Tensile Properties of a Series of Palladium-Silver Alloys Exposed to Hydrogen
Publication: Journal of Energy Engineering
Volume 141, Issue 3
Abstract
The effects on the strength, hardness, and ductility of a series of well-annealed palladium-silver alloys due to hydrogen exposure were investigated at various temperatures. The results indicate that the temperature at which hydrogen exposure occurs can have a significant effect on the degree to which these mechanical properties are altered. At relatively low temperatures, it was found that the strength and hardness of the alloy are increased, while ductility is decreased upon hydrogen exposure. In alloys where such changes are observed, the magnitude of these changes was found to diminish as the silver content increases. Above a certain hydrogen exposure temperature—the value of which decreases with increasing silver content—the strength, hardness, and ductility of the alloy show no significant changes as a result of hydrogen exposure.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the donors of the Petroleum Research Fund, administered by the American Chemical Society, for support of this research.
References
Askeland, D. (1984). The science and engineering of materials, PWS-Kent Publishing, Boston.
Carpena-Nunez, J., Yang, D., Kim, J., Park, C., and Fonseca, L. (2013). “Mechanical characterization of pristine and hydrogen-exposed palladium nanowires by in situ TEM.” Nanotechnology, 24(3).
Chen, H., and Chung, T. (2012). “-selective membranes for hydrogen purification and the effect of carbon monoxide (CO) on its gas separation performance.” Int. J. Hydrogen Energy, 37(7), 6001–6011.
Dahlmeyer, J., et al. (2011). “Effects of hydrogen exposure temperature on the tensile strength, microhardness and ductility of (25 wt.%) alloy.” Scripta Mater., 64(8), 789–792.
Dillon, E., Jimenez, G., Davie, A., Bulak, J., Nesbit, S., and Craft, A. (2009). “Factors influencing the tensile strength, hardness and ductility of hydrogen-cycled palladium.” Mater. Sci. Eng. A, 524(1–2), 89–97.
Herm, Z., Swisher, J., Smit, B., Krishna, R., and Long, J. (2011). “Metal–organic frameworks as adsorbents for hydrogen purification and precombustion carbon dioxide capture.” J. Am. Chem. Soc., 133(15), 5664–5667.
Kawasaki, A., Itoh, S., Shima, K., and Yamazaki, T. (2012). “Deformation of palladium plates by small external stress during hydrogen absorption and desorption.” Mater. Sci. Eng. A, 551, 231–235.
Krenn, C. (2004). “Continuum modelling of transformation hysteresis in a metal hydride system.” Modelling Simul. Mater. Sci. Eng., 12(4), S415–S424.
Lau, C., et al. (2011). “Silica nanohybrid membranes with high affinity for green hydrogen purification.” Adv. Energy Mater., 1(4), 634–642.
Lewis, F. (1967). The palladium hydrogen system, Academic, New York.
McLeod, L., Degertekin, F., and Fedorov, A. (2009). “Non-ideal absorption effects on hydrogen permeation through palladium-silver alloy membranes.” J. Membrane Sci., 339(1–2), 109–114.
Millet, P., Ngameni, R., Decaux, C., and Grigoriev, S. (2011). “Hydrogen sorption by metallic membranes. Role of hydrogen content, temperature and sample microstructure.” Int. J. Hydrogen Energy, 36(6), 4262–4269.
Mueller, W., Blackledge, J., and Libowitz, G., eds. (1968). Metal hydrides, Academic, New York.
Okazaki, J., Tanaka, D., Tanco, M., Wakui, Y., Mizukami, F., and Suzuki, T. (2006). “Hydrogen permeability study on the thin Pd-Ag alloy membranes in the temperature range across the phase transition.” J. Membrane Sci., 282(1–2), 370–374.
Perrot, P., Moelans, N., and Lebrun, N. (2006). Noble metal ternary systems: Phase diagrams, crystallographic and thermodynamic data, G. Effenberg and S. Ilyenko, eds., Springer, Berlin.
Pinto, F., Andre, R., Franco, C., Carolino, C., and Gulyurtlu, I. (2013). “Effect of syngas composition on hydrogen permeation through a Pd-Ag membrane.” Fuel, 103, 444–453.
Rebeiz, K., and Craft, A. (2000). “Tensile characteristics of palladium exposed to hydrogen (deuterium).” J. Energy Eng., 95–106.
Timofeev, N., Berseneva, F., and Makarov, M. (1994). “New palladium-based membrane alloys for separation of gas mixtures to generate ultrapure hydrogen.” Int. J. Hydrogen Energy, 19(11), 895–898.
Tosti, S., Bettinali, L., and Violante, V. (2000). “Rolled thin Pd and Pd-Ag membranes for hydrogen separation and production.” Int. J. Hydrogen Energy, 25(4), 319–325.
Tranchemontagne, D., Park, K., Furukawa, H., Eckert, J., Nobler, C., and Yaghi, O. (2012). “Hydrogen storage in new metal-organic frameworks.” J. Phys. Chem. C, 116(24), 13143–13151.
Vadrucci, M., Borgognoni, F., Moriani, A., Santucci, A., and Tosti, S. (2013). “Hydrogen permeation through Pd-Ag membranes: Surface effects and Sieverts’ law.” Int. J. Hydrogen Energy, 38(10), 4144–4152.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 20, 2014
Accepted: May 1, 2014
Published online: Jun 19, 2014
Discussion open until: Nov 19, 2014
Published in print: Sep 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.