Thermodynamic and Experimental Studies of Hydrogen Production from Dimethyl Ether Steam Reforming Utilization of Exhaust Gas
Publication: Journal of Energy Engineering
Volume 141, Issue 4
Abstract
In this paper, a thermodynamic equilibrium analysis coupled with experimentation for the hydrogen production from dimethyl ether is performed by total Gibbs free energy minimization method. Heat requirement from the process can be achieved from the exhaust gas of the engine. The effects of temperature of exhaust gas (250–400)°C and ratio of steam to Dimethyl ether (DME) (1.5–5) on the equilibrium compositions, yield of hydrogen and energy efficiency of the system are analyzed. In this way, the most thermodynamic favorable operating conditions have been identified. Experimental study is implemented on a self-designed equipment. Experimental results over the catalyst are compared against the results obtained from thermodynamic analysis.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by Innovation Program of Shanghai Municipal Education Commission under Grant 13YZ115.
References
Aspen Tech [Computer software]. Aspen Plus V11.1 user guide.
Choi, Y., and Stenger, H. G. (2005). “Kinetics, simulation and optimization of methanol steam reformer for fuel cell applications.” J. Power Sources, 142(1–2), 81–91.
Dokamaingam, P., and Assabumrungrat, S. (2009). “Modeling of SOFC with indirect internal reforming operation: Comparison of conventional packed-bed and catalytic coated-wall internal reformer.” Int. J. Hydrogen Energy, 34(1), 410–421.
Faungnawakij, K., Nawin, V., and Tanthapanichakoon, W. (2011). “Evaluation of the thermodynamic equilibrium of the autothermal reforming of dimethyl ether.” Int. J. Hydrogen Energy, 36(10), 5865–5874.
Feng, D. M., Wang, Y. Y., Wang, D., and Wang, J. F. (2009). “Steam reforming of dimethyl ether over Cu-ZnO-AL2O3-ZrO2+ZSM-5: A kinetic study.” Chem. Eng. J., 146(3), 477–485.
Gomes, S. R., Biona, N., Blanchard, G., Rousseau, S., and Bellière-Baca, V. (2012). “Thermodynamic and experimental studies of catalytic reforming of exhaust gas recirculation in gasoline engines.” Appl. Catal. B: Environ., 44–53.
Hemmes, K., and Patil, A. (2008). “Flexible coproduction of hydrogen and power using internal reforming solid oxide fuel cells system.” J. Fuel Cell Sci. Technol., 12(5), 1–5.
Lima, A. S., Iduvirges, C. F., and Malfatti, L. M. (2009). “Thermodynamic analysis of ethanol steam reforming using Gibbs energy minimization method: A detailed study of the conditions of carbon deposition.” Int. J. Hydrogen Energy, 34(10), 4321–4330.
Lin, S. T., Chen, Y. H., Yu, C. C., Liu, Y. C., and Lee, C. H. (2006). “Dynamic modeling and control structure design of an experimental fuel processor.” Int. J. Hydrogen Energy, 31(3), 413–426.
Loukou, A., Frenzel, I., and Klein, J. (2012). “Experimental study of hydrogen production and soot particulate matter emissions from methane rich-combustion in inert porous media.” Int. J. Hydrogen Energy, 37(1), 6686–6696.
Park, J., Bae, J., and Lee, S. (2010). “Numerical analysis of a steam reformer coupled with a combustion burner.” J. Fuel Cell Sci. Technol., 7(6), 1–6.
Park, J., and Lee, S. (2009). “Heat flux analysis of a cylindrical steam reformer by a modified Nusselt number.” Int. J. Hydrogen Energy, 34(3), 1578–1584.
Rossi, C. C. R. S., Alonso, C. G., Antunes, O. A. C., Guirardello, R., and Cardozo-Filho, L. (2009). “Thermodynamic analysis of steam reforming of ethanol and glycerine for hydrogen production.” Int. J. Hydrogen Energy, 34(1), 323–332.
Semelsberger, T. A., Borup, A. L., and Michael, A. (2005). “Thermodynamic equilibrium calculations of dimethyl ether steam reforming and dimethyl ether hydrolysis.” J. Power Soures, 152(1–2), 87–96.
Tanaka, Y. H., and Kikuchi, R. (2005). “Steam reforming of dimethyl ether over composite catalysts of AL2O3 and Cu-based spinel.” Appl. Catal. B, 57(3), 211–222.
Wang, S. Z., Ishihara, T., and Takita, Y. (2002). “Partial oxidation of dimethyl ether over various supported metal catalysts.” Appl. Catal. A, 228(1–2), 167–176.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 17, 2014
Accepted: Oct 1, 2014
Published online: Nov 3, 2014
Discussion open until: Apr 3, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.