Numerical Evaluation of Moisture Warping and Stress in Concrete Pavement Slabs with Different Water-to-Cement Ratio and Thickness
Publication: Journal of Engineering Mechanics
Volume 143, Issue 2
Abstract
For better performance evaluation, it is of significance to investigate the factors affecting moisture distribution in concrete pavement slabs. This study provides methodology on both experimental measurement and numerical simulation of moisture distribution in concrete slabs with three water-to-cement (w/c) ratios of 0.3, 0.4, and 0.5. The effects of w/c ratio, slab thickness, and the environmental conditions on moisture distribution are evaluated in terms of the equivalent temperature difference, slab corner uplift, and the maximum tensile stress generated in concrete pavement slabs. A model is proposed for predicting the relative humidity profile along the slab depth. An equivalent temperature difference is used to quantify the moisture gradient effect. Greater is obtained in thin concrete slabs with high w/c ratio and when exposed to lower environmental relative humidity conditions. This renders concrete slab to excessive warping and tensile stress at the slab top surface when combined with traffic loadings. A thick slab with low w/c ratio possibly might reduce the warping deformation and the maximum tensile stress.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This material is on the basis of work supported by the National Natural Science Foundation of China under Grant No. 51578316.
References
Akita, H., Fujiwara, T., and Ozaka, Y. (1997). “A practical procedure for the analysis of moisture transfer within concrete due to drying.” Mag. Concr. Res., 49(179), 129–137.
ASTM. (2011). “Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes.” ASTM CI 1585-11, West Conshohocken, PA.
Bažant, Z. P. (1988). Mathematical modeling of creep and shrinkage of concrete, Wiley, Chichester, U.K.
Bažant, Z. P., and Najjar, L. J. (1972). “Nonlinear water diffusion in nonsaturated concrete.” Mater. Struct., 5(1), 3–20.
Bentz, D. P., Ehlen, M. A., Ferraris, C. F., and Garboczi, E. J. (2001). “Sorptivity based service life predictions for concrete pavements.” Proc., 7th Int. Conf. on Concrete Pavements, NIST, Gaithersburg, MD, 181–193.
Bissonnette, B., Attiogbe, E., Miltenberger, M., and Fortin, C. (2007). “Drying shrinkage, curling, and joint opening of slabs-on-ground.” ACI Mater. J., 104(3), 259–267.
Crank, J. (1975). The mathematics of diffusion, 2nd Ed., Clarendon Press, Oxford, U.K.
Hall, C. (1989). “Water sorptivity of mortars and concretes: A review.” Mag. Concr. Res., 41(147), 51–61.
Hansen, M. H., and Hansen, E. (2002). “Determination of liquid diffusivity using single point moisture content measurements and Boltzmann’s transformation.” 6th Nordic Symp. on Building Physics, TAPIR Akademisk Forlag, Trondheim, Norway, 389–396.
Janssen, D. J. (1987). “Moisture in portland cement concrete.” J. Transp. Res. Board, 1121, 40–44.
Jensen, O. M. (1995). “Thermodynamic limitation of self-desiccation.” Cem. Concr. Res., 25(1), 157–164.
Khazanovich, L., Yu, H. T., Rao, S., Galasova, K., Shats, E., and Jones, R. (2000). “ISLAB2000—Finite element analysis program for rigid and composite pavements, user’s guide.” ERES Division of ARA, Champaign, IL.
Lockington, D. A., and Parlange, J. Y. (2003). “Anomalous water absorption in porous materials.” J. Phys. D: Appl. Phys., 36(6), 760–767.
MATLAB [Computer software]. Math Works, Natick, MA.
McCarter, W. J., Ezirim, H., and Emerson, M. (1992). “Absorption of water and chloride into concrete.” Mag. Concr. Res., 44(158), 31–37.
Neithalath, N. (2006). “Analysis of moisture transport in mortars and concrete using sorption-diffusion approach.” ACI Mater. J., 103(3), 209–217.
Nielsen, L. F. (2007). “Moisture sorption in porous materials.” Technical Univ. of Denmark, Lyngby, Denmark.
Nilsson, L. O., and Mjornell, K. A. (2005). “Macro-model for self-desiccation in high performance concrete.” Proc., 4th Int. Research Seminar on Self-Desiccation and Its Importance in Concrete Technology, Gaithersburg, MD, 49–66.
Oh, B., and Cha, S. (2003). “Nonlinear analysis of temperature and moisture distributions in early-age concrete structures based on degree of hydration.” ACI Mater. J., 100(5), 361–370.
Powers, T. C., and Brownyard, T. L. (1946). “Studies of the physical properties of hardened Portland cement paste.” J. Proc., 43(9), 101–132.
Springenschmid, R., and Plannerer, M. (2001). “Experimental research on the test methods for surface cracking of concrete.” Institute for Building Materials, Technical Univ., Munich, Germany.
Suprenant, B. A. (2002). “Why slabs curl. Part II: Factors affecting the amount of curling.” Concr. Int., 24(4), 59–64.
Wei, Y., Gao, X., and Hansen, W. (2013). “Influential depth by water absorption and surface drying in concrete slabs.” J. Transp. Res. Board, 2342, 76–82.
Wei, Y., and Hansen, W. (2011). “Characteristic of moisture transport and its effect on deformations in jointed plain concrete pavement.” Transp. Res. Rec., 2240, 9–15.
Wei, Y., Hansen, W., Biernacki, J. J., and Schlangen, E. (2011). “Unified shrinkage model for concrete from autogenous shrinkage test on paste with and without GGBFS.” ACI Mater. J., 108(1), 13–20.
Wong, S. F., Wee, T. H., Swaddiwudhipong, S., and Lee, S. L. (2001). “Study of water movement in concrete.” Mag. Concr. Res., 53(3), 205–220.
Ytterberg, R. F. (1987). “Shrinkage and curling of slabs on grade. Part III—Additional suggestions.” Concr. Int., 9, 72–81.
Zhang, J., Qi, K., and Huang, Y. (2009). “Calculation of moisture distribution in early-age concrete.” J. Eng. Mech., 871–880.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Nov 25, 2013
Accepted: Aug 23, 2016
Published online: Oct 28, 2016
Published in print: Feb 1, 2017
Discussion open until: Mar 28, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.