Fracture and Size Effect Suppression by Mesh Reinforcement of Concrete and Justification of Empirical Shrinkage and Temperature Reinforcement in Design Codes
Publication: Journal of Engineering Mechanics
Volume 146, Issue 10
Abstract
A minimum mesh reinforcement, called the shrinkage and temperature reinforcement, has been required by ACI design code for to attain ductility with no formation of large localized cracks. The required steel ratio, which is 0.18%, has been empirical. In this paper, it is shown that it can be explained theoretically and justified approximately by finite-element analysis of the size effect and crack growth based on quasibrittle fracture mechanics, in which the microplane model M7 and crack band model are used. The premise, which simplifies the analysis, is that the cracking would localize into wider cracks if and only if there is a size effect. The size effect can be completely avoided only if, for the same cross-section area, the tensile strength of yielding reinforcement is greater that the tensile strength of concrete. The effect of increasing the reinforcement ratio is also explored. The calculations indicate that fracture mechanics can, and should, be used to check ductility and size effect implications in the two-sided reinforced members, boundary beams, and more complicated designs such as in shear walls.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available in a repository online in accordance with funder data retention policies. Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
The coding of M7, directly usable as a material subroutine in, e.g., VUMAT of ABAQUS, can be freely downloaded from Bažant’s website: www.civil.northwestern.edu/people/bazant.
Acknowledgments
Partial funding under NSF Grant No. CMMI-2029641 to Northwestern University is gratefully appreciated.
References
ACI Committee. 2019. Building code requirements for structural concrete (ACI 318-19) and commentary. Farmington Hills, MI: ACI.
Baluch, M. H., A. K. Azad, and W. Ashmawi. 1992. “Fracture mechanics application to reinforced concrete members in flexure.” In Applications of fracture mechanics to reinforced concrete, 413–436. London: Elsevier.
Batdorf, S. B., and B. Budiansky. 1949. A mathematical theory of plasticity based on the concept of slip. Washington, DC: The National Aeronautics and Space Administration.
Bažant, Z. P. 1984. “Size effect in blunt fracture: Concrete, rock, metal.” J. Eng. Mech. 110 (4): 518–535. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:4(518).
Bažant, Z. P., and L. Cedolin. 2010. Stability of structures: Elastic, inelastic, fracture and damage theories. Singapore: World Scientific.
Bažant, Z. P., and R. Desmorat. 1994. “Size effect in fiber or bar pullout with interface softening slip.” J. Eng. Mech. 120 (9): 1945–1962. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:9(1945).
Bažant, Z. P., and M. Kazemi. 1990. “Determination of fracture energy, process zone longth and brittleness number from size effect, with application to rock and conerete.” Int. J. Fract. 44 (2): 131. https://doi.org/10.1007/BF00047063.
Bažant, Z. P., and J. L. Le. 2017. Probabilistic mechanics of quasibrittle structures: Strength, lifetime, and size effect. Cambridge, UK: Cambridge University Press.
Bažant, Z. P., and B. H. Oh. 1983. “Crack band theory for fracture of concrete.” Matériaux et Constr. 16 (3): 155–177. https://doi.org/10.1007/BF02486267.
Bažant, Z. P., and B. H. Oh. 1985. “Microplane model for progressive fracture of concrete and rock.” J. Eng. Mech. 111 (4): 559–582. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:4(559).
Bažant, Z. P., and J. Ozbolt. 1992. “Compression failure of quasibrittle material: Nonlocal microplane model.” J. Eng. Mech. 118 (3): 540–556. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:3(540).
Bažant, Z. P., and J. Planas. 1997. Fracture and size effect in concrete and other quasibrittle materials. London: CRC Press.
Bažant, Z. P., and P. C. Prat. 1988. “Microplane model for brittle-plastic material. I: Theory.” J. Eng. Mech. 114 (10): 1672–1688. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:10(1672).
Bažant, Z. P., M. Rasoolinejad, A. Dönmez, and W. Luo. 2019. “Dependence of fracture size effect and projectile penetration on fiber content of FRC.” In Proc., IOP Conf. Series: Materials Science and Engineering, 012001. Bristol, UK: IOP Publishing.
Bažant, Z. P., S. Sener, and J.-K. Kim. 1987. “Effect of cracking on drying permeability and diffusivity of concrete.” ACI Mater. J. 84 (5): 351–357.
Caner, F. C., and Z. P. Bažant. 2012a. “Microplane model M7 for plain concrete. I: Formulation.” J. Eng. Mech. 139 (12): 1714–1723. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000570.
Caner, F. C., and Z. P. Bažant. 2012b. “Microplane model M7 for plain concrete. II: Calibration and verification.” J. Eng. Mech. 139 (12): 1724–1735. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000571.
Di Luzio, G., and G. Cusatis. 2018. “Cohesive crack analysis of size effect for samples with blunt notches and generalized size effect curve for quasi-brittle materials.” Eng. Fract. Mech. 204 (Dec): 15–28. https://doi.org/10.1016/j.engfracmech.2018.09.003.
England, G., and A. Ross. 1962. “Reinforced concrete under thermal gradients.” Mag. Concr. Res. 14 (40): 5–12. https://doi.org/10.1680/macr.1962.14.40.5.
Fayyad, T. M., and J. M. Lees. 2015. “Evaluation of a minimum flexural reinforcement ratio using fracture-based modelling.” In Proc., IABSE Symp. Report, 1–8. Zürich, Switzerland: International Association for Bridge and Structural Engineering.
Ghorbani-Renani, I., N. Velev, R. Tremblay, D. Palermo, B. Massicotte, and P. Léger. 2009. “Modeling and testing influence of scaling effects on inelastic response of shear walls.” ACI Struct. J. 106 (3): 358.
Gilbert, R. I. 1992. “Shrinkage cracking in fully restrained concrete members.” Struct. J. 89 (2): 141–149.
Henry, R. 2013. “Assessment of minimum vertical reinforcement limits for RC walls.” Bull. N. Z. Soc. Earthquake Eng. 46 (2): 88–96. https://doi.org/10.5459/bnzsee.46.2.88-96.
Kianoush, M., M. Acarcan, and A. Ziari. 2008. “Behavior of base restrained reinforced concrete walls under volumetric change.” Eng. Struct. 30 (6): 1526–1534. https://doi.org/10.1016/j.engstruct.2007.10.009.
Maier, J., and B. Thürlimann. 1985. “Bruchversuche an stahlbetonscheiben.” Bericht/Institut für Baustatik und Konstruktion ETH Zürich 8003 (1): 29. https://doi.org/10.1007/978-3-0348-5190-9.
McCullough, B. F., A. Adou-Ayyash, W. R. Hudson, and J. P. Randall. 1976. Design of continuously reinforced concrete pavements for highways. Washington, DC: Transportation Research Board.
Mertol, H. C., S. Rizkalla, P. Zia, and A. Mirmiran. 2010. “Creep and shrinkage behavior of high-strength concrete and minimum reinforcement ratio for bridge columns.” PCI J. 55 (3): 1–3. https://doi.org/10.15554/pcij.06012010.138.154.
Ozbolt, J., and M. Bruckner. 1999. “Minimum reinforcement requirement for RC beams.” Eur. Struct. Integr. Soc. 24: 181–201. https://doi.org/10.1016/S1566-1369(99)80069-7.
Rao, G. A., I. Vijayanand, and R. Eligehausen. 2008. “Studies on ductility and evaluation of minimum flexural reinforcement in RC beams.” Mater. Struct. 41 (4): 759–771. https://doi.org/10.1617/s11527-007-9280-7.
Rasoolinejad, M., and Z. P. Bažant. 2019. “Size effect of squat shear walls extrapolated by microplane model M7.” ACI Struct. J. 116 (3): 304–307. https://doi.org/10.14359/51714478.
Rasoolinejad, M., S. Rahimi-Aghdam, and Z. P. Bažant. 2019. “Prediction of autogenous shrinkage in concrete from material composition or strength calibrated by a large database, as update to model B4.” Mater. Struct. 52 (2): 33. https://doi.org/10.1617/s11527-019-1331-3.
Shah, S. P., and C. Ouyang. 1991. “Mechanical behavior of fiber-reinforced cement-based composites.” J. Am. Ceram. Soc. 74 (11): 2727–2953. https://doi.org/10.1111/j.1151-2916.1991.tb06836.x.
Shehata, I. A., L. C. Shehata, and S. L. Garcia. 2003. “Minimum steel ratios in reinforced concrete beams made of concrete with different strength—Theoretical approach.” Mater. Struct. 36 (1): 3. https://doi.org/10.1007/BF02481565.
Sule, M., and K. Van Breugel. 2004. “The effect of reinforcement on early-age cracking due to autogenous shrinkage and thermal effects.” Cem. Concr. Compos. 26 (5): 581–587. https://doi.org/10.1016/S0958-9465(03)00078-7.
Suprenant, B. A. 2002. “Shrinkage and temperature reinforcement.” ACI Concr. Int. 24 (9): 72–76.
Taylor, G. I. 1938. “Plastic strain in metals.” J. Inst. Met. 62: 307–324.
Wei, Y., S. Liang, W. Guo, and W. Hansen. 2017. “Stress prediction in very early-age concrete subject to restraint under varying temperature histories.” Cem. Concr. Compos. 83 (Oct): 45–56. https://doi.org/10.1016/j.cemconcomp.2017.07.006.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 8, 2020
Accepted: May 26, 2020
Published online: Aug 11, 2020
Published in print: Oct 1, 2020
Discussion open until: Jan 11, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.