Influence of Negative Stiffness Damper on Stay Cable with Neoprene Rubber Bushings
Publication: Journal of Engineering Mechanics
Volume 147, Issue 7
Abstract
Stay cables on cable-stayed bridges are inherently low-damped flexible structural members. In order to improve their energy-dissipating capacities, external dampers are installed to control undesired cable vibrations. Typically, external dampers are mounted near the cable anchorage and their performance reduced in the case of longer cables. In addition to this, damper performance is also reduced by the presence of neoprene rubber bushings, which are provided to reduce the bending stresses due to live loadings. In this study, a concept of negative stiffness in an external damper is suggested to improve the damping of stay cables equipped with rubber bushings. An analytical approach is used to explore the modal behavior of a cable-damper system mounted with neoprene rubber bushings. The solution is expressed in the approximate (asymptotic approach) as well as the exact approach. An expression for effective damper location and design damping curves are proposed for the benefit of designers and researchers. The lower-bound limit of a negative-stiffness damper is also derived, and its effect on damper performance is explored. Damping contour plots are developed to select the required level of damping from the available system parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request, which include the (1) MATLAB code used to compute modal damping ratios, and (2) MATLAB code used to plot different figures.
Acknowledgments
The author is grateful to the FAST National University of Computer and Emerging Sciences Faculty Research Support Grant for supporting this project.
References
Ahmad, J., S. Cheng, and F. Ghrib. 2016a. “Effect of the number of cross-tie lines on the in-plane stiffness and modal behavior classification of orthogonal cable networks with multiple lines of transverse flexible cross-ties.” J. Eng. Mech. 142 (4): 04015106. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001008.
Ahmad, J., S. Cheng, and F. Ghrib. 2016b. “Impact of cross-tie design on the in-plane stiffness and local mode formation of cable networks on cable-stayed bridges.” J. Sound Vib. 363 (Feb): 141–155. https://doi.org/10.1016/j.jsv.2015.09.052.
Ahmad, J., S. Cheng, and F. Ghrib. 2018. “Generalized approach for the formulation of analytical model of hybrid cable networks.” J. Eng. Mech. 144 (6): 04018035. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001455.
Argentini, T., L. Rosa, and A. Zasso. 2016. “Wind-induced vibrations of the stay cables of a roundabout flyover: Assessment, repair, and countermeasures.” J. Perform. Constr. Facil. 30 (6): 04016046. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000897.
Caracoglia, L., and N. P. Jones. 2005. “In-plane dynamic behavior of cable networks. Part 2: Prototype prediction and validation.” J. Sound Vib. 279 (3–5): 993–1014. https://doi.org/10.1016/j.jsv.2003.11.059.
Caracoglia, L., and N. P. Jones. 2007. “Damping of taut-cable systems: Two dampers on a single stay.” J. Eng. Mech. 133 (10): 1050–1060. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:10(1050).
Caracoglia, L., and D. Zuo. 2009. “Effectiveness of cable networks of various configurations in suppressing stay-cable vibration.” Eng. Struct. 31 (12): 2851–2864. https://doi.org/10.1016/j.engstruct.2009.07.012.
Casas, J. R., and A. C. Aparicio. 2010. “Rain–wind-induced cable vibrations in the Alamillo cable-stayed bridge (Sevilla, Spain). Assessment and remedial action.” Struct. Infrastruct. Eng. 6 (5): 549–556. https://doi.org/10.1080/15732470903068607.
Fujino, Y., and N. Hoang. 2008. “Design formulas for damping of a stay cable with a damper.” J. Struct. Eng. 134 (2): 269–278. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(269).
Irvine, H. M. 1981. Cable structures. Cambridge, MA: MIT Press.
Javanbakht, M., S. Cheng, and F. Ghrib. 2018. “Refined damper design formula for a cable equipped with a positive or negative stiffness damper.” Struct. Control Health Monit. 25 (10): e2236. https://doi.org/10.1002/stc.2236.
Krenk, S. 2000. “Vibrations of a taut cable with an external damper.” J. Appl. Mech. 67 (4): 772–776. https://doi.org/10.1115/1.1322037.
Krenk, S., and S. R. Nielsen. 2002. “Vibrations of a shallow cable with a viscous damper.” Proc. R. Soc. London, Ser. A 458 (2018): 339–357. https://doi.org/10.1098/rspa.2001.0879.
Lan, C., A. Chen, and R. Ma. 2009. “Effects of stay cable properties on damper effectiveness in cable-damper system.” In Proc., 8th Int. Symp. on Cable Dynamics, 317–324. Liege, Belgium: Association des Ingenieurs Electriciens sortis de l’Institut Montefiore.
Main, J. A., and N. P. Jones. 2003. “Influence of rubber bushings on stay-cable damper effectiveness.” In Proc., 5th Int. Symp. on Cable Dynamics, 445–452. Berlin: Springer.
Pacheco, B. M., Y. Fujino, and A. Sulekh. 1993. “Estimation curve for modal damping in stay cables with viscous damper.” J. Struct. Eng. 119 (6): 1961–1979. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1961).
Shi, X., S. Zhu, J. Y. Li, and B. F. Spencer. 2016. “Dynamic behavior of stay cables with passive negative stiffness dampers.” Smart Mater. Struct. 25 (7): 075044. https://doi.org/10.1088/0964-1726/25/7/075044.
Shi, X., S. Zhu, J. Y. Li, and B. F. Spencer. 2017. “Experimental study on passive negative stiffness damper for cable vibration mitigation.” J. Eng. Mech. 143 (9): 04017070. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001289.
Takano, H., M. Ogasawara, N. Ito, T. Shimosato, K. Takeda, and T. Murakami. 1997. “Vibrational damper for cables of the Tsurumi Tsubasa Bridge.” J. Wind Eng. Ind. Aerodyn. 69–71 (Jul–Oct): 807–818. https://doi.org/10.1016/S0167-6105(97)00207-9.
Witthoft, S., K. Kesner, and R. W. Poston. 2008. “Performance and repair design of stay cables with rain/wind-induced vibrations.” J. Perform. Constr. Facil. 22 (6): 364–372. https://doi.org/10.1061/(ASCE)0887-3828(2008)22:6(364).
Zhou, P., M. Liu, and H. Li. 2020. “A passive negative stiffness damper in series with a flexible support: Theoretical and experimental study.” Struct. Control Health Monit. 27 (9): e2594. https://doi.org/10.1002/stc.2594.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 8, 2020
Accepted: Feb 24, 2021
Published online: May 13, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 13, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.