Drained Elastoplastic Solution for Cylindrical Cavity Expansion in -Consolidated Anisotropic Soil
Publication: Journal of Engineering Mechanics
Volume 143, Issue 11
Abstract
This paper presents a semianalytical solution for drained expansion of a cylindrical cavity in -consolidated clay. The solution is derived based on the -based anisotropic modified Cam-clay model (-AMCC), which can properly consider the initial stress anisotropy and the initial stress-induced anisotropy of natural soils. Parametric studies are carried out to investigate the effects of different overconsolidation ratios on the growth of plastic zone and cavity pressure, the distributions of the stress components and the specific volume around the cavity, and the effective stress path. The results are compared with the published solution based on the modified Cam-clay model to study the effects of the initial stress anisotropy and the initial stress-induced anisotropy on the cylindrical cavity expansion. The present solution provides a more realistic interpretation for practical geotechnical engineering problems such as pressuremeter tests and cone penetration tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research work was supported by the National Natural Science Foundation of China (with Grant Nos. 41272288 and 41572267). The anonymous reviewers’ comments have improved the quality of this paper and are also greatly appreciated.
References
Cao, L. F., Teh, C. I., and Chang, M. F. (2001). “Undrained cavity expansion in modified Cam clay.” Géotechnique, 51(4), 323–334.
Carter, J. P., Booker, J. R., and Yeung, S. K. (1986). “Cavity expansion in cohesive frictional soils.” Géotechnique, 36(3), 349–358.
Carter, J. P., Randolph, M. F., and Wroth, C. P. (1979). “Stress and pore pressure changes in clay during and after the expansion of a cylindrical cavity.” Int. J. Numer. Anal. Methods Geomech., 3(4), 305–322.
Chang, M. F., Teh, C. I., and Cao, L. F. (2001). “Undrained cavity expansion in modified Cam clay. II: Application to the interpretation of the piezocone test.” Géotechnique, 51(4), 335–350.
Chen, S. L., and Abousleiman, Y. N. (2012). “Exact undrained elastoplastic solution for cylindrical cavity expansion in modified Cam clay soil.” Géotechnique, 62(5), 447–456.
Chen, S. L., and Abousleiman, Y. N. (2013). “Exact drained solution for cylindrical cavity expansion in modified Cam clay soil.” Géotechnique, 63(6), 510–517.
Collins, I. F., and Stimpson, J. R. (1994). “Similarity solutions for drained and undrained cavity expansions in soils.” Géotechnique, 44(1), 21–34.
Collins, I. F., and Yu, H. S. (1996). “Undrained cavity expansions in critical state soils.” Int. J. Numer. Anal. Methods Geomech., 20(7), 489–516.
Falagush, O., McDowell, G. R., Yu, H. S., and de Bono, J. P. (2015). “Discrete element modelling and cavity expansion analysis of cone penetration testing.” Granular Matter, 17(4), 483–495.
Frikha, W., and Bouassida, M. (2013). “Cylindrical cavity expansion in elastoplastic medium with a variable potential flow.” Int. J. Geomech., 9–15.
Guo, W. D. (2000). “Visco-elastic consolidation subsequent to pile installation.” Comput. Geotech., 26(2), 113–144.
Hill, R. (1950). The mathematical theory of plasticity, Oxford University Press, London.
Lamé, G. (1852). Leçons sur la théorie mathématiques de l’élasticité des corps solides, Bachelier, Paris (in French).
Li, L., Li, J., and Sun, D. A. (2016a). “Anisotropically elasto-plastic solution to undrained cylindrical cavity expansion in -consolidated clay.” Comput. Geotech., 73, 83–90.
Li, L., Li, J., Sun, D. A., and Gong, W. (2017). “Analysis of time-dependent bearing capacity of a driven pile in clayey soils by total stress method.” Inter. J. Geomech., 04016156.
Li, J., Li, L., Sun, D. A., and Rao, P. (2016b). “Analysis of undrained cylindrical cavity expansion considering three-dimensional strength of soils.” Int. J. Geomech., 04016017.
Mabsout, M. E., Sadek, S. M., and Smayra, T. E. (1999). “Pile driving by numerical cavity expansion.” Int. J. Numer. Anal. Methods Geomech., 23(11), 1121–1140.
Marshall, A. M. (2012). “Tunnel-pile interaction analysis using cavity expansion methods.” J. Geotech. Geoenviron. Eng., 1237–1246.
Matsuoka, H., and Sun, D. A. (2006). The SMP concept-based 3D constitutive models for geomaterials, Taylor & Francis, London.
Mo, P. Q., Marshall, A. M., and Yu, H. S. (2017). “Interpretation of cone penetration test data in layered soils using cavity expansion analysis.” J. Geotech. Geoenviron. Eng., 04016084.
Mo, P. Q., and Yu, H. S. (2017). “Undrained cavity expansion analysis with a unified state parameter model for clay and sand.” Géotechnique, 67(6), 503–515.
Randolph, M. F. (2003). “Science and empiricism in pile foundation design.” Géotechnique, 53(10), 847–875.
Randolph, M. F., Carter, J. P., and Wroth, C. P. (1979). “Driven piles in clay-the effects of installation and subsequent consolidation.” Géotechnique, 29(4), 361–393.
Roscoe, K. H., Schofield, A., and Thurairajah, A. (1963). “Yielding of clays in states wetter than critical.” Géotechnique, 13(3), 211–240.
Schofield, A., and Wroth, P. (1968). Critical state soil mechanics, McGraw-Hill, New York.
Vesic, A. S. (1972). “Expansion of cavities in infinite soil mass.” J. Soil Mech. Found. Div., 98(SM3), 265–290.
Vrakas, A., and Anagnostou, G. (2015). “Finite strain elastoplastic solutions for the undrained ground response curve in tunnelling.” Int. J. Numer. Anal. Methods Geomech., 39(7), 738–761.
Wood, D. M. (1990). Soil behaviour and critical state soil mechanics, Cambridge University Press, Cambridge, U.K.
Yao, Y. P., Hou, W., and Zhou, A. N. (2009). “UH model: Three-dimensional unified hardening model for overconsolidated clays.” Géotechnique, 59(5), 451–469.
Yu, H. S. (2000). Cavity expansion methods in geomechanics, Kluwer Academic Publishers, Dordrecht, Netherlands.
Yu, H. S., and Rowe, R. K. (1999). “Plasticity solutions for soil behaviour around contracting cavities and tunnels.” Int. J. Numer. Anal. Methods Geomech., 23(12), 1245–1279.
Yu, H. S., Schnaid, F., and Collins, I. F. (1996). “Analysis of cone pressuremeter tests in sands.” J. Geotech. Eng., 623–632.
Zhou, H., Kong, G., and Liu, H. (2016). “A semi-analytical solution for cylindrical cavity expansion in elastic-perfectly plastic soil under biaxial in situ stress field.” Géotechnique, 66(7), 584–595.
Zhou, H., Liu, H., Kong, G., and Huang, X. (2014). “Analytical solution of undrained cylindrical cavity expansion in saturated soil under anisotropic initial stress.” Comput. Geotech., 55, 232–239.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jul 28, 2016
Accepted: May 24, 2017
Published online: Sep 11, 2017
Published in print: Nov 1, 2017
Discussion open until: Feb 11, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.