Frequency Domain State Space–Based Mode Decomposition Framework
Publication: Journal of Engineering Mechanics
Volume 145, Issue 7
Abstract
For system identification of structures using responses comprised of contributions from multiple modes, one usually decomposes responses into individual modes prior to identifying parameters such as natural frequency, damping, and mode shapes. Conventional mode decomposition techniques such as the frequency domain decomposition (FDD) and the blind source separation (BSS) have been successfully applied to estimate modal matrix (mode shapes) from output-only data. Most of these techniques are formulated in physical coordinates, so the classical damping assumption is implicitly invoked. However, structures with auxiliary damping devices, which have been increasingly incorporated into modern structures over the last several decades, represent a nonclassically damped system. This arrangement may result in modal responses that are not completely decomposed by conventional techniques. In addition, these techniques may suffer from failing to decompose closely spaced modes. To overcome these limitations, a new state space–based mode decomposition (SSBMD) framework is proposed here that involves an optimization procedure to estimate the modal matrix from the eigen problem. Furthermore, the framework can be expanded to identify mode shapes not only in the state-space coordinates but also in physical coordinates, depending on the established performance index. To validate the proposed framework, this study examined a heavily damped three-degree-of-freedom (DOF) nonclassically damped system by way of numerical simulation and the wind-induced full-scale acceleration response of a 40-story steel-framed building with closely spaced modes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Basic Science Research Program through the National Research Foundation (NRF) of Korea funded by the Ministry of Education (NRF Grant No. 2017R1D1A1B03031265) and the US National Science Foundation (NSF) (Grant Nos. CMMI-1562244 and CMMI-1612843).
References
Abazarsa, F., F. Nateghi, S. F. Ghahari, and E. Taciroglu. 2013. “Blind modal identification of non-classically damped systems from free or ambient vibration records.” Earthquake Spectra 29 (4): 1137–1157. https://doi.org/10.1193/031712EQS093M.
Al-Hussein, A., and A. Haldar. 2016. “Unscented Kalman filter with unknown input and weighted global iteration for health assessment of large structural systems.” Struct. Contr. Health Monit. 23 (1): 156–175. https://doi.org/10.1002/stc.1764.
Antoni, J., and S. Chauhan. 2013. “A study and extension of second-order blind source separation to operational modal analysis.” J. Sound Vib. 332 (4): 1079–1106. https://doi.org/10.1016/j.jsv.2012.09.016.
Bell, A. J., and T. J. Sejnowski. 1996. “Edges are independent components of natural scenes.” In Advances in neural information processing system 9. London: MIT Press.
Belouchrani, A., K. Abed-Meraim, J.-F. Cardoso, and E. Moulines. 1997. “A blind source separation technique using second-order statistics.” IEEE Trans. Sig. Process. 45 (2): 434–444. https://doi.org/10.1109/78.554307.
Ben-Israel, A., and T. N. E. Greville. 2003. Generalized inverses: Theory and application. 2nd ed. New York: Springer.
Brewick, P. T., and A. W. Smyth. 2014. “On the application of blind source separation for damping estimation of bridges under traffic loading.” J. Sound Vib. 333 (26): 7333–7351. https://doi.org/10.1016/j.jsv.2014.08.010.
Brincker, R., C.-E. Ventura, and P. Andersen. 2001a. “Damping estimation by frequency domain decomposition.” In Proc., IMAC XIX, 324–330. Bethel, CT: Society for Experimental Mechanics.
Brincker, R., L. Zhang, and P. Andersen. 2001b. “Modal identification of output-only systems using frequency domain decomposition.” Smart Mater. Struct. 10 (3): 441–445. https://doi.org/10.1088/0964-1726/10/3/303.
Campbell, S., K. C. S. Kwok, and P. A. Hitchcock. 2005. “Dynamic characteristics and wind-induced response of two high-rise residential building during typhoons.” J. Wind Eng. Ind. Aerodyn. 93 (6): 461–482. https://doi.org/10.1016/j.jweia.2005.03.005.
Cruz, C., and E. Miranda. 2017. “Evaluation of damping ratios for the seismic analysis of tall buildings.” J. Struct. Eng. 143 (1): 04016144. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001628.
Feldman, M. 2011. Hilbert transform applications in mechanical vibration. 1st ed. New York: Wiley.
Ghahari, S. F., F. Abazarsa, and E. Taciroglu. 2017. “Blind modal identification of non-classically damped structures under non-stationary excitations.” Struct. Control Health Monit. 24 (6): e1925. https://doi.org/10.1002/stc.1925.
Ghahari, S. F., M. A. Ghannad, and E. Taciroglu. 2013. “Blind identification of soil-structure systems.” Soil Dyn. Earthquake Eng. 45: 56–69. https://doi.org/10.1016/j.soildyn.2012.11.005.
Guo, Y. 2015. “Nonstationary system identification techniques.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering and Earth Sciences, Univ. of Notre Dame.
Guo, Y., and A. Kareem. 2016. “System identification through nonstationary data using time-frequency blind source separation.” J. Sound Vib. 371: 110–131. https://doi.org/10.1016/j.jsv.2016.02.011.
Guo, Y., A. Kareem, Y. Q. Ni, and W. Y. Liao. 2012. “Performance evaluation of Canton Tower under winds based on full-scale data.” J. Wind Eng. Ind. Aerodyn. 104–106: 116–128. https://doi.org/10.1016/j.jweia.2012.04.001.
Hazra, B., A. J. Roffel, S. Narasimhan, and M. D. Pandey. 2010. “Modified cross-correlation method for the blind identification of structures.” J. Eng. Mech. 136 (7): 889–897. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000133.
Huang, N. E., and S. S. P. Shen. 2014. Hilbert-Huang transform and its applications. 2nd ed. Singapore: World Scientific.
Hwang, J.-S., D.-K. Kwon, and A. Kareem. 2018. “Estimation of structural modal parameters under winds using a virtual dynamic shaker.” J. Eng. Mech. 144 (4): 04018007. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001423.
Hyvaerinen, A., J. Karhunen, and E. Oja. 2001. Independent component analysis. New York: Wiley.
Kareem, A. 1981. “Wind-excited response of buildings in higher modes.” J. Struct. Div. 107 (4): 701–706.
Kareem, A., T. Kijewski, and Y. Tamura. 1999. “Mitigation of motions of tall buildings with specific examples of recent applications.” Wind Struct. 2 (3): 201–251. https://doi.org/10.12989/was.1999.2.3.201.
Kerschen, G., F. Poncelet, and J. C. Golinval. 2007. “Physical interpretation of independent component analysis in structural dynamics.” Mech. Syst. Signal Process. 21 (4): 1561–1575. https://doi.org/10.1016/j.ymssp.2006.07.009.
Kijewski-Correa, T., et al. 2006. “Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program.” J. Struct. Eng. 132 (10): 1509–1523. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:10(1509).
Kim, D., B. K. Oh, H. S. Park, H. B. Shim, and J. Kim. 2017. “Modal identification for high-rise building structures using orthogonality of filtered response vectors.” Comput.-Aided Civ. Infrastruct. Eng. 32 (12): 1064–1084. https://doi.org/10.1111/mice.12310.
Lamarche, C. P., P. Paultre, J. Proulx, and S. Mousseau. 2008. “Assessment of the frequency domain decomposition technique by forced-vibration tests of a full-scale structure.” Earthquake Eng. Struct. Dyn. 37 (3): 487–494. https://doi.org/10.1002/eqe.766.
Le, T.-P., and P. Argoul. 2016. “Modal identification using the frequency-scale domain decomposition technique of ambient vibration responses.” J. Sound Vib. 384: 325–338. https://doi.org/10.1016/j.jsv.2016.08.019.
Li, Q., Y. Q. Xiao, J. Y. Fu, and Z. N. Li. 2007. “Full-scale measurements of wind effects on the Jin Mao Building.” J. Wind Eng. Ind. Aerodyn. 95 (6): 445–466. https://doi.org/10.1016/j.jweia.2006.09.002.
McNeill, S. I. 2011. “An analytic formulation for blind modal identification.” J. Vibr. Control 18 (14): 2111–2121. https://doi.org/10.1177/1077546311429146.
McNeill, S. I. 2013. “A modal identification algorithm combining blind source separation and state space realization.” J. Signal Inf. Process. 4 (2): 173–185. https://doi.org/10.4236/jsip.2013.42025.
McNeill, S. I., and D. C. Zimmerman. 2008. “A framework for blind modal identification using joint approximate diagonalization.” Mech. Syst. Signal Process. 22 (7): 1526–1548. https://doi.org/10.1016/j.ymssp.2008.01.010.
Petkov, P. H., N. D. Christov, and M. M. Konstantinov. 1991. Computational methods for linear control system. London: Prentice-Hall.
Poncelet, F., G. Kerschen, J. C. Golinval, and D. Verhelst. 2007. “Output-only modal analysis using blind source separation techniques.” Mech. Syst. Signal Process. 21 (6): 2335–2358. https://doi.org/10.1016/j.ymssp.2006.12.005.
Rainieri, C., and G. Fabbrocino. 2014. Operational modal analysis of civil engineering structures: An introduction and a guide for applications. New York: Springer.
Roberts, S., and R. Everson. 2001. Independent component analysis: Principles and practice. New York: Cambridge University Press.
Sadhu, A., B. Hazra, and S. Narasimhan. 2012. “Blind identification of earthquake-excited structures.” Smart Mater. Struct. 21 (4): 045019. https://doi.org/10.1088/0964-1726/21/4/045019.
Xu, Y. L., and S. Zhan. 2001. “Field measurements of Di Wang Tower during Typhoon York.” J. Wind Eng. Ind. Aerodyn. 89 (1): 73–93. https://doi.org/10.1016/S0167-6105(00)00029-5.
Zhou, W., and D. Chelidze. 2007. “Blind source separation based vibration mode identification.” Mech. Syst. Signal Process. 21 (8): 3072–3087. https://doi.org/10.1016/j.ymssp.2007.05.007.
Zhang, L., T. Wang, and Y. Tamura. 2010. “A frequency-spatial domain decomposition (FSDD) method for operational modal analysis.” Mech. Syst. Signal Process. 24 (5): 1227–1239. https://doi.org/10.1016/j.ymssp.2009.10.024.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: May 7, 2018
Accepted: Dec 5, 2018
Published online: May 9, 2019
Published in print: Jul 1, 2019
Discussion open until: Oct 9, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.