Experimental Evaluation of a Newly Developed Flat Plate Integrated Solar Collector System
Publication: Journal of Energy Engineering
Volume 139, Issue 1
Abstract
Because of the up-front costs of add-on solar collection systems, the cost-effectiveness of solar energy is still in doubt. Building integrated solar thermal systems may improve the cost-effectiveness of add-on collection systems given their ability to expand to cover the entire area of a roof at a reasonable cost. The objective of this study was to evaluate the effectiveness of a newly developed flat plate integrated solar collector system. The developed collector system consists of a low-temperature flat plate collector integrated within a concrete building envelope. To evaluate this system, a full-scale test prototype of the solar collector was constructed and instrumented with thermocouples. Measurements were conducted over a 7-month period in which the solar collector was evaluated over different climatic conditions. On the basis of the results of the experimental program, it was determined that the solar collector provided an efficiency ranging from 49–75% in the range of ambient temperature, solar radiation, and inlet temperature evaluated in this experiment. The estimated efficiency of the system was on the high range as compared with the reported efficiency of similar systems. Depending on the extent of the collection area, the developed solar collector can provide a significant portion of the building’s space heating and hot water needs, especially in the spring and summer seasons.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial and technical support provided by the Longwell Family Foundation, Cardinal Glass Industries, and Tiger Foam is greatly appreciated.
References
Alvarez, A., Cabeza, O., Muniz, M. C., and Varela, L. M. (2010). “Experimental and numerical investigation of a flat-plate solar collector.” Energy, 35(9), 3707–3716.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). (1986). “Methods of testing to determine the thermal performance of solar collectors.”, Atlanta.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). (1999). Handbook heating, ventilation and air conditioning applications, ASHRAE, Atlanta, 32.6–32.21.
Archibald, J. (1999). “Building integrated solar thermal roofing systems: History, current status, and future promise.” Proc., Solar 99 Conf., American Solar Energy Society (ASES), 95–100.
Bergene, T., and Lovvik, O. M. (1995). “Model calculations on a flat-plate solar heat collector with integrated solar cells.” J. Sol. Energy, 55(6), 453–462.
Duffie, J., and Beckman, W. (1980). Solar engineering of thermal processes, Wiley, New York.
Dymond, C. (2007). “When solar cookies beat conservation veggies.” Green + Solar Building Oregon, 18–19.
Hassan, M. M., and Beliveau, Y. (2007). “Design, construction and performance prediction of integrated solar roof collectors using finite element analysis.” Constr. Build. Mater., 21(5), 1069–1078.
Hassan, M. M., and Beliveau, Y. (2008). “Modeling of an integrated solar system.” J. Build. Environ., 4(5), 804–810.
Karim, M. A., and Hawlader, M. N. A. (2006). “Performance investigation of flat plate, v-corrugated and finned air collectors.” Energy, 31(4), 452–470.
Lin, W., Gao, W., and Liu, T. (2006). “A parametric study on the thermal performance of cross-corrugated solar air collectors.” Appl. Therm. Eng., 26(10), 1043–1053.
Mamlouk, M. S., and Zaniewski, J. P. (2011). Materials for civil and construction engineers, 3rd Ed., Prentice Hall, Upper Saddle River, NJ.
Melody, I. (2005). “Radiant barriers: A question and answer primer.” Florida Solar Energy Center. 〈http://www.fsec.ucf.edu/en/publications/html/FSEC-EN-15/index.htm〉 (Dec. 08, 2012).
Molero, N., Cejudo, J. M., Domínguez, F., Rodríguez, E., and Carrillo, A. (2009). “Numerical 3-D heat flux simulations on flat plate solar collectors.” Sol. Energ., 83(7), 1086–1092.
Newman, M. D. (1998). “Flat plate solar collector.” J. Renew. Energ., 13(1), 144.
Othman, M. Y., Yatim, B., Sopian, K., and Bakar, M. N. A. (2006). “Double-pass photovoltaic-thermal solar collector.” J. Energy Eng., 132(3), 121–126.
Rockwell, K. (1999). “The big picture-building solar hot water system with conventional energy efficiency.” Proc., Solar 99 Conf., American Solar Energy Society (ASES), 281–284.
Sauter, E. (1991). “Insulated concrete sandwich walls.” Exterior wall systems: Glass and concrete technology, design and construction, ASTM STP 1034, B. Donaldson, ed., ASTM, West Conshohoken, PA, 170–186.
Susheela, N., and Sharp, M. K. (2001). “Heat pipe augmented passive solar system for heating of buildings.” J. Energy Eng., 127(1), 18–36.
Vejen, N. K., Furbo, S., and Shah, L. J. (2004). “Development of solar collector panel for solar heating plants.” Sol. Energy Mater. Sol. Cells, 84(1–4), 205–223.
Zheng, G., Jing, Y., Huang, H., and Zhang, X. (2011). “Multihierarchical gray evaluation method to assess building energy conservation.” J. Energy Eng., 137(2), 88–98.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 21, 2008
Accepted: Jul 6, 2012
Published online: Aug 9, 2012
Published in print: Mar 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.