Mechanical Behavior of Shape-Memory Alloy Triply Periodic Minimal Surface Foam Based on Schwarz Primitive
Publication: Journal of Engineering Mechanics
Volume 148, Issue 9
Abstract
This work investigated the effective structural and functional behavior of shape-memory alloy (SMA)-based triply periodic minimal surface foams based on the Schwarz primitive (P-foams) using finite-element analysis (FEA) and numerical homogenization methods. The effect of relative density and applied temperature on the homogenized mechanical behavior of the SMA foam, including its superelasticity, and the evolution of the effective martensite volume fraction with the applied load was investigated considering axial and shear loading cases. In contrast to dense SMA, the effective martensite volume fraction in the considered foam was found to vary exponentially with the strain in the case of monotonic loading, asymptotically approaching 1 as the strain increased indefinitely. Moreover, the effective superelasticity of the SMA P-foam was found to be facilitated by decreased temperature and relative density. The onset of phase transformation for the P-foam under various loading scenarios was shown to be well approximated using an extended Hill loading surface.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Dr. Wael Zaki acknowledges the financial support of Khalifa University of Science and Technology through Grant No. CIRA-2019-024.
References
Abueidda, D. W., R. K. A. Al-Rub, A. S. Dalaq, D.-W. Lee, K. A. Khan, and I. Jasiuk. 2016. “Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces.” Mech. Mater. 95 (Apr): 102–115. https://doi.org/10.1016/j.mechmat.2016.01.004.
Al-Ketan, O., and P. K. Abu Al-Rub. 2019. “Multifunctional mechanical metamaterials based on triply periodic minimal surface lattices.” Adv. Eng. Mater. 21 (10): 1900524. https://doi.org/10.1002/adem.201900524.
Al-Ketan, O., R. Rowshan, and R. K. Abu Al-Rub. 2018. “Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials.” Addit. Manuf. 19 (Jan): 167–183. https://doi.org/10.1016/j.addma.2017.12.006.
Arsentev, M. Y., S. V. Balabanov, A. I. Makogon, and M. M. Sychev. 2019. “Experimental and theoretical studies of the mechanical properties of 3D printed polyamide products of the Schwarz primitive topology.” Glass Phys. Chem. 45 (6): 599–602. https://doi.org/10.1134/S1087659619060026.
Brakke, K. A. 1992. “The surface evolver.” Exp. Math. 1 (2): 141–165. https://doi.org/10.1080/10586458.1992.10504253.
Casciati, S., and L. Faravelli. 2008. “Structural components in shape memory alloy for localized energy dissipation.” Compos. Struct. 86 (3–5): 330–339. https://doi.org/10.1016/j.compstruc.2007.01.037.
Deshpande, V. S., N. A. Fleck, and M. F. Ashby. 2001. “Effective properties of the octet-truss lattice material.” J. Mech. Phys. Solids 49 (8): 1747–1769. https://doi.org/10.1016/S0022-5096(01)00010-2.
Guest, J. K., and J. H. Prévost. 2007. “Design of maximum permeability material structures.” Comput. Methods Appl. Mech. Eng. 196 (4–6): 1006–1017. https://doi.org/10.1016/j.cma.2006.08.006.
Hibbit, H., B. Karlsson, and E. Sorensen. 2012. ABAQUS user manual, version 6.12. Providence, RI: Simulia.
Jani, J. A., M. Leary, A. Subic, and M. A. Gibson. 2014. “A review of shape memory alloy research, applications and opportunities.” Mater. Des. 56 (Apr): 1078–1113. https://doi.org/10.1016/j.matdes.2013.11.084.
Jung, Y., and S. Torquato. 2005. “Fluid permeabilities of triply periodic minimal surfaces.” Phys. Rev. E 72 (5): 056319. https://doi.org/10.1103/PhysRevE.72.056319.
Kadkhodapour, J., H. Montazerian, and S. Raeisi. 2014. “Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure.” Mater. Sci. Eng., C 43 (Oct): 587–597. https://doi.org/10.1016/j.msec.2014.07.047.
Klinowski, J., A. L. Mackay, and H. Terrones. 1996. “Curved surfaces in chemical structure.” Philos. Trans. R. Soc. London, Ser. A 354 (1715): 1975–1987. https://doi.org/10.1098/rsta.1996.0086.
Lee, D.-W., K. A. Khan, and R. K. A. Al-Rub. 2017. “Stiffness and yield Strength of architectured foams based on the Schwarz Primitive triply periodic minimal surface.” Int. J. Plast. 95 (Aug): 1–20. https://doi.org/10.1016/j.ijplas.2017.03.005.
Lee, M. G., J. W. Lee, S. C. Han, and K. Kang. 2016a. “Mechanical analyses of ‘Shellular’, an ultralow-density material.” Acta Mater. 103 (Jan): 595–607. https://doi.org/10.1016/j.actamat.2015.10.040.
Lee, W., D.-Y. Kang, J. Song, J. H. Moon, and D. Kim. 2016b. “Controlled unusual stiffness of mechanical metamaterials.” Sci. Rep. 6 (1): 1–7. https://doi.org/10.1038/srep20312.
Mahtabi, M. J., N. Shamsaei, and M. R. Mitchell. 2015. “Fatigue of Nitinol: The state-of-the-art and ongoing challenges.” J. Mech. Behav. Biomed. Mater. 50 (Oct): 228–254. https://doi.org/10.1016/j.jmbbm.2015.06.010.
Milošev, I., and B. Kapun. 2012. “The corrosion resistance of Nitinol alloy in simulated physiological solutions: Part 1: The effect of surface preparation.” Mater. Sci. Eng., C 32 (5): 1087–1096. https://doi.org/10.1016/j.msec.2011.11.007.
Ohno, N., K. Ikenoya, D. Okumura, and T. Matsuda. 2012. “Homogenized elastic–viscoplastic behavior of anisotropic open-porous bodies with pore pressure.” Int. J. Solids Struct. 49 (19–20): 2799–2806. https://doi.org/10.1016/j.ijsolstr.2012.02.014.
Rajagopalan, S., and R. A. Robb. 2006. “Schwarz meets Schwann: Design and fabrication of biomorphic and durataxic tissue engineering scaffolds.” Med. Image Anal. 10 (5): 693–712. https://doi.org/10.1016/j.media.2006.06.001.
Ryhänen, J., E. Niemi, W. Serlo, E. Niemelä, P. Sandvik, H. Pernu, and T. Salo. 1997. “Biocompatibility of nickel-titanium shape memory metal and its corrosion behavior in human cell cultures.” J. Biomed. Mater. Res. 35 (4): 451–457. https://doi.org/10.1002/(SICI)1097-4636(19970615)35:4%3C451::AID-JBM5%3E3.0.CO;2-G.
Saghaian, S. E., A. Amerinatanzi, N. S. Moghaddam, A. Majumdar, M. Nematollahi, S. Saedi, M. Elahinia, and H. E. Karaca. 2018. “Mechanical and shape memory properties of triply periodic minimal surface (TPMS) NiTi structures fabricated by selective laser melting.” Biol. Eng. Med. 3 (5): 1–7. https://doi.org/10.15761/BEM.1000152.
Shaw, J., and S. Kyriakides. 1995. “Thermomechanical aspects of NiTi.” J. Mech. Phys. Solids 43 (8): 1243–1281. https://doi.org/10.1016/0022-5096(95)00024-D.
Shin, J., S. Kim, D. Jeong, H. G. Lee, D. Lee, J. Y. Lim, and J. Kim. 2012. “Finite element analysis of Schwarz P surface pore geometries for tissue-engineered scaffolds.” Math. Probl. Eng. 2012: 1–13. https://doi.org/10.1155/2012/694194.
Speirs, M., B. Van Hooreweder, J. Van Humbeeck, and J.-P. Kruth. 2017. “Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison.” J. Mech. Behav. Biomed. Mater. 70 (Jun): 53–59. https://doi.org/10.1016/j.jmbbm.2017.01.016.
Torquato, S., and A. Donev. 2004. “Minimal surfaces and multifunctionality.” Proc. R. Soc. London, Ser. A 460 (2047): 1849–1856. https://doi.org/10.1098/rspa.2003.1269.
Torquato, S., S. Hyun, and A. Donev. 2002. “Multifunctional composites: Optimizing microstructures for simultaneous transport of heat and electricity.” Phys. Rev. Lett. 89 (26): 266601. https://doi.org/10.1103/PhysRevLett.89.266601.
Torquato, S., S. Hyun, and A. Donev. 2003. “Optimal design of manufacturable three-dimensional composites with multifunctional characteristics.” J. Appl. Phys. 94 (9): 5748–5755. https://doi.org/10.1063/1.1611631.
Van Viet, N., W. Zaki, and R. Umer. 2018. “Analytical model for a superelastic Timoshenko shape memory alloy beam subjected to a loading–unloading cycle.” J. Intell. Mater. Syst. Struct. 29 (20): 3902–3922. https://doi.org/10.1177/1045389X18799497.
Viet, N. V., and W. Zaki. 2019. “Analytical investigation of the behavior of concrete beams reinforced with multiple circular superelastic shape memory alloy bars.” Compos. Struct. 210 (Feb): 958–970. https://doi.org/10.1016/j.compstruct.2018.11.080.
Zaki, W., and Z. Moumni. 2007. “A three-dimensional model of the thermomechanical behavior of shape memory alloys.” J. Mech. Phys. Solids 55 (11): 2455–2490. https://doi.org/10.1016/j.jmps.2007.03.012.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 15, 2021
Accepted: Apr 7, 2022
Published online: Jul 7, 2022
Published in print: Sep 1, 2022
Discussion open until: Dec 7, 2022
ASCE Technical Topics:
- Alloys
- Axial loads
- Design (by type)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Finite element method
- Foaming (material)
- Load factors
- Material mechanics
- Material properties
- Materials engineering
- Materials processing
- Mechanical properties
- Metals (material)
- Methodology (by type)
- Numerical methods
- Smart materials
- Static loads
- Statics (mechanics)
- Structural behavior
- Structural design
- Structural engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Nguyen Van Viet, Waqas Waheed, Anas Alazzam, Wael Zaki, A Deep Artificial Neural Network Model for Predicting the Mechanical Behavior of Triply Periodic Minimal Surfaces under Damage Loading, Journal of Engineering Mechanics, 10.1061/JENMDT.EMENG-7511, 150, 7, (2024).
- Ali N. Alagha, Viet Nguyen, Wael Zaki, Effective phase transformation behavior of NiTi triply periodic minimal surface architectures, Journal of Intelligent Material Systems and Structures, 10.1177/1045389X221115704, (1045389X2211157), (2022).