreas, N. E. (2002). “A supercritical gas turbine power cycle for next-generation nuclear reactors.” Proc., 10th Int. Conf. on Nuclear Engineering, ASME, New York, 8.
“HEATRIC printed circuit heat exchangers.” (2014). 〈www.heatric.com〉 (Jul. 10, 2014).
Hejzlar, P., Dostal, V., Driscoll, M. J., Dumaz, P., Poullennec, G., and Alpy, N. (2006). “Assessment of gas cooled fast reactor with indirect supercritical cycle.” Nucl. Eng. Technol., 38(2), 109–118.
Holland, J. H. (1992). Adaptation in nature and artificial systems: An introductory analysis with applications to biology, control and artificial intelligence, MIT Press, Cambridge, MA.
Ishiyama, S., Mutoa, Y., Kato, Y., Nishio, S., Hayashi, T., and Nomoto, Y. (2008). “Study of steam, helium and supercritical turbine power generations in prototype fusion power reactor.” Prog. Nucl. Energy, 50(2–6), 325–332.
Jeong, W. S., and Jeong, Y. H. (2013). “Performance of supercritical Brayton cycle using -based binary mixture at varying critical points for SFR applications.” Nucl. Eng. Des., 262, 12–20.
Jeong, W. S., Lee, J. I., and Jeong, Y. H. (2011). “Potential improvements of supercritical recompression Brayton cycle by mixing other gases for power conversion system of a SFR.” Nucl. Eng. Des., 241(6), 2128–2137.
Kato, Y., Nitawaki, T., and Muto, Y. (2004). “Medium temperature carbon dioxide gas turbine reactor.” Nucl. Eng. Des., 230(1–3), 195–207.
Lemmon, E. W., et al. (2010). “NIST standard reference database 23: Reference fluid thermodynamic and transport properties-REFPROP, version 9.0.” National Institute of Standards and Technology, Standard Reference Data Program, Gaithersburg, MD.
Linares, J. I., Herranz, L. E., Moratilla, B. Y., and Serrano, I. P. (2011). “Power conversion systems based on Brayton cycles for fusion reactors.” Fusion Eng. Des., 86(9–11), 2735–2738.
Moisseytsev, A., and Sienicki, J. J. (2009). “Investigation of alternative layouts for the supercritical carbon dioxide Brayton cycle for a sodium-cooled fast reactor.” Nucl. Eng. Des., 239(7), 1362–1371.
National Bureau of Statistics of China. (2014). “China statistical yearbook 2014.” 〈http://www.stats.gov.cn/english/Statisticaldata/AnnualData〉 (Sep. 21, 2014).
Sánchez, D., Brenes, B. M., Munoz, J. M., and Chacartegui, R. (2013). “Non-conventional combined cycle for intermediate temperature systems.” Int. J. Energy Res., 37(5), 403–411.
Sarkar, J. (2009). “Second law analysis of supercritical recompression Brayton cycle.” Energy, 34(9), 1172–1178.
Song, Y. H., Wang, J. F., Dai, Y. P., and Zhou, E. M. (2012). “Thermodynamic analysis of a transcritical power cycle driven by solar energy with liquified natural gas as its heat sink.” Appl. Energy, 92, 194–203.
Turchi, C. S., Ma, Z., Neises, T., and Wagner, M. (2012). “Thermodynamic study of advanced supercritical carbon dioxide power cycles for high performance concentrating solar power systems.” Proc., 6th ASME Int. Conf. on Energy Sustainability, ASME Advanced Energy System Division, ASME Solar Energy Division, San Diego, 375–383.
Wang, J. F., Sun, Z. X., Dai, Y. P., and Ma, S. L. (2010). “Parametric optimization design for supercritical power cycle using genetic algorithm and artificial neural network.” Appl. Energy, 87(4), 1317–1324.
Wang, J. F., Zhao, P., Niu, X. Q., and Dai, Y. P. (2012). “Parametric analysis of a new combined cooling, heating and power system with transcritical driven by solar energy.” Appl. Energy, 94, 58–64.
Wang, X. R., Wu, Y., Wang, J. F., Dai, Y. P., and Xie, D. M. (2015). “Thermo-economic analysis of a recompression supercritical cycle combined with a transcritical cycle.” Proc., ASME Turbo Expo, Montréal.
“World sea temperatures.” (2015). 〈http://www.sea-temperature.com〉 (May 4, 2015).
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jan 27, 2015
Accepted: May 14, 2015
Published online: Jul 7, 2015
Discussion open until: Dec 7, 2015
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.