Prediction Error Variances in Bayesian Model Updating Employing Data Sensitivity
Publication: Journal of Engineering Mechanics
Volume 142, Issue 12
Abstract
Efficiency of a Bayesian model updating algorithm is greatly affected by the choice of variance of prediction error models of different data points (evidence) used for model updating. In the context of structural model updating, a sensitivity-based novel approach is proposed in this work to find these variances without increasing the dimensionality of the model updating problem. Well-established relations of modal data sensitivity toward structural parameters are incorporated in the Bayesian framework to evaluate the prediction error variances. A high-rise shear building is considered for numerical illustration of the approach. Markov chain Monte Carlo (MCMC) simulation technique is employed using the Metropolis-Hastings algorithm to simulate the samples from the posterior distribution. Results are presented as a comparison of unknown parameters obtained using the proposed approach and an approach in which all prediction error variances are assumed to be equal. The study shows that the proposed approach is highly efficient in extracting appropriate information from the data, and therefore enhancing the efficiency of Bayesian algorithm. It also illustrates that the damage locations play an important role in the selection of variances of prediction error models. Furthermore, each data point of evidence can be very effective in estimating the model parameters, if the information contained in the data is exploited effectively.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adhikari, S. (1999). “Rates of change of eigenvalues and eigenvectors in damped dynamic system.” AIAA J., 37(11), 1452–1458.
Beck, J. L., and Au, S. K. (2002). “Bayesian updating of structural models and reliability using Markov chain Monte Carlo simulation.” J. Eng. Mech., 380–391.
Beck, J. L., and Katafygiotis, L. S. (1998). “Updating models and their uncertainties. I: Bayesian statistical framework.” J. Eng. Mech., 455–461.
Beck, J. L., and Yuen, K.-V. (2004). “Model selection using response measurements: Bayesian probabilistic approach.” J. Eng. Mech., 192–203.
Behmanesh, I., Moaveni, B., Lombaert, G., and Papadimitriou, C. (2015). “Hierarchical Bayesian model updating for structural identification.” Mech. Syst. Signal Process., 64, 360–376.
Boulkaibet, I., Marwala, T., Mthembu, L., Friswell, M. I., and Adhikari, S. (2012). “Sampling techniques in Bayesian finite element model updating.” Topics in model validation and uncertainty quantification, Vol. 4, Springer, New York, 75–83.
Chen, L., Qin, Z., and Liu, J. S. (2001). “Exploring hybrid Monte Carlo in Bayesian computation.” ISBA Eurostat, 6, 1–10.
Cheung, S. H., and Beck, J. L. (2009). “Bayesian model updating using hybrid Monte Carlo simulation with application to structural dynamic models with many uncertain parameters.” J. Eng. Mech., 243–255.
Cheung, S. H., and Beck, J. L. (2010). “Calculation of posterior probabilities for Bayesian model class assessment and averaging from posterior samples based on dynamic system data.” Comput.-Aided Civ. Infrastruct. Eng., 25(5), 304–321.
Ching, J., and Chen, Y. C. (2007). “Transitional Markov chain Monte Carlo method for Bayesian model updating, model class selection, and model averaging.” J. Eng. Mech., 816–832.
Ching, J., Muto, M., and Beck, J. L. (2005). “Bayesian linear structural model updating using Gibbs sampler with modal data.” Proc., 9th Int. Conf. on Structural Safety and Reliability, Millpress, Rotterdam, Netherlands, 2609–2616.
Ching, J., Muto, M., and Beck, J. L. (2006). “Structural model updating and health monitoring with incomplete modal data using Gibbs sampler.” Comput.-Aided Civ. Infrastruct. Eng., 21(4), 242–257.
Christodoulou, K., and Papadimitriou, C. (2007). “Structural identification based on optimally weighted modal residuals.” Mech. Syst. Signal Process., 21(1), 4–23.
Fox, R. L., and Kapoor, M. P. (1968). “Rates of change of eigenvalues and eigenvectors.” AIAA J., 6(12), 2426–2429.
Goller, B., Beck, J. L., and Schueller, G. I. (2011). “Evidence-based identification of weighting factors in Bayesian model updating using modal data.” J. Eng. Mech., 430–440.
Goller, B., and Schueller, G. I. (2011). “Investigation of model uncertainties in Bayesian structural model updating.” J. Sound Vibr., 330(25), 6122–6136.
Haralampidis, Y., Papadimitriou, C., and Pavlidou, M. (2005). “Multi-objective framework for structural model identification.” Earthquake Eng. Struct. Dyn., 34(6), 665–685.
Hung, C. S., and Bansal, S. (2013). “A new Gibbs-sampling based algorithm for Bayesian model updating of linear dynamic systems with incomplete complex modal data.” Proc., Int. Multi Conf. of Engineers and Computer Scientists, Vol. 2, Newswood, Hong Kong.
Jaynes, E. T. (2003). Probability theory: The logic of science, Cambridge University Press, Cambridge, U.K.
Katafygiotis, L. S., and Lam, H. F. (2002). “Tangential-projection algorithm for manifold representation in unidentifiable model updating problems.” Earthquake Eng. Struct. Dyn., 31(4), 791–812.
Katafygiotis, L. S., Papadimitriou, C., and Lam, H. F. (1998). “A probabilistic approach to structural model updating.” Soil Dyn. Earthquake Eng., 17(7), 495–507.
Marwala, T. (2010). “Finite-element-model updating using a Bayesian approach.” Finite-element-model updating using computional intelligence techniques: Applications to structural dynamics, Springer, New York, 183–201.
Mthembu, L., Marwala, T., Friswell, M. I., and Adhikari, S. (2008). “Bayesian evidence for finite element model updating.” http://arxiv.org/abs/0810.2643.
Nelson, R. B. (1976). “Simplified calculation of eigenvector derivatives.” AIAA J., 14(9), 1201–1205.
Papadimitriou, C., Argyris, C., Papadioti, D. C., and Panetsos, P. (2014). “Uncertainty calibration of large-order models of bridges using ambient vibration measurements.” EWSHM 7th European Workshop on Structural Health Monitoring, HAL.
Papadimitriou, C., Beck, J. L., and Katafygiotis, L. S. (1997). “Asymptotic expansions for reliability and moments of uncertain systems.” J. Eng. Mech., 1219–1229.
Papadimitriou, C., Beck, J. L., and Katafygiotis, L. S. (2001). “Updating robust reliability using structural test data.” Probab. Eng. Mech., 16(2), 103–113.
Rogers, L. C. (1970). “Derivatives of eigenvalues and eigenvectors.” AIAA J., 8(5), 943–944.
Roy, K., and Ray-Chaudhuri, S. (2013). “Fundamental mode shape and its derivatives in structural damage localization.” J. Sound Vibr., 332(21), 5584–5593.
Simoen, E., Moaveni, B., Conte, J. P., and Lombaert, G. (2013a). “Uncertainty quantification in the assessment of progressive damage in a 7-story full-scale building slice.” J. Eng. Mech., 1818–1830.
Simoen, E., Papadimitriou, C., and Lombaert, G. (2013b). “On prediction error correlation in Bayesian model updating.” J. Sound Vibr., 332(18), 4136–4152.
Smith, D. E., and Siddhi, V. (2006). “A generalized approach for computing eigenvector design sensitivities.” Proc., SEM Annual Conf. and Exposition on Experimental and Applied Mechanics, Society Experimental Mechanics (SEM).
Vanik, M. W., Beck, J. L., and Au, S. K. (2000). “Bayesian probabilistic approach to structural health monitoring.” J. Eng. Mech., 738–745.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 25, 2015
Accepted: Jun 28, 2016
Published online: Aug 16, 2016
Published in print: Dec 1, 2016
Discussion open until: Jan 16, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.