Energy-Based Coarse Graining of the Lattice-Discrete Particle Model
Publication: Journal of Engineering Mechanics
Volume 146, Issue 5
Abstract
Concrete is a complex heterogeneous material. Its internal structure controls its mechanical behavior through crack localization, branching, and coalescence. As a result, only models that represent its failure through fracture-mechanics-based formulations can physically account for such phenomena. Among these models, the lattice-discrete particle model (LDPM) has great success. By representing concrete through an assemblage of interacting coarse aggregate pieces, LDPM can successfully model concrete multiaxial behavior under various static and dynamic loading conditions. However, this fine detailing results in a large computational cost that hampers the use of LDPM in large structural scale applications. In this work, the formulation of a calibration-free coarse-graining technique is presented. In this technique, fictitiously larger aggregate pieces are used to replace the original concrete aggregate pieces, with linear scaling of aggregate diameters. The formulation accounts for the effect of coarse graining on the amount of energy dissipated during deformation under combined tension and shear (tension-shear). Because of coarse graining, less distributed cracking is represented during tension-shear deformation at the coarse scale. The proposed formulation recovers this energy-dissipating mechanism by introducing a transition function in the tension-shear constitutive law based on the coarse-graining factor and geometry, which eliminates the need to recalibrate the LDPM parameters for the coarser scale. The formulation is developed and initially validated using simulations of uniaxial compression and notched three-point bending tests, with coarse-graining factors up to 5. Then, using the same identified function without any change, extensive validation of the technique is demonstrated by simulating size effect tests of notched three-point bending tests, uniaxial compression of ultrahigh-performance concrete (UHPC) with various scaling factors, and flexural behavior of RC beams with different reinforcement ratios. The results show that the proposed technique is capable of replicating the same fine-scale response and failure patterns at a fraction of the fine-scale computational cost.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The UHPC experimental data presented in this study as well as the input data files used for simulations can be made available upon reasonable request from the corresponding author. These data are not yet publicly available, but experimental data will be presented in future publications.
Acknowledgments
The authors would like to acknowledge the support from the Rensselaer Polytechnic Institute Center for Computational Innovations (CCI) to run the simulations in this paper using the high-performance computing cluster. The authors also would like to acknowledge graduate students Shady Gomma and Tathagata Bhaduri for the UHPC data provided.
References
Abdellatef, M., M. Alnaggar, G. Boumakis, G. Cusatis, G. Di-Luzio, and R. Wendner. 2015. “Lattice discrete particle modeling for coupled concrete creep and shrinkage using the solidification microprestress theory.” In Proc., 10th Int. Conf. on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, edited by C. Hellmich, B. Pichler, and J. Kollegger, 184–193. Reston, VA: ASCE.
Abdellatef, M., E. Saleem, D. Lau, L. Stenroo, and M. Alnaggar. 2016. “Bond degradation of corroded reinforcement: An experimental and numerical study.” In Proc., 9th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures. Bayonne, France: FramCosX.
Abdellatef, M., J. Vorel, R. Wendner, and M. Alnaggar. 2019. “Lattice discrete particle modeling of time dependent behavior of prestressed concrete beams.” J. Struct. Eng. 145 (7): 04019060.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete and commentary. ACI 318. Farmington Hills, MI: ACI.
Alnaggar, M. 2014. “Multiscale modeling of aging and deterioration of reinforced concrete structures.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Northwestern Univ.
Alnaggar, M., and N. Bhanot. 2018. “A machine learning approach for the identification of the lattice discrete particle model parameters.” Eng. Fract. Mech. 197 (Jun): 160–175. https://doi.org/10.1016/j.engfracmech.2018.04.041.
Alnaggar, M., and G. Cusatis. 2012. “Automatic parameter identification of discrete mesoscale models with application to the coarse-grained simulation of reinforced concrete structures.” In Proc., 20th Analysis and Computation Specialty Conf., edited by J. Carrato and J. G. Burns, 406–417. Reston, VA: ASCE.
Alnaggar, M., G. Cusatis, and G. Di-Luzio. 2013. “Lattice discrete particle modeling (LDPM) of alkali silica reaction (ASR) deterioration of concrete structures.” Cem. Concr. Compos. 41 (Aug): 45–59. https://doi.org/10.1016/j.cemconcomp.2013.04.015.
Alnaggar, M., G. Cusatis, J. Qu, and M. Liu. 2014. “Simulating acoustic nonlinearity change in accelerated mortar bar tests: A discrete meso-scale approach.” In Life-cycle of structural systems: Design, assessment, maintenance and management, 451–458. Boca Raton, FL: CRC Press.
Alnaggar, M., G. Di Luzio, and G. Cusatis. 2017. “Modeling time-dependent behavior of concrete affected by alkali silica reaction in variable environmental conditions.” Materials 10 (5): 471. https://doi.org/10.3390/ma10050471.
Alnaggar, M., D. Pelessone, and G. Cusatis. 2018. “Lattice discrete particle modeling of reinforced concrete flexural behavior.” J. Struct. Eng. 145 (1): 04018231. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002230.
Armstrong, J., C. Chakravarty, and P. Ballone. 2012. “Statistical mechanics of coarse graining: Estimating dynamical speedups from excess entropies.” J. Chem. Phys. 136 (12): 124503. https://doi.org/10.1063/1.3697383.
Babuška, I. 1976. “Homogenization and its application. mathematical and computational problems.” In Vol. III of Numerical solution of partial differential equations, 89–116. New York: Elsevier.
Barber, C. B., D. P. Dobkin, and H. Huhdanpaa. 1996. “The quickhull algorithm for convex hulls.” ACM Trans. Math. Software 22 (4): 469–483. https://doi.org/10.1145/235815.235821.
Bažant, Z. P. 1984. “Size effect in blunt fracture: Concrete, rock, metal.” J. Eng. Mech. 110 (4): 518–535. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:4(518).
Bažant, Z. P., and E. Becq-Giraudon. 2002. “Statistical prediction of fracture parameters of concrete and implications for choice of testing standard.” Cem. Concr. Res. 32 (4): 529–556. https://doi.org/10.1016/S0008-8846(01)00723-2.
Bažant, Z. P., G. Cusatis, and L. Cedolin. 2004. “Temperature effect on concrete creep modeled by microprestress-solidification theory.” J. Eng. Mech. 130 (6): 691–699. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(691).
Bažant, Z. P., and B. H. Oh. 1983. “Crack band theory for fracture of concrete.” Matériaux Constr. 16 (3): 155–177. https://doi.org/10.1007/BF02486267.
Bažant, Z. P., and P. A. Pfeiffer. 1987. “Determination of fracture energy from size effect and brittleness number.” ACI Mater. J. 84 (6): 463–480.
Bažant, Z. P., and J. Planas. 1997. Fracture and size effect in concrete and other quasibrittle materials. Boca Raton, FL: CRC Press.
Bažant, Z. P., M. R. Tabbara, M. T. Kazemi, and G. Pijaudier-Cabot. 1990. “Random particle model for fracture of aggregate or fiber composites.” J. Eng. Mech. 116 (8): 1686–1705. https://doi.org/10.1061/(ASCE)0733-9399(1990)116:8(1686).
Belgin, C. M., and S. Sener. 2008. “Size effect on failure of overreinforced concrete beams.” Eng. Fract. Mech. 75 (8): 2308–2319. https://doi.org/10.1016/j.engfracmech.2007.09.006.
Benedetti, I., and M. Aliabadi. 2015. “Multiscale modeling of polycrystalline materials: A boundary element approach to material degradation and fracture.” Comput. Methods Appl. Mech. Eng. 289 (Jun): 429–453. https://doi.org/10.1016/j.cma.2015.02.018.
Bin, S., and Z. Li. 2016. “Multi-scale modeling and trans-level simulation from material meso-damage to structural failure of reinforced concrete frame structures under seismic loading.” J. Comput. Sci. 12 (Jan): 38–50. https://doi.org/10.1016/j.jocs.2015.11.003.
Bolander, J., Jr., and S. Saito. 1998. “Fracture analyses using spring networks with random geometry.” Eng. Fract. Mech. 61 (5–6): 569–591. https://doi.org/10.1016/S0013-7944(98)00069-1.
Caballero, A., I. Carol, and C. López. 2006. “A meso-level approach to the 3d numerical analysis of cracking and fracture of concrete materials.” Fatigue Fract. Eng. Mater. Struct. 29 (12): 979–991. https://doi.org/10.1111/j.1460-2695.2006.01052.x.
Ceccato, C., M. Salviato, C. Pellegrino, and G. Cusatis. 2017. “Simulation of concrete failure and fiber reinforced polymer fracture in confined columns with different cross sectional shape.” Int. J. Solids Struct. 108 (Mar): 216–229. https://doi.org/10.1016/j.ijsolstr.2016.12.017.
Cranford, S., and M. J. Buehler. 2010. Coarse-graining parameterization and multiscale simulation of hierarchical systems. I: Theory and model formulation. Cambridge, MA: Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology.
Cusatis, G., Z. P. Bažant, and L. Cedolin. 2003. “Confinement-shear lattice model for concrete damage in tension and compression. I: theory.” J. Eng. Mech. 129 (12): 1439–1448. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:12(1439).
Cusatis, G., Z. P. Bažant, and L. Cedolin. 2006. “Confinement-shear lattice CSL model for fracture propagation in concrete.” Comput. Methods Appl. Mech. Eng. 195 (52): 7154–7171. https://doi.org/10.1016/j.cma.2005.04.019.
Cusatis, G., and L. Cedolin. 2007. “Two-scale study of concrete fracturing behavior.” Eng. Fract. Mech. 74 (1): 3–17. https://doi.org/10.1016/j.engfracmech.2006.01.021.
Cusatis, G., A. Mencarelli, D. Pelessone, and J. Baylot. 2011a. “Lattice discrete particle model (LDPM) for failure behavior of concrete. II: Calibration and validation.” Cem. Concr. Compos. 33 (9): 891–905. https://doi.org/10.1016/j.cemconcomp.2011.02.010.
Cusatis, G., and H. Nakamura. 2011. “Discrete modeling of concrete materials and structures.” Cem. Concr. Compos. 33 (9): 865–866. https://doi.org/10.1016/j.cemconcomp.2011.08.011.
Cusatis, G., D. Pelessone, and A. Mencarelli. 2011b. “Lattice discrete particle model (LDPM) for concrete failure behavior of concrete. I: Theory.” Cem. Concr. Compos. 33 (9): 881–890. https://doi.org/10.1016/j.cemconcomp.2011.02.011.
Cusatis, G., R. Rezakhani, M. Alnaggar, X. Zhou, and D. Pelessone. 2014. “Multiscale computational models for the simulation of concrete materials and structures.” In Computational modelling of concrete structures, 23–38. Boca Raton, FL: CRC Press.
Delaunay, B. 1934. “Sur la sphere vide.” Izv. Akad. Nauk SSSR, Otdelenie Matematicheskii i Estestvennyka Nauk 7 (793–800): 1–2.
Dragon, A., and Z. Mroz. 1979. “A continuum model for plastic-brittle behaviour of rock and concrete.” Int. J. Eng. Sci. 17 (2): 121–137. https://doi.org/10.1016/0020-7225(79)90058-2.
Español, P. 2004. “Statistical mechanics of coarse-graining.” In Novel methods in soft matter simulations, 69–115. Berlin: Springer.
Fish, J., W. Chen, and R. Li. 2007. “Generalized mathematical homogenization of atomistic media at finite temperatures in three dimensions.” Comput. Methods Appl. Mech. Eng. 196 (4–6): 908–922. https://doi.org/10.1016/j.cma.2006.08.001.
Fish, J., W. Chen, and Y. Tang. 2005. “Generalized mathematical homogenization of atomistic media at finite temperatures.” Int. J. Multiscale Comput. Eng. 3 (4): 393–413.
Fish, J., and A. Wagiman. 1993. “Multiscale finite element method for a locally nonperiodic heterogeneous medium.” Comput. Mech. 12 (3): 164–180. https://doi.org/10.1007/BF00371991.
Hassani, B., and E. Hinton. 1998. “A review of homogenization and topology optimization. I: Homogenization theory for media with periodic structure.” Comput. Struct. 69 (6): 707–717. https://doi.org/10.1016/S0045-7949(98)00131-X.
Holland, P. W., and R. E. Welsch. 1977. “Robust regression using iteratively reweighted least-squares.” Commun. Stat.-Theory Methods 6 (9): 813–827. https://doi.org/10.1080/03610927708827533.
Huang, T., Y. Zhang, and C. Yang. 2016. “Multiscale modelling of multiple-cracking tensile fracture behaviour of engineered cementitious composites.” Eng. Fract. Mech. 160 (Jul): 52–66. https://doi.org/10.1016/j.engfracmech.2016.04.006.
Izvekov, S., and G. A. Voth. 2005. “A multiscale coarse-graining method for biomolecular systems.” J. Phys. Chem. B 109 (7): 2469–2473. https://doi.org/10.1021/jp044629q.
Knotts, T. A., IV, N. Rathore, D. C. Schwartz, and J. J. de Pablo. 2007. “A coarse grain model for DNA.” J. Chem. Phys. 126 (8): 084901. https://doi.org/10.1063/1.2431804.
Lale, E., R. Rezakhani, M. Alnaggar, and G. Cusatis. 2018. “Homogenization coarse graining (HCG) of the lattice discrete particle model (LDPM) for the analysis of reinforced concrete structures.” Eng. Fract. Mech. 197 (Jun): 259–277. https://doi.org/10.1016/j.engfracmech.2018.04.043.
Leite, J., V. Slowik, and H. Mihashi. 2004. “Computer simulation of fracture processes of concrete using mesolevel models of lattice structures.” Cem. Concr. Res. 34 (6): 1025–1033. https://doi.org/10.1016/j.cemconres.2003.11.011.
Li, X., and K. Wan. 2011. “A bridging scale method for granular materials with discrete particle assembly–Cosserat continuum modeling.” Comput. Geotech. 38 (8): 1052–1068. https://doi.org/10.1016/j.compgeo.2011.07.001.
Lilliu, G., and J. G. van Mier. 2003. “3D lattice type fracture model for concrete.” Eng. Fract. Mech. 70 (7–8): 927–941. https://doi.org/10.1016/S0013-7944(02)00158-3.
Mazars, J., and G. Pijaudier-Cabot. 1989. “Continuum damage theory—Application to concrete.” J. Eng. Mech. 115 (2): 345–365. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:2(345).
Müller-Plathe, F. 2002. “Coarse-graining in polymer simulation: From the atomistic to the mesoscopic scale and back.” ChemPhysChem 3 (9): 754–769. https://doi.org/10.1002/1439-7641(20020916)3:9%3C754::AID-CPHC754%3E3.0.CO;2-U.
Qian, Z. 2012. “Multiscale modeling of fracture processes in cementitious materials.” Ph.D. thesis, Dept. Civil Engineering and Geosciences, Delft Univ. of Technology.
Reith, D., M. Pütz, and F. Müller-Plathe. 2003. “Deriving effective mesoscale potentials from atomistic simulations.” J. Comput. Chem. 24 (13): 1624–1636. https://doi.org/10.1002/jcc.10307.
Rezakhani, R., and G. Cusatis. 2013. “Generalized mathematical homogenization of the lattice discrete particle model.” In Proc., 8th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013, 261–271. Bayonne, France: FramCosX.
Rezakhani, R., and G. Cusatis. 2016. “Asymptotic expansion homogenization of discrete fine-scale models with rotational degrees of freedom for the simulation of quasi-brittle materials.” J. Mech. Phys. Solids 88 (Mar): 320–345. https://doi.org/10.1016/j.jmps.2016.01.001.
Rezakhani, R., X. Zhou, and G. Cusatis. 2017. “Adaptive multiscale homogenization of the lattice discrete particle model for the analysis of damage and fracture in concrete.” Int. J. Solids Struct. 125 (Oct): 50–67. https://doi.org/10.1016/j.ijsolstr.2017.07.016.
Robertson, I. N., and G. P. Johnson. 2015. “Learning through hands-on reinforced concrete beam experiments.” Concr. Int. 37 (7): 40–45.
Schlangen, E., and J. van Mier. 1992. “Simple lattice model for numerical simulation of fracture of concrete materials and structures.” Mater. Struct. 25 (9): 534–542. https://doi.org/10.1007/BF02472449.
Schöberl, M., N. Zabaras, and P.-S. Koutsourelakis. 2017. “Predictive coarse-graining.” J. Comput. Phys. 333 (Mar): 49–77. https://doi.org/10.1016/j.jcp.2016.10.073.
Sun, B., X. Wang, and Z. Li. 2015. “Meso-scale image-based modeling of reinforced concrete and adaptive multi-scale analyses on damage evolution in concrete structures.” Comput. Mater. Sci. 110 (Dec): 39–53. https://doi.org/10.1016/j.commatsci.2015.07.050.
Toro, S., P. J. Sánchez, P. J. Blanco, E. de Souza Neto, A. E. Huespe, and R. Feijóo. 2016. “Multiscale formulation for material failure accounting for cohesive cracks at the macro and micro scales.” Int. J. Plast. 76 (Jan): 75–110. https://doi.org/10.1016/j.ijplas.2015.07.001.
Unger, J. F., and S. Eckardt. 2011. “Multiscale modeling of concrete.” Arch. Comput. Methods Eng. 18 (3): 341. https://doi.org/10.1007/s11831-011-9063-8.
Wagner, G. J., and W. K. Liu. 2003. “Coupling of atomistic and continuum simulations using a bridging scale decomposition.” J. Comput. Phys. 190 (1): 249–274. https://doi.org/10.1016/S0021-9991(03)00273-0.
Wan, L., R. Wendner, B. Liang, and G. Cusatis. 2016. “Analysis of the behavior of ultra high performance concrete at early age.” Cem. Concr. Compos. 74 (Nov): 120–135. https://doi.org/10.1016/j.cemconcomp.2016.08.005.
Wan-Wendner, L., R. Wan-Wendner, and G. Cusatis. 2018. “Age-dependent size effect and fracture characteristics of ultra-high performance concrete.” Cem. Concr. Compos. 85 (Jan): 67–82. https://doi.org/10.1016/j.cemconcomp.2017.09.010.
Yip, M., Z. Li, B.-S. Liao, and J. Bolander. 2006. “Irregular lattice models of fracture of multiphase particulate materials.” Int. J. Fract. 140 (1–4): 113–124. https://doi.org/10.1007/s10704-006-7636-6.
Zubelewicz, A., and Z. P. Bažant. 1987. “Interface element modeling of fracture in aggregate composites.” J. Eng. Mech. 113 (11): 1619–1630. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:11(1619).
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 146 • Issue 5 • May 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 2, 2018
Accepted: Sep 26, 2019
Published online: Feb 21, 2020
Published in print: May 1, 2020
Discussion open until: Jul 21, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.