Simple Stress Substitution Approach for Computation of Stress Intensity Factors of Face-Loaded Cracks
Publication: Journal of Engineering Mechanics
Volume 145, Issue 11
Abstract
The accurate computation of stress intensity factors (SIFs) of face-loaded cracks is of significant importance for engineering practices. Based on the analytical stress field of a central crack in an infinite plane subjected to a pair of crack-face concentrated forces, a simple stress substitution approach that replaces the unknown actual stress field by that of the Williams’ solution for traction-free cracks is proposed and used in conjunction with the subregion generalized variational principle and quadrature element method (QEM) for computation of the SIF. This approach is validated by a series of representative problems, including different crack configurations and loading conditions. The comparisons between the analytical or approximate solutions and the numerical results suggest that the approach produces reasonably accurate SIFs when the size of the complementary energy subregion is confined to be 0.2–0.3 times the (half) crack length, even with the coarsest mesh. The accuracy can be further improved by smaller subregion size and smaller elemental maximum aspect ratio.
Get full access to this article
View all available purchase options and get full access to this article.
References
Belytschko, T., and T. Black. 1999. “Elastic crack growth in finite elements with minimal remeshing.” Int. J. Numer. Methods Eng. 45 (5): 601–620. https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5%3C601::AID-NME598%3E3.0.CO;2-S.
Bueckner, H. F. 1970. “Novel principle for the computation of stress intensity factors.” Z. Angew. Math. Mech. 50 (9): 529–546.
Fett, T. 2008. Stress intensity factors: T-stresses: Weight functions. Karlsruhe, Germany: Univ. of Karlsruhe.
Gross, B., J. E. Srawley, and W. F. Brown, Jr. 1964. Stress-intensity factors for a single-edge-notch tension specimen by boundary collocation of a stress function. Cleveland: National Aeronautics and Space Administration.
Hartranft, R. J., and G. C. Sih. 1972. Alternating method applied to edge and surface crack problems. Hampton, VA: National Aeronautics and Space Administration.
Liao, M., A. Tang, Y. G. Hu, and Z. Guo. 2015. “Computation of coefficients of crack-tip asymptotic fields using the weak form quadrature element method.” J. Eng. Mech. 141 (8): 04015018. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000904.
Liu, X. Y., Q. Z. Xiao, and B. L. Karihaloo. 2004. “XFEM for direct evaluation of mixed mode SIFs in homogeneous and bi-materials.” Int. J. Numer. Methods Eng. 59 (8): 1103–1118. https://doi.org/10.1002/nme.906.
Long, Y. 1981. “Piecewise generalized variation principles in elasticity.” [In Chinese.] Chin. Q. Mech. 2 (2): 175–184.
Moës, N., J. Dolbow, and T. Belytschko. 1999. “A finite element method for crack growth without remeshing.” Int. J. Numer. Methods Eng. 46 (1): 131–150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1%3C131::AID-NME726%3E3.0.CO;2-J.
Murakami, Y. 1987. Stress intensity factors handbook. New York: Pergamon Press.
Muskhelishvili, N. I. 1977. Some basic problems of the mathematical theory of elasticity. Dordrecht, Netherlands: Springer.
Newman, J. C., Jr. 1971. An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries. Washington, DC: National Aeronautics and Space Administration.
Shih, C. F., and R. J. Asaro. 1988. “Elastic-plastic analysis of cracks on bimaterial interfaces: Part I-small scale yielding.” J. Appl. Mech. 55 (2): 299–316. https://doi.org/10.1115/1.3173676.
Stern, M., E. B. Becker, and R. S. Dunham. 1976. “A contour integral computation of mixed-mode stress intensity factors.” Int. J. Fract. 12 (3): 359–368. https://doi.org/10.1007/BF00032831.
Wang, Y., and H. Waisman. 2018. “An arc-length method for controlled cohesive crack propagation using high-order XFEM and Irwin’s crack closure integral.” Eng. Fract. Mech. 199 (Aug): 235–256. https://doi.org/10.1016/j.engfracmech.2018.05.018.
Wang, Y., H. Waisman, and I. Harari. 2017. “Direct evaluation of stress intensity factors for curved cracks using Irwin’s integral and XFEM with high-order enrichment functions.” Int. J. Numer. Methods Eng. 112 (7): 629–654. https://doi.org/10.1002/nme.5517.
Westergaard, H. M. 1939. “Bearing pressures and cracks.” J. Appl. Mech. 6 (2): A49–A53.
Wigglesworth, L. A. 1957. “Stress distribution in a notched plate.” Mathematika 4 (1): 76–96. https://doi.org/10.1112/S002557930000111X.
Williams, M. L. 1957. “On the stress distribution at the base of a stationary crack.” J. Appl. Mech. 24 (1): 109–114.
Zhong, H., and T. Yu. 2009. “A weak form quadrature element method for plane elasticity problems.” Appl. Math. Modell. 33 (10): 3801–3814. https://doi.org/10.1016/j.apm.2008.12.007.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 23, 2018
Accepted: Apr 2, 2019
Published online: Sep 3, 2019
Published in print: Nov 1, 2019
Discussion open until: Feb 3, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.