Performance of a Nonlinear Electromagnetic Energy Harvester–Structure System under Random Excitation
Publication: Journal of Engineering Mechanics
Volume 146, Issue 9
Abstract
Electromagnetic (EM) energy harvesters have been proposed in civil engineering for simultaneous energy scavenging and structural vibration mitigation. One important component governing the performance of EM energy harvester is the energy harvesting circuit. These circuits consist of electronic components that could introduce nonlinearity to the electromechanically coupled harvester–structure system. The presence of this circuit nonlinearity complicates the performance analysis of the harvester–structure system as well as the design of the energy harvesting circuit. In this study, the performance of a structure equipped with an EM energy harvester connected to a representative energy harvesting circuit under Gaussian white noise force excitation is presented. The examined circuit, termed the standard energy harvesting circuit, consists of a full-wave bridge rectifier and a capacitor connected in parallel with a resistor. A statistical linearization technique is adopted to estimate the system’s stationary response. The accuracy of the technique is validated both numerically and experimentally. The results show that neglecting the circuit nonlinearity due to diodes in the full-wave bridge rectifier can result in overestimating both the damping capability of the harvester and the scavenged output power. When the blockage effect of diodes is prevented effectively, the performance of vibration mitigation and energy harvesting can be enhanced simultaneously. The results of this study indicate that neglecting circuit nonlinearity in the analysis could lead to nonoptimal circuit design and could affect the efficiency of energy harvesting.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all of the data, models, or code that support the findings of this study are available from the corresponding author on reasonable request, including the code for the Monte Carlo simulation indicated in Figs. 3 and 4, as well as the experimental data in Fig. 6.
Acknowledgments
The first author would like to express thanks for the financial support from the Hong Kong Ph.D. Fellowship Scheme (HKPFS) provided by the Research Grants Council of the Hong Kong Special Administration Region (HKSAR).
References
Brent, R. P. 1973. Algorithms for minimization without derivatives. Englewood Cliffs, NJ: Prentice-Hall.
Cassidy, I. L., and J. T. Scruggs. 2012. “Statistically linearized optimal control of an electromagnetic vibratory energy harvester.” Smart Mater. Struct. 21 (8): 085003. https://doi.org/10.1088/0964-1726/21/8/085003.
Clough, R. W., and J. Penzien 1993. Dynamics of structures. 2nd ed. New York: McGraw-Hill.
Dai, H. L., A. Abdelkefi, U. Javed, and L. Wang. 2015. “Modeling and performance of electromagnetic energy harvesting from galloping oscillations.” Smart Mater. Struct. 24 (4): 045012. https://doi.org/10.1088/0964-1726/24/4/045012.
Elliott, S. J., and M. Zilletti. 2014. “Scaling of electromagnetic transducers for shunt damping and energy harvesting.” J. Sound Vib. 333 (8): 2185–2195. https://doi.org/10.1016/j.jsv.2013.11.036.
Goel, R. K., and A. K. Chopra. 1998. “Period formulas for concrete shear wall buildings.” J. Struct. Eng. 124 (4): 426–433. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(426).
Gonzalez-Buelga, A., L. R. Clare, A. Cammarano, S. A. Neild, S. G. Burrow, and D. J. Inman. 2014. “An optimised tuned mass damper/harvester device.” Struct. Control Health Monit. 21 (8): 1154–1169. https://doi.org/10.1002/stc.1639.
Guyomar, D., and M. Lallart. 2011. “Recent progress in piezoelectric conversion and energy harvesting using nonlinear electronic interfaces and issues in small scale implementation.” Micromachines 2 (2): 274–294. https://doi.org/10.3390/mi2020274.
Guyomar, D., C. Richard, A. Badel, E. Lefeuvre, and M. Lallart. 2009. Energy harvesting using non-linear techniques. Boston: Springer.
Harne, R. L. 2013. “Modelling and analysis of distributed electromagnetic oscillators for broadband vibration attenuation and concurrent energy harvesting.” Appl. Math. Modell. 37 (6): 4360–4370. https://doi.org/10.1016/j.apm.2012.09.047.
Hasheminejad, S. M., A. H. Rabiee, and A. H. D. Markazi. 2018. “Dual-functional electromagnetic energy harvesting and vortex-induced vibration control of an elastically mounted circular cylinder.” J. Eng. Mech. 144 (3): 04017184. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001411.
Ioinovici, A. 2013. “Power electronics and energy conversion systems.” In Fundamentals and hard-switching converters. Hoboken, NJ: Wiley.
Jamshidi, M., C. C. Chang, and A. Bakhshi. 2018. “Design and control of a self-powered hybrid electromagnetic damper.” J. Sound Vib. 428 (Aug): 147–167. https://doi.org/10.1016/j.jsv.2018.05.004.
Kollmorgen. 1997. Kollmorgen linear motors aim to cut cost of semiconductors and electronics manufacture. Radford, VA: Kollmorgen.
Lefeuvre, E., D. Audigier, C. Richard, and D. Guyomar. 2007. “Buck-boost converter for sensorless power optimization of piezoelectric energy harvester.” IEEE Trans. Power Electron. 22 (5): 2018–2025. https://doi.org/10.1109/TPEL.2007.904230.
Lin, T., J. J. Wang, and L. Zuo. 2018. “Efficient electromagnetic energy harvester for railroad transportation.” Mechatronics 53 (Aug): 277–286. https://doi.org/10.1016/j.mechatronics.2018.06.019.
Loong, C. N., C. C. Chang, and E. G. Dimitrakopoulos. 2018. “Circuit nonlinearity effect on the performance of an electromagnetic energy harvester-structure system.” Eng. Struct. 173 (Oct): 449–459. https://doi.org/10.1016/j.engstruct.2018.06.090.
Moticont. 2017. “Linear voice coil motors with internal bearing.” Accessed November 21, 2017. http://www.moticont.com/.
Pan, Y., T. Lin, F. Qian, C. Liu, C. Yu, J. Yu, J. Zuo, and L. Zuo. 2019. “Modeling and field-test of a compact electromagnetic energy harvester for railroad transportation.” Appl. Energy 247 (Aug): 309–321. https://doi.org/10.1016/j.apenergy.2019.03.051.
Roberts, J. B., and P. D. Spanos. 1990. Random vibration and statistical linearization. Hoboken, NJ: Wiley.
Scruggs, J. T., and W. D. Iwan. 2003. “Control of a civil structure using an electric machine with semiactive capability.” J. Struct. Eng. 129 (7): 951–959. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(951).
Shen, W., and S. Zhu. 2015. “Harvesting energy via electromagnetic damper: Application to bridge stay cables.” J. Intell. Mater. Syst. Struct. 26 (1): 3–19. https://doi.org/10.1177/1045389X13519003.
Shen, W., S. Zhu, and Y. Xu. 2012. “An experimental study on self-powered vibration control and monitoring system using electromagnetic TMD and wireless sensors.” Sens. Actuators, A 180 (Jun): 166–176. https://doi.org/10.1016/j.sna.2012.04.011.
Shen, W., S. Zhu, and H. Zhu. 2016. “Experimental study on using electromagnetic devices on bridge stay cables for simultaneous energy harvesting and vibration damping.” Smart Mater. Struct. 25 (6): 065011. https://doi.org/10.1088/0964-1726/25/6/065011.
Shen, W., S. Zhu, and H. Zhu. 2019. “Unify energy harvesting and vibration control functions in randomly excited structures with electromagnetic devices.” J. Eng. Mech. 145 (1): 04018115. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001548.
Soong, T. T., and M. Grigoriu. 1993. Random vibration of mechanical and structural systems. Englewood Cliffs, NJ: Prentice Hall.
Stephen, N. G. 2006. “On energy harvesting from ambient vibration.” J. Sound Vib. 293 (1–2): 409–425. https://doi.org/10.1016/j.jsv.2005.10.003.
Takeya, K., E. Sasaki, and Y. Kobayashi. 2016. “Design and parametric study on energy harvesting from bridge using tuned dual-mass damper systems.” J. Sound Vib. 361 (Jan): 50–65. https://doi.org/10.1016/j.jsv.2015.10.002.
Tang, X., and L. Zuo. 2012. “Vibration energy harvesting from random force and motion excitations.” Smart Mater. Struct. 21 (7): 075025. https://doi.org/10.1088/0964-1726/21/7/075025.
Zhang, H., L. R. Corr, and T. Ma. 2018. “Effects of electrical loads containing non-resistive components on electromagnetic vibration energy harvester performance.” Mech. Syst. Sig. Process. 101 (Feb): 55–66. https://doi.org/10.1016/j.ymssp.2017.08.031.
Zhu, S., W. Shen, and Y. Xu. 2012. “Linear electromagnetic devices for vibration damping and energy harvesting: Modeling and testing.” Eng. Struct. 34 (Jan): 198–212. https://doi.org/10.1016/j.engstruct.2011.09.024.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Dec 16, 2019
Accepted: Apr 16, 2020
Published online: Jun 29, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.