Abstract
Laminated glass, made by bonding glass plies together through polymeric interlayers, is a redundant system that allows for stress redistribution after partial failure. This study analyzes how the structural safety level of laminates made by two or three plies of annealed glass varies with the ratio between the thicknesses of the layers and their placement in the package. The probability of failure of laminated glass elements, in which the layers are arranged in different order, is statistically analyzed under gust wind loads, accounting for all the potential sequences of breakage for the plies. The gain obtainable from a tailored composition is quantitatively estimated through specific safety factors to be used in semiprobabilistic (Level I) design and calibrated through comparison in paradigmatic case studies with full-probabilistic (Level III) methods. Optimal laminated packages are thus determined as a function of the target probability of failure classified according to four distinct classes of consequences for malfunction or failure.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Gianni Royer Carfagni acknowledges the partial support of the Italian Dipartimento della Protezione Civile under Project ReLUIS-DPC 2019–2021.
References
Badalassi, M., L. Biolzi, G. Royer Carfagni, and W. Salvatore. 2014. “Safety factors for the structural design of glass.” Constr. Build. Mater. 55 (Mar): 114–127. https://doi.org/10.1016/j.conbuildmat.2014.01.005.
Ballarini, R., G. Pisano, and G. Royer Carfagni. 2016. “The lower bound for glass strength and its interpretation with generalized Weibull statistics for structural applications.” J. Eng. Mech. 142 (12): 04016100. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001151.
Bennett, R. M., and A. H. S. Ang. 1983. Investigation of methods for structural systems reliability. Urbana, IL: Univ. of Illinois.
Bonati, A., G. Pisano, and G. Royer Carfagni. 2019a. “Partial safety factors for laminated glass.” J. Am. Ceram. Soc. 103 (4): 2741–2756. https://doi.org/10.1111/jace.16907.
Bonati, A., G. Pisano, and G. Royer Carfagni. 2019b. “Redundancy and robustness of brittle laminated plates. Overlooked aspects in structural glass.” Compos. Struct. 227 (Nov): 111288. https://doi.org/10.1016/j.compstruct.2019.111288.
CEN (European Committee for Standardization). 2001. Glass in building: Determination of bending strength of glass. 2: Coaxial double ring test on flat specimens with large test surface areas. EN 1288-2/CEN TC129. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005a. Actions on structures. 1–4: General actions: Wind actions. Eurocode I–EN 1991-1-4/CEN TC250. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005b. Basis of structural design. Eurocode 0–EN 1990/CEN TC250. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2006. An overview of prEN-13474 and the work of CEN/TC129/WG8 from which it was developed. Internal Document CEN/TC129/WG8. Brussels, Belgium: CEN.
Collini, L., and G. Royer Carfagni. 2004. “Flexural strength of glass-ceramic for structural applications.” J. Eur. Ceram. Soc. 34 (11): 2675–2685. https://doi.org/10.1016/j.jeurceramsoc.2013.10.032.
D’Ambrosio, G., L. Galuppi, and G. Royer-Carfagni. 2019. “A simple model for the post-breakage response of laminated glass under in-plane loading.” Comp. Struct. 230 (Dec): 111426. https://doi.org/10.1016/j.compstruct.2019.111426.
DIN (Deutsches Institut für Normung). 2010. Glass in building: Design and construction rules. 1: Terms and general bases. [In German.] DIN 18008-1. Berlin: DIN.
Evans, A. G. 1978. “A general approach for the statistical analysis of multiaxial fracture.” J. Am. Ceram. Soc. 61 (7–8): 302–308. https://doi.org/10.1111/j.1151-2916.1978.tb09314.x.
Feldmann, M., and P. Di Biase. 2018. “The CEN-TS’ structural glass: Design and construction rules’ as pre-standard for the Eurocode.” In Proc., Engineered Transparency 2018: Glass in Architecture and Structural Engineering, 71–80. Ernst & Sons: Berlin.
Galuppi, L., and G. Royer Carfagni. 2012. “Laminated beams with viscoelastic interlayer.” Int. J. Solids Struct. 49 (18): 2637–2645. https://doi.org/10.1016/j.ijsolstr.2012.05.028.
Galuppi, L., and G. Royer-Carfagni. 2016. “A homogenized model for the post-breakage tensile behavior of laminated glass.” Comp. Struc. 154 (Oct): 600–615. https://doi.org/10.1016/j.compstruct.2016.07.052.
Galuppi, L., and G. Royer-Carfagni. 2017. “A homogenized model à la Hashin for cracked laminates under equibiaxial stress. Applications to laminated glass.” Composites Part B 111 (Feb): 332–347. https://doi.org/10.1016/j.compositesb.2016.11.027.
Henley, E. J., and H. Kumamoto. 1981. Reliability engineering and risk assessment. Englewood Cliffs, NJ: Prentice Hall.
Melchers, R. E., and A. T. Beck. 2018. Structural reliability analysis and prediction. 3rd ed. Hoboken, NJ: Wiley.
Pisano, G., and G. Royer Carfagni. 2015. “The statistical interpretation of the strength of float glass for structural applications.” Constr. Build. Mater. 98 (Nov): 741–756. https://doi.org/10.1016/j.conbuildmat.2015.08.073.
Pisano, G., and G. Royer Carfagni. 2017. “A micromechanical derivation of the macroscopic strength statistics for pristine or corroded/abraded float glass.” J. Eur. Ceram. Soc. 37 (13): 4197–4206. https://doi.org/10.1016/j.jeurceramsoc.2017.04.046.
Royer Carfagni, G. 2012. “The recommendations CNR-DT210. Towards an Italian structural code for glass in buildings.” Struct. Magaz. 17 (Jun/Aug): 22–25.
Stewert, M. G., and R. E. Melchers. 1997. Probabilistic risk assessment of engineering systems. London: Chapman & Hall.
Wiederhorn, S. M. 1974. Strength of glass: A fracture mechanics approach. Arlington, VA: National Bureau of Standards, Office of Naval Research Program.
Wiederhorn, S. M., and L. H. Bolz. 1970. “Stress corrosion and static fatigue of glass.” J. Am. Ceram. Soc. 53 (10): 543–548. https://doi.org/10.1111/j.1151-2916.1970.tb15962.x.
Wiederhorn, S. M., S. W. Freiman, E. R. Fuller Jr., and C. J. Simmons. 1982. “Effects of water and other dielectrics on crack growth.” J. Mater. Sci. 17 (12): 3460–3478. https://doi.org/10.1007/BF00752191.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 28, 2019
Accepted: Feb 18, 2020
Published online: Apr 29, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.