Smooth Hysteretic Formulation for Damage Modeling
Publication: Journal of Engineering Mechanics
Volume 147, Issue 9
Abstract
A smooth hysteretic formulation for modeling of damage is presented, emanating from damage mechanics and classical theory of plasticity. This generalized smooth, rate-independent three-dimensional (3D) Bouc–Wen type model is intended for nonlinear static and dynamic analysis of structures and is expressed in tensorial form. The hysteretic model embodies the modified von Mises yield criterion that takes into account damage evolution and nonlinear hardening laws. Based on these considerations, elastic finite elements are extended considering the plastic strains as additional hysteretic degrees of freedom together with the variables for damage and isotropic hardening as well as the back-stresses. These variables are considered at the integration points of the finite elements, and their evolution is described by the Bouc–Wen-type equations. The developed hysteretic finite element allows for geometric nonlinear analysis, assuming small strains. Numerical examples are presented, attesting to the generality of the proposed approach as well as the efficacy and accuracy.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
References
ADINA. 2012. Theory and modeling guide volume I: ADINA solids and structures. Watertown, NY: ADINA R&D.
Andriotis, C., I. Gkimousis, and V. Koumousis. 2016. “Modeling reinforced concrete structures using smooth plasticity and damage models.” J. Struct. Eng. 142 (2): 04015105. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001365.
Bathe, K. J. 1996. Finite element procedures. Hoboken, NJ: Prentice Hall.
Bouc, R. 1967. “Forced vibration of mechanical system with hysteresis.” In Proc., 4th Conf. on Nonlinear Oscillations. Prague, Czechoslovakia: Academia.
Carlson, D. E., and A. Hoger. 1986. “The derivative of a tensor-valued function of a tensor.” Q. Appl. Math. 44 (3): 409–423. https://doi.org/10.1090/qam/860894.
Chaboche, J. L. 1984. “Anisotropic creep damage in the framework of continuum damage mechanics.” Nucl. Eng. Des. 79 (3): 309–319. https://doi.org/10.1016/0029-5493(84)90046-3.
Chaboche, J. L. 1988a. “Continuum damage mechanics. Part I: General concepts.” J. Appl. Mech. 55 (1): 59–64. https://doi.org/10.1115/1.3173661.
Chaboche, J. L. 1988b. “Continuum damage mechanics. Part II: Damage growth, crack initiation, and crack growth.” J. Appl. Mech. 55 (1): 65–72. https://doi.org/10.1115/1.3173662.
Chaboche, J. L. 1993. “Development of continuum damage mechanics for elastic solids sustaining anisotropic and unilateral damage.” Int. J. Damage Mech. 2 (4): 311–329. https://doi.org/10.1177/105678959300200401.
Chaboche, J.-L. 1981. “Continuous damage mechanics: A tool to describe phenomena before crack initiation.” Nucl. Eng. Des. 64 (2): 233–247. https://doi.org/10.1016/0029-5493(81)90007-8.
Charalampakis, A. E., and V. K. Koumousis. 2009. “A Bouc–Wen model compatible with plasticity postulates.” J. Sound Vib. 322 (4–5): 954–968. https://doi.org/10.1016/j.jsv.2008.11.017.
Chow, C. L., and J. Wang. 1988. “A finite element analysis of continuum damage mechanics for ductile fracture.” Int. J. Fract. 38: 83–102. https://doi.org/10.1007/BF00033000.
Christos, S. D., and K. K. Vlasis. 2017. “Plane stress problems using hysteretic rigid body spring network models.” Comput. Part. Mech. 4 (4): 429–439. https://doi.org/10.1007/s40571-016-0128-1.
Cordebois, J. P., and F. Sidoroff. 1982. “Damage induced elastic anisotropy.” In Mechanical behavior of anisotropic solids/comportment méchanique des solides anisotropes, 761–774. Dordrecht, Netherlands: Springer.
de Souza Neto, E. A., D. Peri, and D. R. J. Owen. 2008. “Computational methods for plasticity.” In Computational methods for plasticity-theory and applications. Chichester, UK: Wiley.
Erlicher, S., and N. Point. 2004. “Thermodynamic admissibility of Bouc–Wen type hysteresis models.” C.R. Méc. 332 (1): 51–57. https://doi.org/10.1016/j.crme.2003.10.009.
Gkimousis, I., and V. Koumousis. 2018. “Modeling RC column flexural failure modes under intensive seismic loading.” Earthq. Eng. Struct. Dyn. 47 (9): 1942–1962. https://doi.org/10.1002/eqe.3050.
Kachanov, L. 1958. “Time of the rupture process under creep conditions.” Izvestiia Akademii Nauk SSSR, Otdelenie Teckhnicheskikh Nauk 8: 26–31.
Kachanov, L. M. 1986. “Introduction to continuum damage mechanics.” In Mechanics of elastic stability. Dordrecht, Netherlands: Springer.
Kottari, A. K., A. E. Charalampakis, and V. K. Koumousis. 2014. “A consistent degrading Bouc–Wen model.” Eng. Struct. 60 (Feb): 235–240. https://doi.org/10.1016/j.engstruct.2013.12.025.
Krajcinovic, D. 1996. Damage mechanics. Amsterdam, Netherlands: Elsevier.
Krajcinovic, D., and J. Lemaitre. 1987. Continuum damage mechanics theory and application. Vienna, Austria: Springer.
Lemaitre, J. 1985a. “A continuous damage mechanics model for ductile fracture.” J Eng Mater Technol 107 (1): 83–89. https://doi.org/10.1115/1.3225775.
Lemaitre, J. 1985b. “Coupled elasto-plasticity and damage constitutive equations.” Comput. Methods Appl. Mech. Eng. 51 (1–3): 31–49. https://doi.org/10.1016/0045-7825(85)90026-X.
Lemaitre, J., and J.-L. Chaboche. 1990. Mechanics of solid materials. Cambridge, UK: Cambridge University Press.
Lemaitre, J., and R. Desmorat. 2005. Engineering damage mechanics. Berlin: Springer.
Lemaitre, J., R. Desmorat, and M. Sauzay. 2000. “Anisotropic damage law of evolution.” Eur. J. Mech. A. Solids 19 (2): 187–208. https://doi.org/10.1016/S0997-7538(00)00161-3.
Moysidis, A. N., and V. K. Koumousis. 2015. “Hysteretic plate finite element.” J. Eng. Mech. 141 (10): 04015039. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000918.
Moysidis, A. N., and V. K. Koumousis. 2019. “Hysteretic shell finite element.” J. Eng. Mech. 145 (5): 04019027. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001589.
Murakami, S. 2012. “Continuum damage mechanics.” In Solid mechanics and its applications. Dordrecht, Netherlands: Springer.
Radhakrishnan, K., and A. C. Hindmarsh. 1993. Description and use of LSODE, the Livermore solver for ordinary differential equations. Washington, DC: National Aeronautics and Space Administration.
Reese, S., T. Brepols, M. Fassin, L. Poggenpohl, and S. Wulfinghoff. 2021. “Using structural tensors for inelastic material modeling in the finite strain regime: A novel approach to anisotropic damage.” J. Mech. Phys. Solids 146 (Jan): 104174. https://doi.org/10.1016/j.jmps.2020.104174.
Sivaselvan, M. V., and A. M. Reinhorn. 2000. “Hysteretic models for deteriorating inelastic structures.” J. Eng. Mech. 126 (6): 633–640. https://doi.org/10.1061/%28ASCE%290733-9399%282000%29126%3A6%28633%29.
Skrzypek, J. J., and A. Ganczarski. 1999. “Modeling of material damage and failure of structures.” In Foundations of engineering mechanics. Berlin: Springer.
Sofianos, C. D., and V. K. Koumousis. 2018. “Hysteretic beam element with degrading smooth models.” Arch. Appl. Mech. 88 (1–2): 253–269. https://doi.org/10.1007/s00419-017-1263-8.
Sofianos, C. D., and V. K. Koumousis. 2019. “Hysteretic behavior using the explicit material point method.” Comput. Part. Mech. 6 (1): 11–28. https://doi.org/10.1007/s40571-018-0195-6.
Triantafyllou, S. P., and V. K. Koumousis. 2011. “An inelastic Timoshenko beam element with axial–shear–flexural interaction.” Comput. Mech. 48 (6): 713–727. https://doi.org/10.1007/s00466-011-0616-3.
Triantafyllou, S. P., and V. K. Koumousis. 2012. “An hysteretic quadrilateral plane stress element.” Arch. Appl. Mech. 82 (10–11): 1675–1687. https://doi.org/10.1007/s00419-012-0682-9.
Triantafyllou, S. P., and V. K. Koumousis. 2014. “Hysteretic finite elements for the nonlinear static and dynamic analysis of structures.” J. Eng. Mech. 140 (6): 04014025. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000699.
Voyiadjis, G., and P. Kattan. 2005. Damage mechanics. Boca Raton, FL: CRC Press.
Voyiadjis, G. Z. 2015. Handbook of damage mechanics: Nano to macro scale for materials and structures. New York: Springer.
Voyiadjis, G. Z., C. Oucif, P. I. Kattan, and T. Rabczuk. 2020. “Damage and healing mechanics in plane stress, plane strain, and isotropic elasticity.” Int. J. Damage Mech. 29 (8): 1246–1270. https://doi.org/10.1177/1056789520905347.
Voyiadjis, G. Z., and P. Woelke. 2008. Elasto-plastic and damage analysis of plates and shells. Berlin: Springer.
Wen, Y.-K. 1976. “Method for random vibration of hysteretic systems.” J. Eng. Mech. Div. 102 (2): 249–263. https://doi.org/10.1061/JMCEA3.0002106.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 10, 2020
Accepted: Apr 26, 2021
Published online: Jul 15, 2021
Published in print: Sep 1, 2021
Discussion open until: Dec 15, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.