Effects of Overfire Air Ratio on the Aerodynamic Flow Fields of a 350-Megawatt Supercritical Boiler Incorporating Multi-Injection and Multistage Combustion Technology
Publication: Journal of Energy Engineering
Volume 141, Issue 3
Abstract
Cold airflow experiments were performed using a 1:10 scale model of a down-fired, pulverized coal 350-megawatt (MW) supercritical utility boiler incorporating multiple-injection and multiple-staging combustion technology. The effects of varying the overfire air (OFA) ratio on the aerodynamic flow fields in the furnace were investigated using ratio settings of 1.9, 9.6, 19.1, and 28.7%. The results showed that, at ratios of 9.6, 19.1, and 28.7%, symmetrical flow fields were present in the lower furnace, whereas a deflected flow field was observed at a ratio of 1.9%. At OFA ratios of 19.1% and above, suitable horizontal airflow penetration depth was observed, and the flow fields were symmetrical. The velocities in the region were fit by linear functions, which showed that the vertical velocity of the overall airflow along the arches was linear in this section of the furnace, and that the slope of the linear function was reduced from 3.63 to 2.70 as the OFA ratio was increased, indicating that the rate of decay was reduced. Based on an overall consideration of the symmetrical flow field and appropriate airflow penetration depth, the optimal OFA ratio required for operation of this furnace is greater than 19.1%.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 51121004).
References
Belosevic, S., Beljansk, V., Tomanovic, I., Crnomarkovic, N., Tucakovic, D., and Zivanovic, T. (2012). “Numerical analysis of control by combustion modifications in pulverized coal utility boiler.” Energy Fuels, 26(1), 425–442.
Choi, C. R., and Kim, C. N. (2009). “Numerical investigation on the flow, combustion and emission characteristics in a 500 MWe tangentially fired pulverized-coal boiler.” Fuel, 88(9), 1720–1731.
Costa, M., and Azevedo, J. L. T. (2007). “Experimental characterization of an industrial pulverized coal-fired furnace under deep staging conditions.” Combust. Sci. Technol., 179(9), 1923–1935.
Costa, M., Silva, P., and Azevedo, J. L. T. (2003). “Measurements of gas species, temperature, and char burnout in a low- pulverized-coal fired utility boiler.” Combust. Sci. Technol., 175(2), 271–289.
Eberle, J. S., Garcia-Mallol, J. A., and Simmerman, R. N. (2002). “Advanced FW arch firing: reduction in central power station.” Pittsburgh Coal Conf., Coal and Slurry Technology Association.
Fang, Q. Y., Wang, H. J., Wei, Y., Lei, L., Duan, X. L., and Zhou, H. C. (2010a). “Numerical simulations of the slagging characteristics in a down-fired, pulverized-coal boiler furnace.” Fuel Process. Technol., 91(1), 88–96.
Fang, Q. Y., Wang, H. J., Zhou, H. C., Lei, L., and Duan, X. L. (2010b). “Improving the performance of a 300 MW down-fired pulverized-coal utility boiler by inclining downward the F-layer secondary air.” Energy Fuels, 24(9), 4857–4865.
Garcia-Mallol, J. A., Kukoski, A. E., and Winkin, J. P. (1999). “Anthracite firing at central power stations for the 21st century.” 16th Annual Int. Pittsburgh Coal Conf., Foster Wheeler Energy International.
Garcia-Mallol, J. A., and Morristown, N. J. (1998). “Over-fire air control system for a pulverized solid fuel furnace.” U.S. Patent No. 5,727,480.
Garcia-Mallol, J. A., Steitz, T., Chu, C. Y., and Jiang, P. Z. (2005). “Ultra-low advanced FW arch firing: Central power station applications.” 2nd U.S. China and Control Workshop, U.S. Dept. of Energy.
He, B. S., Chen, M. Q., Liu, S. M., Fan, L. J., Xu, J. Y., and Pan, W. P. (2005). “Measured vorticity distributions in a model of tangentially fired furnace.” Exp. Therm. Fluid Sci., 29(5), 537–554.
Kuang, M., Li, Z. Q., Han, Y. F., Yang, L. J., Zhu, Q. Y., and Zhang, J. (2010). “Influence of the staged-air declination angle on flow-field deflection in a down-fired pulverized-coal 300 MWe utility boiler with direct-flow split burners.” Energy Fuels, 24(3), 1603–1610.
Kuang, M., Li, Z. Q., and Zhu, Q. Y. (2013). “Evaluation on cold modeling flow field for a down-fired 600 MWe supercritical boiler with multi-injection and multi-staging: A burner location experimental optimization and its validation by real-furnace measurements.” Exp. Therm. Fluid Sci., 45, 213–220.
Li, Z. G. (1982). Similarity and modeling (theory and application), National Defence Industry Press, Beijing, China.
Li, Z. Q., Kuang, M., Zhu, Q. Y., Lai, J. P., and Zhang, Y. (2012). “Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MWe utility boiler applying a multiple-injection and multiple-staging technology: Effect of the staged-air declination angle.” Exp. Therm. Fluid Sci., 38, 184–194.
Li, Z. Q., Ren, F., Chen, Z. C., Chen, Z., and Wang, J. J. (2010a). “Influence of declivitous secondary air on combustion characteristics of a down-fired 300-MWe utility boiler.” Fuel, 89(2), 410–416.
Li, Z. Q., Ren, F., Chen, Z. C., Liu, G. K., and Xu, Z. X. (2010b). “Improved emissions and combustion characteristics for a retrofitted down-fired 300-MWe utility boiler.” Environ. Sci. Technol., 44(10), 3926–3931.
Li, Z. Q., Ren, F., Zhang, J., Zhang, X. H., Chen, Z. C., and Chen, L. Z. (2007). “Influence of vent air valve opening on combustion characteristics of a down-fired pulverized-coal 300 MWe utility boiler.” Fuel, 86(15), 2457–2462.
Liu, G. K., Zhu, Q. Y., Li, Z. Q., Zhu, X. Y., and Chen, Z. C. (2013). “New over-fire air arrangement and its air ratio optimization determined by aerodynamic characteristics in a cold small-scale model for a down-fired 660-MWe utility boiler.” Exp. Therm. Fluid Sci., 44, 475–482.
Liu, R. W., et al. (2010). “Effect of air distribution on aerodynamic field and coal combustion in an arch-fired furnace.” Energy Fuels, 24(10), 5514–5523.
Ren, F., Li, Z. Q., Chen, Z. C., Fan, S. B., and Liu, G. K. (2010). “Influence of the overfire air ratio on the emission and combustion characteristics of a down-fired 300-MWe utility boiler.” Environ. Sci. Technol., 44(16), 6510–6516.
Ren, F., Li, Z. Q., Chen, Z. C., Wang, J. J., and Chen, Z. (2009). “Influence of the down-draft secondary air on the furnace aerodynamic characteristics of a down-fired boiler.” Energy Fuels, 23(5), 2437–2443.
Ren, F., Li, Z. Q., Chen, Z. C., Xu, Z. X., and Yang, G. H. (2011). “Influence of the over-fire air angle on the flow field in a down-fired furnace determined by a cold-flow experiment.” Fuel, 90(3), 997–1003.
Ren, F., Li, Z. Q., Wang, J. J., Zhang, X. H., Chen, Z. C., and Zhang, J. W. (2008). “Influence of the adjustable vane position on the flow and combustion characteristics of a down-fired pulverized-coal 300 MWe utility boiler.” Fuel Process. Technol., 89(12), 1297–1305.
Ren, F., Li, Z. Q., Zhang, Y. B., Sun, S. Z., Zhang, X. H., and Chen, Z. C. (2007). “Influence of the secondary air-box damper opening on airflow and combustion characteristics of a down-fired 300-MWe utility boiler.” Energy Fuels, 21(2), 668–676.
Xue, S., Hui, S. E., Zhou, Q., and Xu, T. (2009). “Experimental study on emission and unburnt carbon of a radial biased swirl burner for coal combustion.” Energy Fuels, 23(7), 3558–3564.
Zhou, Y. G., Xu, T. M., Hui, S. E., and Zhang, M. C. (2009). “Experimental and numerical study on the flow fields in upper furnace for large scale tangentially fired boilers.” Appl. Therm. Eng., 29(4), 732–739.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 11, 2013
Accepted: Jan 16, 2014
Published online: Mar 28, 2014
Discussion open until: Aug 28, 2014
Published in print: Sep 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.