Method and Theory for Conversion of Distributed Fiber-Optic Strains to Crack Opening Displacements
Publication: Journal of Engineering Mechanics
Volume 148, Issue 12
Abstract
A new method for conversion of the distributed strain measurements to crack opening displacements (CODs) in structural elements is introduced. A hybrid approach involving theoretical and experimental strain distribution at the crack location was employed to formulate the conversion equation. The objective was to find a simple deterministic equation for practical field application that quantifies crack opening displacements directly from distributed strain measurements. The viability of the method was accomplished by experiments involving a 15-m steel beam with prefabricated flaws. A Brillouin scattering–based optical fiber sensor system was employed for distributed measurement of strains along the length of the 15-m-long beam. Two fiber Bragg grating (FBG)–based displacement sensors were also used for direct measurement of crack opening displacements at the locations of the flaws. The process involved defining and computing the bond length, which is the segment of the optical fiber affected by the presence of the crack. The distributed strain was integrated over the bond length for describing the crack opening displacements. In developing the method, it was necessary to also perform direct tension tests of the optical fiber for the acquisition of the mechanical properties. The proposed method takes into account the elastic and elastoplastic stages of deformations in the optical-fiber coating and the influence of plastic phenomena on the bond length.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data and models generated or used during the study appear in the published article.
References
Abdel-Jaber, H., and B. Glisic. 2015. “Analysis of the status of pre-release cracks in prestressed concrete structures using long-gauge sensors.” Smart Mater. Struct. 24 (2): 025038. https://doi.org/10.1088/0964-1726/24/2/025038.
Ansari, F. 2005. “Fiber optic health monitoring of civil structures using long gage and acoustic sensors.” Smart Mater. Struct. 14 (3): S1. https://doi.org/10.1088/0964-1726/14/3/001.
Ansari, F. 2007. “Practical implementation of optical fiber sensors in civil structural health monitoring.” J. Intell. Mater. Syst. Struct. 18 (8): 879–889. https://doi.org/10.1177/1045389X06075760.
Ansari, F., and Y. Libo. 1998. “Mechanics of bond and interface shear transfer in optical fiber sensors.” J. Eng. Mech. 124 (4): 385–394. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:4(385).
Babanajad, S. K., and F. Ansari. 2017. “Mechanistic quantification of microcracks from dynamic distributed sensing of strains.” J. Eng. Mech. 143 (8): 04017041. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001230.
Babanajad, S. K., Y. Zhan, T. Taylor, and F. Ansari. 2017. “Virtual reference approach for dynamic distributed sensing of damage in large structures.” J. Aerosp. Eng. 30 (2): B4016011 . https://doi.org/10.1061/(ASCE)AS.1943-5525.0000669.
Bao, C., H. Hao, and Z.-X. Li. 2013a. “Multi-stage identification scheme for detecting damage in structures under ambient excitations.” Smart Mater. Struct. 22 (4): 045006. https://doi.org/10.1088/0964-1726/22/4/045006.
Bao, P., M. Yuan, S. Dong, H. Song, and J. Xue. 2013b. “Fiber Bragg grating sensor fatigue crack real-time monitoring based on spectrum cross-correlation analysis.” J. Sound Vib. 332 (1): 43–57. https://doi.org/10.1016/j.jsv.2012.07.049.
Bao, X. 2009. “Optical fiber sensors based on Brillouin scattering.” Opt. Photonics News 20 (9): 40–45. https://doi.org/10.1364/OPN.20.9.000040.
Barry, D. A., P. J. Culligan-Hensley, and S. J. Barry. 1995. “Real values of the W-function.” ACM Trans. Math. Software 21 (2): 161–171. https://doi.org/10.1145/203082.203084.
Barry, D. A., J. Y. Parlange, L. Li, H. Prommer, C. J. Cunningham, and F. Stagnitti. 2000. “Analytical approximations for real values of the Lambert -function.” Math. Comput. Simul. 53 (1–2): 95–103. https://doi.org/10.1016/S0378-4754(00)00172-5.
Bassam, A., A. Iranmanesh, and F. Ansari. 2011. “A simple quantitative approach for post earthquake damage assessment of flexure dominant reinforced concrete bridges.” Eng. Struct. 33 (12): 3218–3225. https://doi.org/10.1016/j.engstruct.2011.06.024.
Biau, G., and E. Scornet. 2016. “A random forest guided tour.” Test 25 (2): 197–227. https://doi.org/10.1007/s11749-016-0481-7.
Brault, A., and N. Hoult. 2019. “Monitoring reinforced concrete serviceability performance using fiber-optic sensors.” ACI Struct. J. 116 (1): 57–70. https://doi.org/10.14359/51710870.
Brault, A., N. A. Hoult, T. Greenough, and I. Trudeau. 2019. “Monitoring of beams in an RC building during a load test using distributed sensors.” J. Perform. Constr. Facil. 33 (1): 04018096. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001250.
Breiman, L. 2001. “Random forest.” Mach. Learn. 45 (Aug): 5–32. https://doi.org/10.1023/A:1010933404324.
Breiman, L. 2003. Manual on setting up, using, and understanding random forest V3.1. https://www.berkeley.edu/~breiman/Using_random_forests_V3.1pdf.
Chen, G. D., S. S. Sun, D. Pommerenke, J. L. Drewniak, G. G. Greene, R. D. McDaniel, A. Belarbi, and H. M. Mu. 2005. “Crack detection of a full-scale reinforced concrete girder with a distributed cable.” Smart Mater. Struct. 14 (3): 88–97. https://doi.org/10.1088/0964-1726/14/3/011.
Corless, R. M., G. H. Gonnet, D. E. G. Hare, D. J. Jeffrey, and D. E. Knuth. 1996. “On the Lambert function.” Adv. Comput. Math. 5 (1): 329–359. https://doi.org/10.1007/BF02124750.
Dellenbaugh, L., X. Kong, H. Al-Salih, W. Collins, C. Bennett, J. Li, and E. J. Sutley. 2020. “Development of a distortion-induced fatigue crack characterization methodology using digital image correlation.” J. Bridge Eng. 25 (9): 04020063. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001598.
Domaneschi, M., C. Pellecchia, E. De Iuliis, G. P. Cimellaro, M. Morgese, A. A. Khalil, and F. Ansari. 2020. “Collapse analysis of the Polcevera viaduct by the applied element method.” Eng. Struct. 214 (Jul): 110659. https://doi.org/10.1016/j.engstruct.2020.110659.
Dutton, M., W. A. Take, and N. A. Hoult. 2014. “Curvature monitoring of beams using digital image correlation.” J. Bridge Eng. 19 (3): 05013001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000538.
Feng, X., J. Zhou, C. Sun, X. Zhang, and F. Ansari. 2013. “Theoretical and experimental investigations into crack detection with BOTDR–distributed fiber optic sensors.” J. Eng. Mech. 139 (12): 1797–1807. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000622.
Jiawei, H., M. Kamber, and J. Pei. 2012. Data mining: Concepts and technique. New York: Elsevier.
Kishida, K., H. Zhang, C.-H. Li, A. Guzik, H. Suzuki, and Z. Wu. 2005. “Diagnostic of corrosion-based thinning in steam pipelines by means of Neubrescope high precision optical fiber sensing system.” In Proc., 5th Int. Workshop on Structural Health Monitoring. Lancaster, PA: DEStech Publications http://www.sh-ashiya.com/produce/e_paper_SHM_2005_Stanford_pipeline_thinning.pdf.
Liu, R. M., S. K. Babanajad, T. Taylor, and F. Ansari. 2015. “Experimental study on structural defect detection by monitoring distributed dynamic strain.” Smart Mater. Struct. 24 (11): 115038. https://doi.org/10.1088/0964-1726/24/11/115038.
Luo, P., D. Zhang, L. Wang, and D. Jiang. 2010. “Structural damage detection based on a fiber Bragg grating sensing array and a back propagation neural network: An experimental study.” Struct. Health Monit. 9 (1): 5–11. https://doi.org/10.1177/1475921709349896.
Meng, D., and F. Ansari. 2016. “Interference and differentiation of the neighboring surface microcracks in distributed sensing with PPP-BOTDA.” Appl. Opt. 55 (34): 9782. https://doi.org/10.1364/AO.55.009782.
Meng, D., F. Ansari, and X. Feng. 2015. “Detection and monitoring of surface micro-cracks by PPP-BOTDA.” Appl. Opt. 54 (16): 4972. https://doi.org/10.1364/AO.54.004972.
Michaud, K., N. Hoult, A. Lotfy, and P. Lum. 2016. “Performance in shear of reinforced concrete slabs containing recycled concrete aggregate.” Mater. Struct. 49 (10): 4425–4438. https://doi.org/10.1617/s11527-016-0798-4.
Morgese, M., F. Ansari, M. Domaneschi, and G. P. Cimellaro. 2020. “Post-collapse analysis of Morandi’s Polcevera viaduct in Genoa Italy.” J. Civ. Struct. Health Monit. 10 (1): 69–85. https://doi.org/10.1007/s13349-019-00370-7.
Morgese, M., M. Domaneschi, F. Ansari, G. Paolo Cimellaro, and D. Inaudi. 2021. “Improving distributed fiber-optic sensor measures by digital image correlation: Two-stage structural health monitoring.” ACI Struct. J. 118 (6): 91–102.
Motamedi, M., X. Feng, X. Zhang, C. Sun, and F. Ansari. 2013. “Quantitative investigation in distributed sensing of structural defects with Brillouin optical time domain reflectometry.” J. Intell. Mater. Syst. Struct. 24 (10): 1187–1196. https://doi.org/10.1177/1045389X12470309.
Rodriguez, G., J. R. Casas, and S. Villalba. 2019. “Shear crack width assessment in concrete structures by 2D distributed optical fiber.” Eng. Struct. 195 (May): 508–523. https://doi.org/10.1016/j.engstruct.2019.05.079.
Rodríguez, G., J. R. Casas, and S. Villaba. 2015. “Cracking assessment in concrete structures by distributed optical fiber.” Smart Mater. Struct. 24 (3): 035005. https://doi.org/10.1088/0964-1726/24/3/035005.
Song, Q., E. Abdoli Oskoui, T. Taylor, and F. Ansari. 2019. “Visual saliency–based image binarization approach for detection of surface microcracks by distributed optical fiber sensors.” Struct. Health Monit. 18 (5–6): 1590–1601. https://doi.org/10.1177/1475921718797323.
Song, Q., Y. Chen, E. Abdoli Oskoui, Z. Fang, T. Taylor, G. Tang, X. Zhao, and F. Ansari. 2020a. “Micro-crack detection method of steel beam surface using stacked autoencoders on massive full-scale sensing strains.” Struct. Health Monit. 19 (4): 1175–1187. https://doi.org/10.1177/1475921719879965.
Song, Q., G. Yan, G. Tang, and F. Ansari. 2021. “Robust principal component analysis and support vector machine for detection of microcracks with distributed optical fiber sensors.” Mech. Syst. Sig. Process. 146 (Jun): 107019. https://doi.org/10.1016/j.ymssp.2020.107019.
Song, Q., C. Zhang, G. Tang, and F. Ansari. 2020b. “Deep learning method for detection of structural microcracks by Brillouin scattering based distributed optical fiber sensors.” Smart Mater. Struct. 29 (7): 100456. https://doi.org/10.1088/1361-665X/ab874e.
Tan, X., A. Abu-Obeidah, Y. Bao, H. Nassif, and W. Nasreddine. 2021. “Measurement and visualization of strains and cracks in CFRP post-tensioned fiber reinforced concrete beams using distributed fiber optic sensors.” Autom. Constr. 124 (Nov): 103604. https://doi.org/10.1016/j.autcon.2021.103604.
Tan, X., and Y. Bao. 2021. “Measuring crack width using a distributed fiber optic sensor based on optical frequency domain reflectometry.” Measurement 172 (Dec): 108945. https://doi.org/10.1016/j.measurement.2020.108945.
Tran, Q. T., A. Toumi, and J.-L. Granju. 2006. “Experimental and numerical investigation of the debonding interface between an old concrete and an overlay.” Mater. Struct. 39 (287): 379–389. https://doi.org/10.1617/s11527-005-9051-2.
Yamauchi, Y., A. Guzik, K. Kishida, and C. Li. 2007. “A study of the stability, reliability, and accuracy of Neubrescope-based pipe thinning detection system.” In Proc., 3rd Int. Conf. on Structural Health Monitoring of Intelligent Infrastructure. Kobe, Japan: Neubrex. https://www.researchgate.net/profile/Artur-Guzik/publication/237435399_A_STUDY_OF_THE_STABILITY_RELIABILITY_AND_ACCURACY_OF_NEUBRESCOPE-BASED_PIPE_THINNING_DETECTION_SYSTEM/links/53fdbc1e0cf2dca8000373ed/A-STUDY-OF-THE-STABILITY-RELIABILITY-AND-ACCURACY-OF-NEUBRESCOPE-BASED-PIPE-THINNING-DETECTION-SYSTEM.pdf.
Yan, M., X. Tan, S. Mahjoubi, and Y. Bao. 2022. “Automation in construction strain transfer effect on measurements with distributed fiber optic sensors.” Autom. Constr. 139 (Mar): 104262. https://doi.org/10.1016/j.autcon.2022.104262.
Yuan, L., and F. Ansari. 1998. “Embedded white light interferometer fibre optic strain sensor for monitoring crack-tip opening in concrete beams.” Meas. Sci. Tech. 9 (2): 261–266. https://doi.org/10.1088/0957-0233/9/2/014.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 8, 2022
Accepted: Jul 31, 2022
Published online: Sep 26, 2022
Published in print: Dec 1, 2022
Discussion open until: Feb 26, 2023
ASCE Technical Topics:
- Beams
- Bonding
- Building materials
- Continuum mechanics
- Cracking
- Displacement (mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Fabrics
- Fracture mechanics
- Material mechanics
- Materials engineering
- Materials processing
- Measurement (by type)
- Sensors and sensing
- Solid mechanics
- Steel beams
- Strain
- Structural engineering
- Structural mechanics
- Structural members
- Structural systems
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Tao Jiang, Jingwen Zhu, Yanpei Gao, Liang Ren, Chunxu Qu, Dongsheng Li, Shape Reconstruction of a Timoshenko Beam under the Geometric Nonlinearity Condition, Journal of Engineering Mechanics, 10.1061/JENMDT.EMENG-7097, 149, 6, (2023).
- Maurizio Morgese, Chengwei Wang, Yu Ying, Todd Taylor, Farhad Ansari, Stress–Strain Response of Optical Fibers in Direct Tension, Journal of Engineering Mechanics, 10.1061/JENMDT.EMENG-6990, 149, 7, (2023).