Hydrostatic Pressure Load in Pipes Modeled Using Beam Finite Elements: Theoretical Discussions and Applications
Publication: Journal of Engineering Mechanics
Volume 143, Issue 4
Abstract
This work presents a derivation of equivalent loads, coming from the integration of hydrostatic pressure fields on the internal and external walls of a curved pipe, which is modeled as a Euler-Bernoulli beam. To achieve that, the divergence theorem is applied to an infinitesimal-length pipe element. The Frenet coordinate system is used, leading to convenient simplifications. Finally, an expression is obtained for the equivalent distributed load along the pipe, due to pressure fields. Such load has a follower behavior and is curvature-dependent. Discussions are made, revisiting the effective tension and effective moment classical concepts, such as relating the proposed derivation with those concepts. An example of application is made in the context of analytical beam models, which is compared to a solid finite element model, experiencing a hydrostatic pressure field. Lastly, the obtained formulas are applied to an example of nonlinear buckling analysis of an initially straight pipeline, under constant internal pressurization. The postcritical configuration is obtained by using a geometric nonlinear finite element model, composed of beams, which are loaded using the expressions derived in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author acknowledges the financial support from FAPESP (Fundação de Amparo à Pesquisa do Estado de São Paulo) under the Grant No. 2015/11655-3. The authors also acknowledge the support by CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico) under the Grant Nos. 308190/2015-7, 303091/2013-4, and 310329/2012-4.
References
ANSYS version 16.0 [Computer software]. ANSYS, Canonsburg, PA.
Bai, Y. (2001). Pipelines and risers, Vol. 3, Elsevier, Oxford, U.K.
Bazant, Z. P., and Cedolin, L. (2003). Stability of structures, Dover, New York.
Chakrabarti, S. K., and Frampton, R. E. (1982). “Review of riser analysis techniques.” App. Ocean Res., 4(2), 73–90.
Dvorkin, E. N., and Toscano, R. G. (2001). “Effects of internal/external pressure on the global buckling of pipelines.” First MIT Conf. on Computational Fluid and Solid Mechanics, Elsevier, New York.
Dym, C. L., and Williams, H. E. (2011). “Stress and displacement estimates for arches.” J. Struct. Eng., 49–58.
Einsfeld, R. A., Murray, D. W., and Yoosef-Ghodsi, N. (2003). “Buckling analysis of high-temperature pressurized pipelines with soil-structure interaction.” J. Braz. Soc. Mech. Sci. Eng., 25(2), 164–169.
Fyrileiv, O., and Collberg, L. (2005). “Influence of pressure in pipeline design—Effective axial force.” Proc., 24th Int. Conf. on Offshore Mechanics and Arctic Engineering.
Gay Neto, A. (2012). “Structural stability of the static configuration of catenary risers.” Ph.D. thesis, Univ. of São Paulo, São Paulo, Brazil.
Gay Neto, A. (2014). “Generic interface readily accessible for finite elements (GIRAFFE) user’s manual.” ⟨sites.poli.usp.br/p/alfredo.gay⟩ (Jul. 21, 2016).
Gay Neto, A., Martins, C. A., and Pimenta, P. M. (2014). “Static analysis of offshore risers with a geometrically-exact 3D beam model subjected to unilateral contact.” Comp. Mech., 53(1), 125–145.
Guesnon, J., Gaillard, Ch., and Richard, F. (2002). “Ultra-deep water drilling riser design and relative technology.” Oil Gas Sci. Technol., 57(1), 39–57.
Hobbs, R. E. (1981). “Pipeline buckling caused by axial loads.” J. Constr. Steel Res., 1(2), 2–10.
Hobbs, R. E. (1984). “In-service buckling of heated pipelines.” J. Transp. Eng., 175–189.
Karampour, H., Albermani, F., and Gross, J. (2013). “On lateral and upheaval buckling of subsea pipelines.” Eng. Struct., 52, 317–330.
Li, Z. (2013). “Using the fictitious force to judge the stability of pipe string is wrong.” Open Pet. Eng. J., 6(1), 57–60.
Palmer, A. C., and Baldry, J. A. S. (1974). “Lateral buckling of axially constrained pipelines.” J. Pet. Technol., 26(11), 1283–1284.
Patel, M. H., and Seyed, F. B. (1995). “Review of flexible riser modelling and analysis techniques.” Eng. Struct., 17(4), 293–304.
Rajasekaran, S., and Padmanabhan, S. (1989). “Equations of curved beams.” J. Eng. Mech., 1094–1111.
Seyed, F. B., and Patel, M. H. (1992). “Mathematics of flexible risers including pressure and internal flow effects.” Mar. Struct., 5(2–3), 121–150.
Sparks, C. P. (1984). “The influence of tension, pressure and weight on pipe and riser deformations and stresses.” J. Energy Res. Technol., 106(1), 46–54.
Sparks, C. P. (2007). Fundamentals of marine riser mechanics, PennWell Corporation, Tulsa, OK.
Taylor, N., and Gan, A. B. (1986). “Submarine pipeline: Buckling imperfection studies.” Thin Walled Struct., 4(4), 295–323.
Topogonov, V. A. (2006). Differential geometry of curves and surfaces—A concise guide, Birkhauser, Boston.
Vedeld, K., Sollund, H. A., Hellesland, J., and Fyrileiv, O. (2014). “Effective axial forces in offshore lined and clad pipes.” Eng. Struct., 66, 66–80.
Young, W. C., and Budynas, R. G. (2002). Roark’s formulas for stress and strain, McGraw-Hill, New York.
Zeng, X., Duan, M., and Che, X. (2014). “Critical upheaval buckling forces of imperfect pipelines.” Appl. Ocean Res., 45, 33–39.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 7, 2015
Accepted: Sep 2, 2016
Published ahead of print: Jan 22, 2017
Published online: Jan 23, 2017
Published in print: Apr 1, 2017
Discussion open until: Jun 23, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.